Where is the fuel pump relay located in the Qoros 3?

1 Answers
StJayce
07/28/25 4:42pm
The fuel pump relay of the Qoros 3 is located under the car's hood, inside the engine compartment, between the left side of the car's transmission and the car battery. To find the fuel pump relay, you need to first open the engine hood. The Qoros 3 is a compact car equipped with an engine that delivers a maximum power of 115 kW and a maximum torque of 230 Nm. The car is configured with a 1.5T 156 horsepower L4 engine and a CVT continuously variable transmission. It has a length of 4627 mm, a width of 1839 mm, and a height of 1445 mm. The top speed can reach 205 km/h, and the body structure is a 4-door, 5-seater sedan.
Was this review help?
7
3
Share
More Forum Discussions

What is the difference between Rolls-Royce Phantom and Wraith?

The differences between Rolls-Royce Phantom and Wraith are: Different maximum engine horsepower: The Rolls-Royce Phantom has a maximum engine horsepower of 460 hp; the Wraith has a maximum engine horsepower of 632 hp. Different maximum engine torque: The Rolls-Royce Phantom has a maximum engine torque of 900 Nm; the Wraith has a maximum engine torque of 820 Nm. Both the Rolls-Royce Phantom and Wraith have a top speed of 250 km/h, front-engine front-wheel drive, front suspension using double-wishbone independent suspension, rear suspension using multi-link independent suspension, equipped with ABS anti-lock braking system, brake assist, tire pressure monitoring system, electronic stability control, front seatbelt reminder, and lane departure warning system.
11
3
Share

Which has higher fuel consumption, CS55 or CS75?

Manual transmission models of both vehicles have similar fuel consumption, but the CS75 shows slightly higher fuel consumption. The CS55 and CS75 employ different fuel injection technologies: the CS75 uses direct injection technology, providing more power at low RPMs, while the CS55 utilizes multi-point injection technology, though its overall vehicle weight is lighter. Methods to reduce fuel consumption: Properly adjust tire inflation pressure: Maintaining correct tire pressure reduces rolling resistance and lowers fuel consumption. Additionally, slightly overinflating tires by +0.2bar can also save fuel. Moderate use of auxiliary electrical devices: Using certain electrical devices significantly increases fuel consumption, such as the air conditioning system's cooling function. Turn off seat heaters once the desired warmth is achieved. Similarly, deactivate rear window defrosters when there's no fog or ice. Correct gear usage: Match gears to appropriate speeds—avoid high-speed low-gear or low-speed high-gear driving. Shift gears promptly according to speed, and never drive at high speeds in low gears or vice versa.
10
4
Share

What is the fuel consumption of the Chery 3x?

The Tiggo 3x has a fuel consumption of around 8 liters, but actual consumption may vary depending on individual driving skills and habits. Factors affecting fuel consumption are as follows: Bumpy roads increase fuel consumption: Driving on congested or uneven roads in low gear for extended periods will inevitably increase fuel consumption; Using the trunk as storage increases fuel consumption: Loading the trunk with unnecessary items increases the vehicle's weight. It's important to note that vehicle weight is directly proportional to fuel consumption. A 10% reduction in weight can lead to a corresponding percentage decrease in fuel consumption; Incorrect driving habits can double or triple fuel consumption: Improper driving habits have the most significant impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues.
1
3
Share

How to use the Auman GTL fuel-saving switch?

E gear is the economy mode, used when the vehicle is empty or carrying light loads. B gear is the standard mode, used when the vehicle is half-loaded or carrying medium loads. P gear is the power mode, used when the vehicle is fully loaded or climbing slopes. Relevant information about the fuel-saving switch is as follows: Introduction: The fuel-saving switch, also commonly referred to as the multi-state switch or intelligent driving control switch, often uses EBP, LMH, knob 123, or knob 1234 switches. Function: Its main purpose is to help the vehicle save fuel more effectively. Trucks do not always operate under full load; some of the time they run empty.
9
0
Share

What is the fuel tank capacity of the Tiguan?

The fuel tank capacity of the Tiguan is 63 liters, and it requires unleaded gasoline with an octane rating of 92 or higher. Taking the new Volkswagen Tiguan as an example: Dimensions: It is a compact SUV with the following body dimensions: length 4506mm, width 1809mm, height 1685mm, wheelbase 2684mm, and a curb weight of 1600kg. Powertrain: The new Volkswagen Tiguan is equipped with a 1.8T direct-injection 4-cylinder turbocharged engine, delivering a maximum horsepower of 160PS, maximum torque of 250Nm, and maximum power of 118kW. It is paired with a 6-speed automatic transmission.
8
0
Share

What are the differences between the Buick LaCrosse and the Buick Regal?

The differences between the Regal and LaCrosse are as follows: Different maximum engine torque: The Regal's engine has a maximum torque of 350 Nm; the LaCrosse's engine has a maximum torque of 250 Nm. Different maximum engine horsepower: The Regal's engine has a maximum horsepower of 237 hp; the LaCrosse's engine has a maximum horsepower of 169 hp. Different dimensions: The Regal's length, width, and height are 4913mm, 1863mm, and 1462mm respectively, with a wheelbase of 2829mm; the LaCrosse's length, width, and height are 5026mm, 1866mm, and 1459mm respectively, with a wheelbase of 2905mm.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.