···
Log in / Register

Where is the fuse box located in the MG ZS?

4 Answers
Saul
07/29/25 9:08pm

The location of the fuse box in the MG ZS: The MG ZS has two fuse boxes, one inside the engine compartment, which is the main fuse box of the vehicle, and another on the left side of the main driver's center console inside the car, which can be seen by opening the decorative panel. Relevant information is introduced as follows: 1. Fuse: A fuse, also known as a current fuse, is defined as a fuse-link by the IEC127 standard. Its main function is overload protection. 2. Fuse box: Refers to the box (also known as a fuse holder) that installs fuses, making it convenient to install fuses. Some have performance characteristics such as waterproofing, fire resistance, and high-temperature resistance (depending on the material and shape).

Was this review help?
10
3
Share
LunaAnn
08/15/25 7:20pm

The fuse box locations on the MG ZS are quite straightforward. Having driven this car for over a year, I often tinker with minor issues myself. There are mainly two locations: one is the fuse box in the cabin, located under the dashboard on the left side of the driver's seat. If you look down in the footwell area, you'll see a plastic cover – pry it open to access the fuse slots. The other is in the engine compartment, usually near the front-left side close to the battery after lifting the hood; opening a small box there reveals the fuses. I once experienced wiper failure due to a blown fuse. When replacing it, remember to turn off the ignition switch first, check the owner's manual for the exact diagram and specifications, and avoid using fuses with incorrect amperage to prevent further circuit damage. Regularly checking the fuse condition can help reduce malfunctions and make driving more worry-free.

Was this review help?
17
3
Share
Expand All
JakeDella
10/16/25 8:41am

As someone who often helps others with minor car repairs, I've seen the MG ZS fuse box many times. The one in the cabin is located at the bottom of the dashboard near the footwell area of the steering wheel, and you can easily find the cover by reaching out. The one in the engine compartment is on the left side or in the middle of the engine, sometimes requiring you to move some clutter aside to see it. Fuses play a crucial role in protecting circuits from overloads; if one blows, simply replace it with a new one, but remember to match the original vehicle's amperage rating. For safety, turn off the engine and disconnect the negative terminal before operating to avoid accidental short circuits. It's advisable to keep a set of spare fuses in the car, especially for long trips when they might come in handy in emergencies, saving you from the hassle of a midnight breakdown.

Was this review help?
1
4
Share
Expand All
OVanessa
11/30/25 2:41am

As an average car owner who recently started driving a MG ZS, I clearly remember the fuse box location. In the car, there's a small cover on the lower side of the dashboard near the driver's seat - opening it reveals the fuse box. Alternatively, you can find it in the engine compartment next to the engine. If you can't locate it, the simplest methods are to first check the manual for diagrams or ask a friend to help look. When replacing fuses, pay attention to matching the color with the correct amperage, don't pull forcefully, and handle gently. For safety, turn off the ignition before working, and if inexperienced, avoid tampering with electrical circuits.

Was this review help?
3
2
Share
Expand All
More Forum Discussions

Why is it not necessary to wait for a red light when turning right?

The reasons why it is not necessary to wait for a red light when turning right are as follows: In China, the principle of right-hand traffic applies, making the right side relatively safer when turning right. The driver is positioned on the left, facilitating observation of the traffic conditions on the left. Below are the precautions for vehicles turning right: 1. Penalties: If there is a dedicated right-turn lane, vehicles must not use other lanes to turn right. At three consecutive red lights, if a vehicle turns right from a straight lane, electronic surveillance will automatically capture the violation, which will be deemed as running a red light, resulting in point deductions and fines. 2. Reminder: Drivers must pay attention to road signs and not rely solely on their memory, especially when driving in unfamiliar areas. Some places may prohibit right turns or require stopping at red lights to alleviate traffic pressure and achieve vehicle diversion, but clear reminders will be provided. 3. Yielding to pedestrians: Drivers must yield to pedestrians and be aware of their surroundings. Pedestrians and electric vehicles may appear when turning right, so vehicles should slow down and wait for pedestrians to pass before proceeding.
16
3
Share

What is the mileage requirement for C1 Subject 3?

C1 Subject 3 requires a test mileage of no less than 3 kilometers. C1 driver's license examination passing standards: Traffic regulations and related knowledge (Subject 1) - Written test, full score is 100, passing score is 90 or above. Field driving (Subject 2) - On-site, actual vehicle. Minimum requirement is 80 points, below 80 is failing. Road driving (Subject 3) - Highway or simulated field, actual vehicle. Full score is 100, must achieve 90 or above to pass. Safe and civilized driving knowledge - Written test, questions mainly in the form of cases, pictures, animations, etc., question types include true/false, single choice, and multiple choice, totaling 50 questions, full score is 100, passing score is 90. Age requirement for C1: The minimum age limit for a C1 driver's license is 18 years old, with no upper age limit. However, applicants aged 70 or above must pass tests on memory, judgment ability, and reaction ability.
12
4
Share

How Long Does It Take to Get the Vehicle License After New Car Registration?

Normally, the vehicle license can be obtained on the same day after the new car registration is completed. The process of making the vehicle license: When registering a new car, the vehicle management department will immediately produce the vehicle license for the owner using motor vehicle license plate image synthesis technology. It is understood that previously, the vehicle license could only be generated after the motor vehicle license plate was made. However, the new system employs motor vehicle license plate image synthesis technology, utilizing advanced three-dimensional image processing methods. This allows the vehicle license photo to be printed in advance even before the owner receives the license plate, reducing the number of trips and waiting time for the owner and improving work efficiency. Definition of the vehicle license: The motor vehicle license is the legal document that permits a motor vehicle to drive on roads within China. The license consists of three parts: the license holder, the main page, and the supplementary page. The front of the main page contains the endorsed certificate core, while the back features the vehicle photo, which is sealed in a plastic cover. The supplementary page is the endorsed certificate core.
20
4
Share

Where is the Santa Fe jack located?

The Santa Fe jack is located at the metal seam under the car door. Introduction to the jack: A jack is a lightweight lifting device that uses a rigid lifting component as its working mechanism to lift heavy objects within a small stroke range via a top support or bottom claw. Jacks are primarily used in factories, mines, and transportation sectors for vehicle repairs and other lifting or supporting tasks. They feature a compact, sturdy structure and reliable operation, making them easy to carry and operate by a single person. Types of jacks: Commonly used jacks include screw jacks and hydraulic jacks. Screw jacks do not have self-locking threads and are equipped with brakes. Releasing the brake allows the load to descend quickly, reducing return time, but this type of jack has a more complex structure. Screw jacks can support heavy loads for extended periods, with maximum lifting capacities reaching up to 100 tons, making them widely applicable. When fitted with a horizontal screw at the bottom, they can also enable small-distance lateral movement of the load. Hydraulic jacks serve as an intermediate medium in hydraulic transmission systems, transferring and converting energy. They also provide lubrication, corrosion protection, cooling, and cleaning for components within the hydraulic system.
13
1
Share

What is the model number of the Jaguar XJL transmission fluid?

Jaguar transmission fluid model is JDE26444. Function of transmission fluid: Transmission fluid is an oil product used to keep the gear system clean, providing lubrication to extend the life of the transmission components. It offers effective lubrication even at low temperatures and reduces oil loss under harsh operating conditions. Types of transmission fluid: Depending on the transmission structure, transmission fluid is categorized into automatic transmission fluid (ATF) and manual transmission fluid. ATF is specifically designed for automatic transmissions, serving as the hydraulic fluid for the torque converter, the lubricant for the planetary gear set, and the hydraulic oil for the shifting mechanism. Under normal driving conditions, ATF should be replaced every 120,000 kilometers, or every 60,000 kilometers under severe driving conditions. Manual transmission fluid, commonly referred to as gear oil, is classified by the American Petroleum Institute (API) into five grades (GL-1 to GL-5) based on quality. GL-1 to GL-3 are for lower performance requirements, used for lubricating standard and bevel gears, as well as gears in transmissions and steering systems. Manual transmission gear oil should generally be replaced every 2 years or 60,000 kilometers under normal driving conditions.
18
5
Share

How Many Meters of Reversing at Traffic Lights Constitutes a Violation?

Any act of reversing is considered a traffic violation. Reversing at a traffic light intersection will result in a 3-point penalty. Relevant details are as follows: Introduction to situations where reversing is not allowed: According to the Road Traffic Safety Law, reversing is prohibited in areas such as railway crossings, intersections, one-way roads, sharp turns, highway bridges, tunnel construction zones, steep slopes, etc. Violators may be penalized. Criteria for determining reversing at traffic light intersections: If a vehicle has just crossed the stop line during a red light but immediately stops, traffic authorities will not impose a penalty. However, if there is noticeable movement after crossing the line, the driver will be penalized. The three photos taken by traffic cameras for running a red light are: the vehicle crossing the stop line, followed by two more showing the vehicle moving to the middle of the intersection and reaching the opposite side. Handling conflicts between traffic signals and police gestures: When there is a conflict between traffic signals and police gestures, drivers must follow the on-site instructions of the traffic police. If a driver "runs a red light" due to police instructions, they can obtain a diversion certificate from the local traffic police station to avoid penalties.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.