···
Log in / Register

Where is the Ford AC filter located?

4 Answers
AlanaRose
07/29/25 7:15pm

Ford's AC filter is located beneath the glove compartment. Here are the steps to remove the AC filter: 1. Remove the passenger-side floor mat. 2. You will see a gray foam panel with two yellow plastic clips. Pinch the yellow caps and pull them straight out. 3. After removing the yellow caps, take off the foam panel. 4. On the left side, you'll find a black component which is the filter assembly. Pinch the two yellow areas on either side to remove the filter cover. 5. You will then see the gray-and-black filter. 6. Grasp the exposed end of the filter and pull it out, being careful not to disconnect the two obstructive plugs. Disconnecting them will reset the vehicle's fuel consumption data. 7. Installation follows the reverse order of the removal steps. When installing, ensure the filter is oriented correctly with the arrow pointing from the front to the rear of the vehicle.

Was this review help?
5
4
Share
McAustin
08/14/25 1:44pm

I'm a car DIY enthusiast who often maintains my Ford vehicles myself. The location of the Ford cabin air filter is generally behind the glove compartment on the passenger side, but it depends on the model. For example, in a Focus or Kuga, you'll need to open the glove box first and look for its retaining clips or screws—just press or unscrew them to remove the box, revealing a rectangular cover. Open it, and you'll find the filter housing. When replacing, remember the filter has an arrow indicating airflow direction—don't install it backward. DIY replacement saves a lot of money; just buy a compatible filter for a few dozen bucks, and you can avoid long queues at repair shops. It's recommended to replace it every 15,000 km or once a year for better airflow, no odors in the cabin, and improved warmth when using the heater in winter. I replaced mine last year, and now the cabin feels much fresher with noticeably less dust. The design keeps it hidden and dust-proof, but don’t forget to clean the glove box regularly to prevent clutter buildup that could hinder replacement.

Was this review help?
12
1
Share
Expand All
LeJosie
10/15/25 4:13am

As a mom who cares about family health, I'm very concerned about the location of the cabin air filter since my kids often play in the car. In Ford models, the cabin air filter is usually hidden inside or behind the glove compartment – you can feel the cover panel position as soon as you open it. For vehicles like the Edge, simply removing the lower panel reveals the filter. While conveniently located, this spot makes it easy to overlook. Dust accumulation affects air filtration, and increased bacteria can harm children's respiratory health, potentially causing coughs. I recommend seasonal inspections – visit a professional if clogged. DIY replacement is possible but handle with care to avoid damaging parts. Regular replacement saves money while improving cabin comfort; fresh air makes long drives more pleasant, especially enhancing defogging during rainy days. Neglecting it leads to foggy windows and uneven heating/cooling. Paying attention to this small detail ensures safer family trips.

Was this review help?
1
0
Share
Expand All
DeNicole
11/28/25 5:05am

I've been driving a Ford for five years and have memorized the filter location—most Ford models place it behind the glove compartment. Just open the compartment, remove the divider or clips, and you'll easily spot the filter housing—that's how my Mondeo is designed, simple and user-friendly. The location is easy to access and doesn’t take up much space. Buying filters online and replacing them yourself saves both money and time. Don’t delay replacements too long, as accumulated dust reduces airflow, making summer drives uncomfortably hot. It’s best to check every 10,000 km to ensure fresh air circulation, which helps maintain driving focus.

Was this review help?
16
3
Share
Expand All
More Forum Discussions

How to Turn on the Heating Function of Baojun 510 Air Conditioner?

Baojun 510 Air Conditioner's heating method is as follows: 1. Plug in the Baojun 510 air conditioner power socket. 2. Press the "On/Off" button on the Baojun 510 air conditioner remote control. 3. Press the "Mode" option on the Baojun 510 air conditioner remote control to switch to "Heating Mode". 4. Press the "Fan Speed" option on the Baojun 510 air conditioner remote control to set the fan speed. 5. Select the "Adjust" option on the Baojun 510 air conditioner remote control to set the temperature. Note: When turning on the cooling, the air outlet should face upward; when turning on the heating, the air outlet should face downward. Prolonged use of the air conditioner will cause excessive pressure on the condenser, resulting in wear and tear on the refrigeration system. Therefore, each use of the air conditioner should not be too long. If the temperature inside the car reaches a comfortable level, the air conditioner can be turned off.
5
5
Share

How to close windows with the key for Honda URV?

To close windows with the key for Honda URV, press and hold the lock button on the key. Here is more information about Honda URV: 1. Dimensions: Honda URV is a mid-size 5-door 5-seater SUV with body dimensions of 4856mm in length, 1942mm in width, 1670mm in height, and a wheelbase of 2820mm. 2. Configuration: Honda URV is equipped with a 1.5T turbocharged engine and CVT continuously variable transmission, with a maximum power of 142 kW and a maximum torque of 243 Nm, and the drive mode is front-wheel drive. 3. Suspension: The front suspension uses MacPherson independent suspension, and the rear suspension uses multi-link independent suspension.
10
5
Share

What is the emission standard for the 2017 Excelle?

The 2017 Excelle meets the China V emission standard. Below is relevant information: 1. The launch of the Buick Excelle filled the product gap between the new Excelle and the new Regal in the Buick lineup. The Buick Excelle GT boasts excellent fuel economy, with a constant-speed fuel consumption of only 6.2L/100km at 90km/h for the 1.6T model, and even lower figures of 6.1L/100km and 5.7L/100km for the 1.8L and 1.6L manual models respectively. All models comply with the China IV emission standard. 2. Automobile emission standards regulate the permissible levels of harmful gases emitted from vehicle exhaust, including CO (carbon monoxide), HC+NOx (hydrocarbons and nitrogen oxides), and PM (particulate matter, soot). Starting from January 1, 2004, Beijing upgraded its vehicle emission standards from Euro I to Euro II, and by 2008, officially implemented the Euro III standard.
12
1
Share

Where is the handbrake located on the Buick GL8?

The electronic handbrake of the Buick GL8 is positioned on the left side near the driver's left foot. Below is more information about the electronic handbrake: 1. Working Principle: The electronic handbrake utilizes electronically controlled technology to achieve parking brake functionality. Its operation principle is identical to that of a mechanical handbrake - both rely on friction generated between the brake disc and brake pads to control parking braking, except the control mechanism has evolved from a mechanical handbrake lever to an electronic button. 2. Function: The electronic handbrake, also known as the Electronic Parking Brake (EPB) system, integrates temporary braking during driving with long-term parking braking functions, all electronically controlled to implement parking brake technology.
12
0
Share

How to reset the maintenance light on JAC Refine S2?

To reset the maintenance light on JAC Refine S2, follow these steps: 1. Turn on the ignition switch while holding down the reset button, then turn off the ignition switch. 2. Keep holding the reset button until the clock and mileage on the dashboard completely disappear, then release the button. Press and hold the reset button again while turning the ignition switch back on. 3. The maintenance light on the dashboard will start flashing. Continue holding the reset button until the light stops flashing, then release the button to complete the reset. Note: Turn the ignition switch on again or start the vehicle to check if the reset was successful.
9
3
Share

What is the maximum displacement of the GT version in the 2015 Mustang?

The maximum displacement of the GT version in the 2015 Mustang is 5.0 liters. Here are the specific details about the Mustang: 1. This version is equipped with a 5.0-liter V8 naturally aspirated engine, delivering a maximum power of 441Ps (324kW) and a peak torque of 542N·m. In terms of the transmission system, the models introduced in the domestic market are only paired with a 6-speed automatic transmission. It is worth mentioning that the rear suspension of the new car has been upgraded from the old solid axle to a multi-link independent design. 2. In terms of appearance, the new generation Mustang retains the classic American muscle car feel with features like the 'shark mouth' style front grille and three-pillar taillights. Additionally, the overall lines of the new car are noticeably more dynamic than the current model, greatly enhancing its sense of fashion. 3. For the interior, the new generation Mustang uses more leather materials and chrome decorative strips, making it significantly more luxurious and refined than the current model. Furthermore, the new car will come standard with the SYNC in-car multimedia communication and entertainment system, which supports MyFordTouch functionality and can be operated via the touchscreen on the center console, further enhancing the sense of technology.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.