Where is the fuse box of Hanteng x5?

1 Answers
DerekAnn
07/30/25 8:20am
Hanteng x5 has two fuse boxes, one is located in the engine compartment, and the other is on the left side of the steering wheel. Here are some introductions about the fuse box: 1. Introduction: The fuse box is a box for installing fuses, which facilitates the installation of fuses and has functions such as waterproof, fireproof, and high-temperature resistance. 2. Functions: Generally, cars have two fuse boxes. One is responsible for the safety of external electrical devices, such as ECU, windshield washer fluid, car lights, horn, ABS, etc., mainly ensuring circuit safety, and is located in the engine compartment. The other ensures the normal operation of internal electrical devices, such as the cigarette lighter, window lift, power seats, and airbags, and is located on the left side of the steering wheel. 3. How to replace: Before replacing the fuse box, prepare the necessary tools for removal. Do not pull out the fuse box directly with your hands. The fuse box is usually fixed with clips. Use tweezers to remove the fuse and replace it with a new one. When washing the engine compartment, since the fuse box is not completely sealed, do not rinse it directly with water, as this may cause a short circuit in the fuse and lead to the failure of the entire car's electrical system. Instead, use a damp cloth to wipe it clean.
Was this review help?
4
5
Share
More Forum Discussions

What brand is Nexen tires?

Tire Nexen is the Nexen brand, a South Korean tire brand originally named Wooseong. Nexen tires utilize optimal tread patterns and carcass contour designs to minimize rolling resistance and reduce energy loss in the tread and sidewalls, thereby achieving excellent low fuel consumption performance. Nexen's passenger car tires are currently divided into three main grades: the high-end N series, the mid-range CP series, and the entry-level SB series. Among them, the premium product N1000 has already commenced production at a factory built in Qingdao, with its design orientation focusing on high durability and superior handling traction, primarily catering to higher-end vehicle models. The tire diameter sizes for these products range between 16 inches and 20 inches.
15
4
Share

What is the displacement of the Toyota 86?

The displacement of the Toyota 86 is 2.0 liters, utilizing a naturally aspirated form, with a maximum horsepower of 200 hp, a maximum power of 147 kW, and a maximum torque of 205 Nm. Engines within this displacement range offer a balanced performance in terms of power and fuel economy. The dimensions of the Toyota 86 are 4240mm in length, 1775mm in width, and 1285mm in height, with a wheelbase of 2570mm. The Toyota 86 primarily features modifications to the concept version's front bumper, headlights, and taillights, with no significant changes to the overall body lines. The body design incorporates sharp angles and blade-shaped fold lines, elements commonly found in TOYOTA sports models.
3
0
Share

How Often Should Car Clutch Plates Be Replaced?

Car clutch plates should generally be replaced every 100,000 kilometers, though the actual replacement interval may vary depending on individual driving habits. The clutch plate is located between the engine and the transmission, serving to transfer the engine's power to the transmission or to cut off the power transmission. Correct ways to use the clutch: 1. When driving, avoid keeping your left foot on the clutch pedal continuously, as this can lead to wear on the release bearing and may cause the clutch plate to slip; 2. When using the half-clutch technique, pay attention to controlling the duration and ensure proper coordination between the clutch and accelerator.
12
0
Share

What does the ECON button mean on a Beijing Hyundai car?

ECON is the abbreviation for the low-carbon and environmentally friendly driving mode. This button can turn the energy-saving mode on or off. Modern cars generally offer three driving modes to choose from: Eco mode, Comfort mode, and Sport mode. Below is information about these three modes: Eco mode: When the car is in this mode, fuel consumption is relatively low. The throttle pedal sensitivity decreases, and the transmission shifts up more aggressively. Comfort mode: This mode is considered a normal operating mode for the car. In this mode, the throttle pedal response is more sensitive than in Eco mode. Sport mode: Sport mode can be used during aggressive driving. When Sport mode is activated, the throttle pedal response becomes very sensitive, and the transmission delays shifting. The transmission will only upshift when the engine speed reaches the redline. After switching to Sport mode, the engine speed will remain around 3,000 RPM, ensuring better power response during acceleration. When the car enters ECON mode, it can achieve reduced fuel consumption and energy savings, but the car's power will weaken. ECON can be understood as the abbreviation for "economy." In most cases, it is recommended to keep ECON mode on. It should only be turned off when high torque output is needed (e.g., climbing a hill) or when the car is traveling at very high speeds. Pressing the ECON button activates the low-carbon and environmentally friendly driving mode. The ECU, engine, and transmission then intelligently execute the driver's intentions in the most fuel-efficient manner, achieving optimal fuel economy through rapid upshifts and smooth acceleration. When the driver presses the throttle pedal deeply, the ECON system effectively controls the opening and closing of the intake valves to ensure smooth engine operation and energy savings. Although the ECON mode is simple and effective, it cannot operate under certain conditions: When the vehicle speed exceeds 120 km/h, priority is given to speed, and the energy-saving mode automatically deactivates. This means that if the speed exceeds the economical range (typically between 60-90 km/h), the ECON mode will not save fuel. The key to the ECON mode is the use of computer-controlled independent operation while the car is moving, making it effective. Therefore, it does not work during idle parking or when the car is in N, P, or manual mode. When overcoming significant resistance or requiring high torque output (e.g., climbing a hill), the ECU prioritizes ensuring sufficient power to drive the car, and the ECON mode will not function in such cases.
14
0
Share

What kind of engine oil should be used for Borgward BX5?

Borgward BX5 requires fully synthetic engine oil. The functions of engine oil are: 1. Reducing friction and high temperature; 2. Cooling and temperature reduction; 3. Cleaning; 4. Shock absorption; 5. Rust and corrosion prevention. The Borgward BX5 is a compact SUV with body dimensions of 4490mm in length, 1877mm in width, and 1675mm in height, with a wheelbase of 2685mm and a fuel tank capacity of 60 liters. The Borgward BX5 is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW at 5500rpm, and a maximum torque of 250Nm between 1750 to 4000rpm.
20
2
Share

What are the symptoms of a damaged charcoal canister solenoid valve?

Symptoms of a damaged charcoal canister solenoid valve include: 1. Abnormal noises during vehicle operation; 2. Strong fuel odor inside the vehicle; 3. Unstable engine idle; 4. Difficulty starting the engine. The charcoal canister solenoid valve is a device installed in cars or motorcycles to reduce air pollution caused by fuel evaporation emissions while improving fuel efficiency. The working principle of the charcoal canister solenoid valve is: when the engine is off, the vehicle's charcoal canister begins absorbing fuel vapors evaporating from the fuel tank, trapping them in the micropores of the activated carbon inside the canister to prevent the vapors from being released into the atmosphere. When the engine starts, the adsorbed fuel vapors in the canister are delivered to the engine as fuel.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.