Where is the fuel tank cap switch on the Geely Haoyue?

1 Answers
BeauRose
07/29/25 7:35pm
The fuel tank cap switch is located on the left rear foot of the driver's seat floor mat. Lift the switch upward to open the fuel tank cap for refueling. Below are the relevant details about the Geely Haoyue: 1. Engine: The Geely Haoyue is equipped with a 1.8-liter turbocharged engine across all models. This 1.8-liter turbocharged engine delivers a maximum power of 135 kW and a maximum torque of 300 Nm. The engine reaches its peak power at 5,500 rpm and its maximum torque between 1,750 and 4,000 rpm. It features direct fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block. Although the cast iron block is heavier, it can withstand higher temperatures and pressures, offering better reliability and durability. 2. Configuration: The engine is paired with a 7-speed dual-clutch transmission, which provides quick gear shifts and high transmission efficiency. The dual-clutch transmission is an automatic transmission developed from manual transmission technology. The front suspension of the Geely Haoyue uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension. The torsion beam rear suspension helps maximize rear passenger space and trunk capacity. Additionally, using a torsion beam suspension reduces costs, thereby lowering the vehicle's price. The torsion beam suspension has a simple structure, compact size, and occupies minimal space.
Was this review help?
3
4
Share
More Forum Discussions

Does a newly purchased battery need to be charged?

Whether a newly purchased battery needs to be charged depends on different situations: If the battery's production date is within half a month and it hasn't been used, it can be used directly without charging; If the battery's production date is relatively old or it has been used, it can be charged before use. Precautions for battery charging are: 1. The battery should be charged directly without removing it, otherwise data may be lost; 2. Avoid water entering the battery during charging. The functions of the battery are: 1. When starting the engine, the battery supplies power to the starting system, ignition system, and electronic fuel injection system; 2. When the engine stops running or is at low idle speed, it powers the car's electrical equipment; 3. When the generator's output is insufficient, it can assist in powering the electrical equipment; 4. It mitigates impact voltage in the electrical system and protects the car's electronic equipment; 5. It can store excess electricity generated by the generator.
19
4
Share

How to turn on the front fog lights of a Ford Focus?

The method to turn on the front fog lights of a Ford Focus is: 1. Press the vehicle's one-touch start button to power on the vehicle; 2. Locate the vehicle light control button on the lower left side of the steering wheel; 3. Rotate the central knob to turn on the vehicle lighting system; 4. Press the front fog light button to activate the front fog lights. Functions of fog lights: 1. Front fog lights are used to improve illumination when road conditions ahead are unclear and to alert oncoming drivers; 2. Rear fog lights help vehicles behind to spot the car in low visibility conditions. Taking the 2021 Ford Focus as an example, its body structure is a four-door, five-seat sedan with dimensions of 4674mm in length, 1810mm in width, and 1468mm in height, a wheelbase of 2705mm, a fuel tank capacity of 53 liters, a trunk capacity of 511 liters, and a curb weight of 1242kg.
10
5
Share

Why is the engine preheating light always on?

If the engine preheating light remains illuminated, it indicates a fault in the engine, such as sensor failure, engine wiring issues, or engine control system malfunction. It is necessary to promptly inspect and repair at a maintenance facility to resolve the issue. Engine maintenance methods include: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning the radiator scale; 4. Periodically removing engine carbon deposits; 5. Regularly replacing the vehicle's three filters; 6. Maintaining a reasonable engine speed. Precautions for engine preheating: 1. Both electronic fuel injection diesel engines and direct injection diesel engines require preheating; 2. The engine preheating time is limited; 3. Avoid starting the engine too frequently in a cold state; 4. During engine preheating, check for any abnormal phenomena in the engine's related components and operation.
16
1
Share

Does a Car Exhaust Pipe Have a Drain Hole?

Car exhaust pipes do have drain holes, as water accumulation in the exhaust pipe can easily cause oxidation of the pipe and muffler, leading to corrosion. The maintenance methods for exhaust pipes include: 1. Preventing water from entering the interior of the exhaust pipe; 2. Applying rust-proof oil inside the exhaust pipe; 3. Regularly inspecting the condition of the exhaust pipe. The functions of an exhaust pipe are: 1. Reducing environmental pollution: The exhaust pipe contains a purification device, with a three-way catalytic converter that effectively cleans harmful gases from the exhaust; 2. Ventilation and exhaust: The car exhaust pipe operates in a cycle of intake, compression, power, and exhaust—without it, the car would not function; 3. Noise reduction: The exhaust pipe is equipped with a muffler, which reduces car noise by using multiple channels to divert airflow, causing friction and collisions between the diverted flows to gradually decrease airflow speed, thereby lowering noise through repeated cycles.
1
4
Share

What is the body length of the Buick GL8?

The body length of the Buick GL8 is 5238mm. It is an MPV model under the Buick brand, available in seven-seat, six-seat, and four-seat versions. Taking the 2020 Buick GL8 as an example, its body dimensions are: length 5219mm, width 1878mm, height 1805mm, with a wheelbase of 3088mm and a fuel tank capacity of 71 liters. The 2020 Buick GL8 features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 237PS, maximum power of 174kW, and maximum torque of 350Nm, paired with a 9-speed automatic transmission.
2
3
Share

What does the scan button in the car mean?

The scan button in the car is a scanning button, which refers to stopping after searching for radio stations. The radio is a voice entertainment configuration used in cars and a common configuration of the in-car audio and video entertainment system. The method to turn it off is: open the radio on the central control screen and press the pause button. The buttons and functions of the car radio are divided into: 1. Power button: press to turn on/off, rotate to adjust volume; 2. TPK button: MP3 track selection, browse playback tracks; 3. AST button: long press this button to automatically store radio stations; 4. RPT button: repeat playback; 5. INT button: browse playback; 6. ROM button: random playback; 7. SET button: sound effect adjustment.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.