Where is the fuel tank cap button of the Buick Excelle?

Should You Use the Recirculation Mode in Your Car During Summer?

Using the recirculation mode with the air conditioning in summer can quickly cool down the car interior and block harmful gases from outside. Usage of Recirculation and Fresh Air Modes: Both modes should be used, with the recirculation mode being used far more frequently than the fresh air mode. However, the timing and duration of switching between these modes should be determined based on the air quality inside and outside the car. In summer, relying solely on the recirculation mode for the car's air conditioning is not advisable. Although recirculation maximizes cooling efficiency, prolonged use or when there are many passengers can lead to stale air inside the car, which is harmful to health. Therefore, it's important to periodically switch to the fresh air mode or open the windows for ventilation. Functions of Recirculation and Fresh Air Modes: It is recommended to alternate between recirculation and fresh air modes while driving. For cooling, starting with the recirculation mode provides faster results. Once the temperature drops, switch to the fresh air mode to maintain airflow. The same principle applies when heating. You must choose either recirculation or fresh air mode; both cannot be turned off simultaneously, similar to how you can either open or close a window. The choice between recirculation and fresh air modes should be based on road conditions and the interior environment of the car.

1

Share

How Long Should a Car Rest After Driving in Summer?

In summer, it is recommended to let the car rest after running for about 4 hours or 250 kilometers. Vehicle Cooling System: The vehicle's cooling relies entirely on the cooling system. When the engine temperature is high, a major circulation cycle is activated. The coolant dissipates heat through the radiator and then flows back into the engine to cool it down. Although high-speed driving generates more heat due to higher engine RPM, increasing the cooling system's workload, the increased airflow through the radiator enhances the coolant's cooling efficiency. In some cases, even the high-speed fan may not need to operate to maintain optimal cooling conditions. This means the heat produced by the engine can be entirely dissipated by the cooling system, preventing the engine from overheating. This can also be observed on the temperature gauge; no matter how long you drive at high speeds, the water temperature does not rise. As long as the water temperature remains normal, it indicates the engine temperature is also within safe limits, allowing for extended driving without issues. Airflow at the Radiator: The airflow around the radiator is substantial, ensuring effective heat dissipation. However, the cooling system operates under continuous major circulation. If there are minor issues with the water pump or excessive scale buildup in the coolant passages, it may impede the smooth flow of coolant. While low-speed driving may not pose cooling problems, high-speed driving with increased heat generation could lead to issues, causing the water temperature to rise.

17

5

Share

What is the S3 car?

Audi S3 is an upgraded and modified version based on the AODA3-Limousine. As a compact vehicle, the Audi S3 is known as a "hot hatch" due to its outstanding performance. Vehicles described as hot hatches generally have the following characteristics: a compact body, agile handling, powerful performance, lightweight construction, a sturdy frame, and excellent safety. Relevant information about Audi is as follows: 1. Introduction: Audi, a German luxury car brand, is symbolized by four interlinked rings. It is now a subsidiary of Volkswagen Group, headquartered in Ingolstadt, Germany, with branches in many countries including China. 2. Logo meaning: Each ring represents a company. The four rings are of the same size, interlinked side by side, symbolizing the equal status and unbreakable unity of the four companies.

14

0

Share

What is a regular driver's license?

Regular driver's license refers to a C2 license. Below is an introduction to the classification of driver's licenses: 1. A1 license: Permitted vehicle types include large passenger vehicles. 2. A2 license: Permitted vehicle types include tractors, heavy and medium-sized full trailers, and semi-trailer combinations. 3. A3 license: Permitted vehicle types include city buses with a capacity of 10 or more passengers. 4. B1 license: Permitted vehicle types include heavy passenger vehicles. 5. B2 license: Permitted vehicle types include heavy and medium-duty trucks, etc. 6. C1 license: Permitted vehicle types include small and mini passenger vehicles, etc.

12

3

Share

Are all Cherokee models imported?

Not all Cherokee models are imported. As of November 2019, all Cherokee models available in the market are produced by GAC FCA Jeep, which are joint-venture vehicles, not imported ones. Regarding the specific models of Cherokee currently on sale: the 2019 2.0L 2WD Premium Edition (China VI) has a maximum horsepower of 148; the 2019 2.0T 2WD Smart Edition (China VI) has a maximum horsepower of 234; the 2019 2.0T 4WD Exclusive Edition (China VI) has a maximum horsepower of 265; the 2019 2.0T 4WD Adventure Edition (China VI) has a maximum horsepower of 265; the 2019 2.0T 4WD All-round Edition (China VI) has a maximum horsepower of 265; and the 2019 2.0T 4WD High-performance Flagship Edition (China VI) has a maximum horsepower of 265.

20

1

Share

How Do Car Tires Work?

Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. They are typically installed on metal rims to support the vehicle body, absorb external shocks, ensure contact with the road surface, and maintain driving performance. Below is an introduction to the functions of car tires: 1. Support: Bear the full weight of the vehicle, withstand the load, and transmit forces and moments in other directions. 2. Transmission: Transfer traction and braking torque to ensure good adhesion between the wheels and the road, improving the vehicle's power, braking, and off-road capabilities. They also work with the suspension to mitigate impacts during driving and dampen resulting vibrations. 3. Protection: Prevent severe vibrations and premature damage to vehicle components, adapt to high-speed performance, reduce driving noise, and ensure safety, handling stability, comfort, and fuel efficiency.

15

2

Share

Where is the fuel tank cap button of the Buick Excelle?

Should You Use the Recirculation Mode in Your Car During Summer?

How Long Should a Car Rest After Driving in Summer?

What is the S3 car?

What is a regular driver's license?

Are all Cherokee models imported?

How Do Car Tires Work?

Is it safe to drive with a tire pressure of 2.2 bar in summer?

How to Check if You Have Any Vehicles Registered Under Your Name?

Is the Cherokee compliant with China 5 or China 6 emission standards?

Is Finger Bending Allowed for Driver's License Physical Examination?