Where is the fuel tank cap switch for the BMW 5 Series?

How to Reset the Maintenance Reminder for the Buick LaCrosse?

Buick LaCrosse maintenance reset method is as follows: 1. Turn the ignition switch to the "IGNITION/RUN/START" mode (i.e., only illuminate the instrument panel without starting the engine). 2. Use the Driver Information Center control buttons on the right side of the steering wheel to bring up the oil life menu interface on the instrument cluster display. When the remaining oil life is low, the message "Change Engine Oil Soon" will appear on the display. 3. Press the ">" button on the steering wheel, and the display will show "Reset." Then press the "√" (OK/Confirm) button to reset the oil life to 100%. 4. Complete the reset.

20

4

Share

How to adjust the time on an older model GL8?

Here are the specific steps to adjust the time on an older model GL8: 1. The older GL8 has a time reset button on the right side, located as a small protruding knob on the dashboard. Press it briefly to switch between time and mileage display. When the time is displayed, press and hold for 3 seconds. 2. Wait until the hour display starts flashing, then press briefly to adjust the hour. 3. Press and hold for 3 seconds again until the minute display flashes, then press briefly to adjust the minutes. 4. Press and hold for 3 seconds once more or do nothing to return to normal time display. 5. The clock on the car dashboard is only an auxiliary function and isn't highly precise. You can adjust it whenever there's a time discrepancy.

19

3

Share

What are the physical examination requirements for a C1 driver's license?

The physical examination requirements for a C1 driver's license are as follows: 1. Height: Applicants for large buses, tractors, city buses, large trucks, and trolleybuses must be at least 155 cm tall. Applicants for medium-sized buses must be at least 150 cm tall. 2. Vision: Applicants for large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or trams must have uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart. Applicants for other vehicle types must have uncorrected or corrected visual acuity of at least 4.9 on the logarithmic visual acuity chart. 3. Color vision: No red-green color blindness. 4. Hearing: Able to distinguish the direction of sound sources with each ear at a distance of 50 cm from a tuning fork.

3

4

Share

What does the BATT indicator on the Honda XR-V dashboard mean?

The BATT indicator on the Honda XR-V dashboard stands for battery. When the BATT light flashes, it indicates that the remote key battery is low. Below are the specific steps to replace the battery in the Honda XR-V key: 1. First, locate the switch on the back of the key fob and pull out the top part to remove the internal metal mechanical key, revealing a small groove. 2. Use a flathead screwdriver or another tool to pry open the key fob cover along the groove. Once a gap appears, you can manually open it. 3. After opening the key fob cover, remove the old battery and replace it with a new one, paying attention to the battery's polarity. 4. Reattach the key fob cover and reinsert the mechanical key.

6

4

Share

Why is there no heating in the car?

There is no heating in the car because there is a problem with the car's cooling system or exhaust fan. The following is how the heating and cooling system works: 1. Cold air: Cold air is formed by compressing the refrigerant to liquefy it and then vaporize it, absorbing a large amount of heat from the air; when the cold air is turned on, the compressor pulley drives the compressor to work, increasing the engine load and consuming a certain amount of fuel. 2. Warm air: Warm air comes from the heat generated by the engine during operation: when the engine's cooling system dissipates heat from the engine, the fan sends the dissipated heat into the car to form warm air; when the warm air is not in use, the fan stops, the warm air outlet closes, and the dissipated heat is completely released into the atmosphere.

17

0

Share

What is the difference between National 5 and National 6 when buying a car?

The differences between National 5 and National 6 when buying a car are as follows: 1. Price difference: National 6 cars are generally more expensive than National 5 cars, mainly because automakers need to comply with policy implementation by submitting applications to relevant departments and conducting various pollution tests, which increases costs and consequently raises the vehicle price. Additionally, National 6 vehicles are equipped with more configurations compared to National 5 to reduce environmental pollution. 2. Access restrictions: With the implementation of the National 6 policy, vehicles that do not meet the emission standards will face certain driving restrictions. Typically, National 5 or below vehicles may be directly prohibited from road use due to non-compliance with emission requirements. Therefore, many National 5 vehicle owners switch to National 6 cars to ensure normal road usage.

16

5

Share

Where is the fuel tank cap switch for the BMW 5 Series?

How to Reset the Maintenance Reminder for the Buick LaCrosse?

How to adjust the time on an older model GL8?

What are the physical examination requirements for a C1 driver's license?

What does the BATT indicator on the Honda XR-V dashboard mean?

Why is there no heating in the car?

What is the difference between National 5 and National 6 when buying a car?

How to Identify China 5 and China 6 Symbols?

What does 91h on a tire indicate?

Why is Wheel Balancing Necessary?

What is the load capacity of the Wuling Rongguang Mini Truck?