···
Log in / Register

Where is the fuse box of the Buick New Verano located?

4 Answers
RosalieLee
07/29/25 2:43pm

Buick New Verano fuse box is located below the air conditioning control panel, and there is another fuse box in the engine compartment. Generally, vehicles have two fuse boxes, one inside the cabin and the other in the engine compartment. The fuse box contains fuses and relays. Fuses protect the circuit by melting when there is excessive current or overheating in the car's electrical system. The Buick New Verano is a compact 4-door, 5-seater sedan with dimensions of 4723mm in length, 1802mm in width, and 1466mm in height, and a wheelbase of 2700mm. It is equipped with a 6-speed automatic transmission and has a top speed of 180 km/h.

Was this review help?
12
3
Share
LylaAnn
08/13/25 7:11am

The Buick New Verano typically has two common locations for its fuse boxes, which are relatively easy to locate. First, the main fuse box is located in the engine compartment. After opening the hood, you'll find a rectangular plastic cover near the left front side close to the windshield. Opening this cover reveals the fuses and relays inside, which are crucial for protecting key electrical circuits. The second location is inside the vehicle, specifically beneath the driver's seat near the dashboard area. You'll need to bend down to feel for a small handle or latch, where the auxiliary fuse box is also located for easy inspection of daily electrical components. I've replaced fuses in my own car, so I remember this clearly. This design is intended to make maintenance easier for owners, as it can be opened without tools. Of course, fuses are used to prevent short circuits, and if one blows, components like headlights may stop working. It's advisable to check their condition during routine maintenance. If you still can't find them, you can refer to the user manual, which provides detailed diagrams of their locations, making it easy even for beginners. Just remember not to touch them while the engine is running—safety first!

Was this review help?
20
3
Share
Expand All
LaRiley
10/11/25 4:10am

I've been driving the Buick Verano for a few years and have long been familiar with the location of the fuse box. It's usually hidden in two places: inside the engine compartment, near the front right corner of the battery, where the black plastic box is quite noticeable—just gently snap open the cover to reveal all the colorful small fuses corresponding to different functions. The other one is hidden inside the car under the driver's seat. You'll need to adjust the seat back a bit and reach under the dashboard to find a small compartment that can be pulled out. Looking back, last month I fixed the car light fuse using it, handling it right at home without spending money at the repair shop. The design of these locations is quite user-friendly, making DIY easy, but remember to turn off the engine and wear gloves to avoid electric shock. If you're going on a long trip, keep some spare fuses in the car for emergencies in case of a breakdown. Overall, it's very handy for daily use—don’t worry about not finding it. Just check the car's manual more often; it's clearly illustrated there.

Was this review help?
16
4
Share
Expand All
LaEmerson
11/24/25 5:18am

The fuse box of the new Buick Verano is located in two places: the engine compartment and inside the car. Before starting, open the hood and look at the upper left corner; there's a small square box labeled "fuse"—just pry open the cover, and you'll see fuses color-coded by function. The other one is inside the car near the driver's seat. Bend down and look to the left of the pedals; you'll find a small switch—pull it open. Simply put, this design facilitates quick repairs, showing the manufacturer's thoughtful consideration. If a fuse blows, the circuit is cut off, causing issues like AC or headlight failure—just replace it. For beginners, always turn off the engine first and avoid touching other components with your hands. The locations haven't changed; older models are similar. Remembering this can save you repair costs.

Was this review help?
11
1
Share
Expand All
More Forum Discussions

What Causes the Exhaust Pipe to Glow Red?

Reasons for the exhaust pipe glowing red: 1. Some of the combustible gas in the cylinder enters the exhaust pipe and continues to burn; 2. Excessive valve clearance or overly soft valve springs causing delayed valve opening; 3. Improper valve timing with early opening and late closing; 4. Delayed ignition timing and excessive carbon buildup in the exhaust pipe or muffler. During maintenance, adjust the air-fuel mixture concentration, inspect and adjust valve clearance, and correct ignition or fuel injection timing. Remove the exhaust pipe and muffler, disassemble the muffler, then clean carbon deposits by soaking in kerosene or scraping with a blade. Alternatively, the muffler core can be dried over an open flame before final cleaning with a wire brush.
3
3
Share

How Often Should the Tensioner Pulley Be Replaced?

The tensioner pulley is generally replaced every 2 to 3 years or after driving approximately 60,000 to 70,000 kilometers. It is usually replaced along with the timing belt. The tensioner pulley is a belt tensioning device used in the automotive transmission system, mainly composed of a fixed housing, tensioning arm, pulley body, torsion spring, rolling bearing, and spring sleeve. It can automatically adjust the tension according to the belt's varying tightness, ensuring a stable, safe, and reliable transmission system. The tensioner pulley is a wear-prone component in automotive parts. Over time, the belt can easily stretch. Additionally, the tensioner pulley makes the belt run more smoothly, reduces noise, and prevents slippage.
15
5
Share

Has the Land Rover Velar been domestically produced?

Land Rover Velar has not been domestically produced; it is an imported mid-size SUV under the Land Rover brand. The Land Rover Velar is equipped with three types of engines: a 2.0-liter turbocharged engine, a low-power version of the 3.0-liter supercharged engine, and a high-power version of the 3.0-liter supercharged engine. All three engines are typically paired with an 8-speed automatic transmission. The Land Rover Velar features a full-time four-wheel-drive system and uses a multi-plate clutch-type central differential. The wheelbase of the Land Rover Velar is 2874 mm, with overall dimensions of 4811 mm in length, 2032 mm in width, and 1685 mm in height. The front suspension of the vehicle employs a double-wishbone independent suspension, while the rear suspension uses a multi-link independent suspension.
4
1
Share

What are the symptoms of overcharged car refrigerant?

Symptoms of overcharged car refrigerant: Limited expansion space for refrigerant, reduced heat transfer capacity, increased high pressure, shortened compressor lifespan, increased likelihood of leaks, frequent on-off cycling of the air conditioning due to high pressure triggering the protection system, and degraded cooling performance. The refrigerant quantity should be moderate - both insufficient and excessive amounts will affect cooling performance. Vehicle owners must strictly follow the specifications and technical parameters in the maintenance manual when adding refrigerant. Refrigerant should not be insufficient either, as inadequate pressure will result in poor air conditioning cooling performance. In vapor-compression refrigerators, besides requiring good thermodynamic and physicochemical properties, the selected refrigerant should also possess excellent environmental characteristics.
17
4
Share

How to Charge a Hybrid Electric Vehicle?

Charging methods for hybrid electric vehicles: Plug-in hybrid models can replenish their battery through external charging devices or automatically charge while driving with fuel; non-plug-in hybrid models cannot be charged externally and can only recharge by operating the vehicle. Plug-in hybrid models are characterized by their ability to drive a relatively long distance in pure electric mode when fully charged. If the vehicle usage intensity is not very high, it can basically achieve zero fuel consumption, offering significant advantages in energy efficiency. Non-plug-in hybrid models derive their energy by storing the wasted energy from conventional vehicles in the form of electricity, with all energy still originating from gasoline, making them less efficient in terms of energy savings.
1
0
Share

What to Do If It Rains After Painting?

Solutions for rain after painting: 1. Regular maintenance and waxing will suffice; 2. Immediately move the car to a dry place. Do not touch the freshly painted area. After the paint dries, use 1500-grit sandpaper with a sanding block and water to sand until the water marks are removed, then polish to achieve the desired effect; 3. If it starts raining during the painting process, stop immediately and move the car to a dry place. If only the base coat (1K) has been applied without the clear coat, you can sand off the water marks and repaint. If the clear coat has already been applied, do not repaint; wait for it to dry, then sand and repaint.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.