···
Log in / Register

Where is the fog light switch on the Bora?

3 Answers
Mateo
07/29/25 8:22pm
The fog light switch of the Volkswagen Bora is located on the inner side of the control lever and is operated by rotation. Turn it upwards once to turn on the front fog lights, and twice to rotate to the rear fog light position, which turns on both the front and rear fog lights simultaneously. Conversely, turn it back to turn them off. Since fog lights are bright and have strong penetration, they do not produce diffuse reflection due to fog, so correct use can effectively prevent accidents. In foggy weather, front and rear fog lights are usually used together. Here is some additional information: Fog lights are divided into front fog lights and rear fog lights: 1. Front fog lights: They are usually bright yellow, and the light lines of the front fog light symbol point downward. 2. Rear fog lights: They are red, and the symbol for the rear fog light is slightly different from the front fog light. The rear fog light symbol is parallel and is generally located on the instrument control panel inside the car. 3. Activation sequence: After turning on the parking lights, you can then turn on the fog lights. Among them, the front fog lights can be turned on individually, while the rear fog lights can only be turned on together with the front fog lights and cannot be turned on separately.
Was this review help?
11
1
Share
MacLane
08/14/25 5:02pm
I've been driving my Bora for over a decade and am quite familiar with the fog light switch location - it's on the left stalk by the steering wheel. You can easily reach it - that stalk has several icons on top, just rotate to the fog light symbol to activate front or rear fog lights (rear ones usually require headlights on first). In rainy/foggy conditions, turn them on promptly to improve visibility and greatly enhance safety. But avoid using fog lights unnecessarily in clear weather or at night - their brightness can dazzle other drivers and cause accidents. Developing the habit of turning them on only when needed is wise. During regular maintenance, have the lighting system checked to ensure reliability when it matters most - I've learned this through experience. I recommend all drivers thoroughly understand their vehicle's lighting controls for safer journeys.
Was this review help?
18
5
Share
Expand All
MacRyan
10/16/25 4:05am
As a Bora owner, I was also confused about the location of the fog light switch when I first bought the car. Later, I found it on the light control stalk on the left side of the steering wheel. Simply twist the stalk to the position marked with the fog light symbol, and you can easily switch between front and rear fog lights. This feature is really useful in bad weather, such as heavy rain or thick fog—turning on the fog lights immediately improves visibility. However, it's important to remember not to use fog lights unnecessarily, as it wastes power and can disturb other drivers on the road. I once accidentally left them on and was reminded by a friend. Before driving, take a quick glance at your lights to ensure the switches are functioning properly and avoid any mishaps that could delay your trip. Overall, familiarizing yourself with this small feature can save you a lot of trouble.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

Is It Good to Fill Up the Tank Every Time?

Filling up the tank every time is not good for the car. Here are the specific hazards of overfilling the fuel tank: 1. Gasoline evaporation is unpleasant and carcinogenic: The charcoal canister is usually located near the fresh air intake for the cabin. When the tank is overfilled, the charcoal canister becomes saturated, and excessive pressure causes it to release fumes containing gasoline components into the cabin, posing health risks to passengers. 2. Damage to the charcoal canister: The charcoal canister is typically installed between the fuel tank and the engine. Since gasoline is a volatile liquid, the fuel tank often contains vapor at normal temperatures. The fuel evaporation emission control system directs these vapors into the combustion process to prevent them from escaping into the atmosphere. The activated charcoal canister plays a crucial role in this process. If the tank is overfilled, liquid gasoline instead of vapor enters the charcoal canister, causing damage. 3. Clogged vent hole: If the engine fails to start after refueling, it may be due to an overfilled tank. Once the vent hole is clogged, negative pressure builds up in the fuel tank, leading to poor fuel supply or even a complete lack of fuel delivery.
16
5
Share

Why can't the car start after jump-starting the battery?

Ensure that the connected battery voltage is normal. Additionally, make sure the power cables are thick enough and the connections are secure. If everything is confirmed to be normal, there might be issues with other parts of the vehicle. It is recommended that the owner tow the vehicle to a 4S shop for repair. Especially in winter, there are many cases where cars cannot start and require a jump-start, but some car owners are not familiar with the jump-start process. Your vehicle and the rescue vehicle that has started must remain turned off; The wiring sequence is to first connect your car's positive terminal to the rescue vehicle's positive terminal, then connect your car's negative terminal to the rescue vehicle's negative terminal; After confirming that all equipment in the car is turned off, start the rescue vehicle, then start the electric car, and let the electric car run for a while to charge after normal operation; After the vehicle is running normally, when removing the cables, remember to follow the reverse order of the wiring sequence.
11
0
Share

Where is the license plate with 'Zhe G' from?

Zhe G is the license plate code for Jinhua City, Zhejiang Province. The license plate codes for various regions in Zhejiang Province are as follows: Zhe A for Hangzhou City, Zhe B for Ningbo City, Zhe C for Wenzhou City, Zhe D for Shaoxing City, Zhe E for Huzhou City, Zhe F for Jiaxing City, Zhe G for Jinhua City, Zhe H for Quzhou City, Zhe J for Taizhou City, Zhe K for Lishui City, and Zhe L for Zhoushan City. License plates are plates attached to the front and rear of vehicles, typically made of aluminum, sheet metal, plastic, or paper, engraved with the vehicle's registration number, registration region, or other relevant information. License plates serve as a numbering and information registration system for vehicles, primarily allowing identification of the vehicle's region of registration and enabling the lookup of the vehicle's owner and registration details based on the plate.
14
4
Share

How should a new car be inspected within six years?

According to the latest regulations, new cars within six years are exempt from inspection, and the requirement for stamping on the vehicle registration certificate has been canceled. You only need to obtain an exemption inspection label. According to Article 95 of the Road Traffic Safety Law, vehicles without an inspection label, compulsory traffic insurance label, license plate, driver's license, or vehicle registration certificate can be impounded. A fine of 20-200 yuan will be imposed, and 1 point will be deducted from the driver's license. According to the 2019 vehicle inspection regulations, new cars are exempt from inspection for six years. If your car falls within the 6-year exemption range, there is another prerequisite: only vehicles meeting the following criteria can be exempt from inspection; otherwise, they must undergo on-site inspection: vehicles that have not been involved in accidents causing casualties; vehicles that have not been penalized for illegal modifications; and vehicles registered within 4 years from the date of manufacture. For vehicles that meet all the criteria, you can apply for an inspection exemption label every two years within the six-year period, specifically in the 2nd and 4th years. The exemption process is no longer as cumbersome as before, where you had to visit the vehicle management office. Now, you can apply for the inspection label anywhere using the "Traffic Management 12123" mobile app.
10
5
Share

Solutions for the Rumbling Sound in EA211 Engine?

Dada abnormal noise situation and solutions: The first type: The upper part of the engine makes a dada sound. First, ensure that the oil level, oil pressure, and water temperature are normal. Then, use a stethoscope on the exhaust side of the valve cover to determine if the sound is coming from the valve cover, and the noise frequency increases with the engine speed. This situation is caused by the failure of the hydraulic tappet, and the hydraulic tappet needs to be replaced. The second type: A dada sound is heard in the middle part of the engine. First, ensure that the oil, cylinder pressure, valves, valve rocker arms, hydraulic tappets are normal, and check if there are any fault indications in the engine. Then, use a stethoscope to determine if the abnormal noise is coming from the middle part. If the sound also increases in frequency with the engine speed, the connecting rod assembly needs to be replaced, as the noise is caused by excessive clearance between the piston pin and the small end of the connecting rod. The third type: There is a metal friction sound in the front part of the engine, especially noticeable during rapid acceleration at 2000-2500 rpm. In this case, check if the turbocharger is functioning properly. If this issue is confirmed, it is necessary to go to a repair facility for inspection.
4
2
Share

Haval H6 Hill Descent Control Malfunction and Failure to Start?

1.5-liter turbocharged engine has a maximum power of 110 kW, a maximum torque of 210 Nm, a maximum power speed of 5600 rpm, and a maximum torque speed ranging from 1800 to 4400 rpm. This engine is equipped with VVT technology and uses an aluminum alloy cylinder head and block. The 1.5-liter turbocharged engine has a maximum power of 110 kW, a maximum torque of 210 Nm, a maximum power speed of 5600 rpm, and a maximum torque speed ranging from 1800 to 4400 rpm. This engine is equipped with VVT technology and uses an aluminum alloy cylinder head and block. This engine is paired with either a 6-speed manual transmission or a 7-speed dual-clutch transmission. The 2.0-liter turbocharged engine has a maximum power of 145 kW, a maximum torque of 345 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed ranging from 2000 to 3000 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and a cast iron block. This engine is paired with a 7-speed dual-clutch transmission. Dual-clutch transmissions offer fast gear shifts and high transmission efficiency, making them well-suited for use with small-displacement turbocharged engines. The production cost of dual-clutch transmissions is also relatively low, which is why many automakers prefer to use this type of transmission.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.