Where is the Focus windshield washer reservoir located?

1 Answers
LeJameson
07/25/25 3:26pm
The Focus windshield washer reservoir is located on the side of the engine, identifiable by its blue cap. Below is an extended introduction: 1. Filling inlet: The Focus windshield washer fluid is added through the filling port on the right side of the engine compartment. 2. Filling quantity: The Focus windshield washer fluid capacity is approximately 2.5 liters. When filling, be careful not to overfill to prevent overflow. 3. Precautions when filling: When filling, using a mixture of cleaning solution and water can help prevent the cleaning solution from freezing in cold weather and improve cleaning performance. 4. Introduction to windshield washer fluid: Generally, windshield washer fluids on the market are divided into three categories. The first type is for summer use, which includes insect remover additives to quickly clean insect residues on the windshield and effectively remove insect marks on the front of the car. The second type is antifreeze windshield washer fluid for winter use, ensuring it does not freeze or damage car components even when the temperature drops below -20°C. In cold winter weather when cleaning the windshield is necessary, this fluid not only cleans effectively but also helps absorb static electricity. The third type is a special antifreeze formula, guaranteed not to freeze even at -40°C, making it suitable for the extremely cold regions in the northernmost parts of the country.
Was this review help?
19
3
Share
More Forum Discussions

How to Solve the Oil Burning Issue in Citroen C4L?

Solutions for oil burning in Citroen C4L include using higher quality engine oil and avoiding frequent rapid acceleration and prolonged high-speed driving. Use higher quality engine oil: The main cause of oil burning is often related to the quality of the engine oil. Therefore, it is crucial to carefully select the oil when refilling. Poor-quality engine oil can lead to issues such as carbon buildup and seal aging. Replacing the engine oil with a higher quality product can help reduce oil burning. Avoid frequent rapid acceleration and prolonged high-speed driving: When the engine operates at extremely high speeds, it can cause the lubricating oil film to break, leading to inadequate lubrication and dry friction in rotating parts. If this becomes a habitual practice, it can result in abnormal engine wear and oil burning. Hence, maintaining an economical driving speed is one of the best ways to prevent oil burning. Ensure proper oil filling procedures: If the oil level exceeds the midpoint during refilling, the excess oil should be removed by the mechanic. Additionally, the oil level should be checked the next morning before driving for accurate measurement.
6
2
Share

Can a Car Pass Inspection After Applying Film on the Roof?

Whether a car can pass inspection after applying film depends on the proportion of the film applied. According to regulations, the national standard for vehicle inspection clearly stipulates that the light transmittance of the front windshield film must be greater than 70%, reflective film is not allowed on the front windshield, and no film is permitted within the rearview mirror area. Which car modifications can pass annual inspection? 1. Replacement of wear-prone parts is allowed: First, the wheel rims cannot be changed as per the driver's license, but the tires can be replaced. Tires are inherently consumable items. If a new car uses the same tires for six years before inspection, it is clearly impossible. Besides tires, wear-prone parts like wiper blades and brake pads can be modified or replaced with other brands without much issue. 2. Interior modifications are acceptable: Most interior modifications are also fine. Installing a dashcam, upgrading the central control screen, adding navigation, or modifying the audio system at your own expense won’t be interfered with by traffic police as long as safety performance isn’t compromised. 3. Air filter modifications: Minor modifications to less visible parts can pass inspection, such as replacing the original air filter with one that filters PM2.5 and includes activated carbon due to poor air quality. This is generally not an issue. 4. ECU tuning, brake disc, and caliper replacements: Tuning the ECU, replacing the grille with a high-ventilation version, or upgrading brake discs and calipers won’t affect the inspection. 5. Spark plug replacements: Replacing standard spark plugs with platinum or iridium spark plugs is also acceptable for inspection. 6. Anti-collision device modifications: Small and micro passenger vehicles can modify damaged front and rear anti-collision devices. For trucks, adding windshields, water tanks, toolboxes, spare tire racks, etc., are all legal modifications.
13
2
Share

What does X-Trail ECO mean?

ECO refers to the vehicle's economical driving mode function. ECO is an English abbreviation formed by the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active Eco driving mode and non-active Eco driving mode. When the Eco indicator light on the dashboard illuminates, it indicates that the vehicle's economical mode has been activated. Eco mode is categorized into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to enable it. When the driver presses the Eco mode switch, the dashboard indicator light immediately illuminates, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. Non-active Eco mode does not have a dedicated button. When the dashboard Eco indicator light illuminates, it serves merely as a reminder function. The Eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the Eco indicator light. Most vehicles employ the active Eco driving mode, meaning they have their own switch button. Therefore, during daily driving, the Eco mode can generally be enabled. However, it is unnecessary to activate Eco mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of Eco mode but could also negatively impact the vehicle's power. Additionally, the Eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the system prioritizes speed, causing the Eco mode to automatically deactivate. During idle parking or when in N/P gear or manual mode, the Eco mode may also become ineffective. When high torque output is required, such as during hill climbing, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the Eco mode will not function in such scenarios.
13
2
Share

Where is the cigarette lighter fuse of Chery A3?

Chery A3 cigarette lighter fuse is located on the lower left side of the steering column. It is rare for the actual cigarette lighter structure to be damaged, and the possibility of failure caused by a blown fuse is relatively high. Fuse box location and function: Generally, there are two fuse boxes in a vehicle. One is located in the engine compartment and is responsible for the normal operation of external electrical components, such as headlights, horns, the vehicle's computer, the air conditioning compressor, and the windshield washer motor, providing circuit protection. The other is located on the left side of the steering wheel or inside the glove box, responsible for the normal operation of internal electrical components, such as power windows, the cigarette lighter, power seats, and airbags. Types of automotive fuses: There are also two different types of automotive fuses. One is the blade-type fuse, which is thin and plug-in, allowing a circuit current of 5-25A. The other is the slow-blow fuse, which is square and plug-in, allowing a circuit current of 20-60A. The color of the fuse represents its amperage, and different amperages can be easily distinguished based on the color. The amperage is also marked on the fuse.
19
4
Share

Does the Mercedes-Benz C200 require matching after battery disconnection?

After disconnecting the battery of the Mercedes-Benz C200, no matching is required. For Mercedes-Benz models, when replacing the battery, unlike other German cars that require matching, as long as the battery model and ampere-hour rating match, no matching is needed. It is important to note that during battery installation, the positive and negative terminals must not be reversed. The following are precautions for using the battery: Precautions for using the battery - Avoid prolonged parking of the vehicle: The vehicle's battery will self-discharge during extended periods of inactivity, so it is best to drive the car at least once a week, preferably for more than 20 minutes, to allow the battery to charge while driving. Precautions for using the battery - Close windows before turning off the engine: The operation of the car's windows and sunroof relies on battery power, so it is best to close all windows before turning off the engine, rather than after. Avoid using the long-press lock button method to close windows after leaving the vehicle. Precautions for using the battery - Maintain the battery's cleanliness: Regular inspections are an effective way to extend the battery's lifespan. Use a professional battery terminal brush or an old toothbrush to clean dust and corrosion from the battery's positive and negative terminals. Apply a layer of protective coating, such as petroleum jelly or grease, to the contact surfaces.
2
3
Share

Where is the Avalon produced?

Avalon is a flagship model launched by Toyota Motor Corporation in the U.S. market in the 1990s. FAW Toyota has three major production bases located in Tianjin, Changchun (Jilin), and Chengdu (Sichuan) in China, with the Avalon being produced at the Tianjin and Chengdu plants. FAW Toyota Motor Co., Ltd. is a joint venture established by China FAW Group and Japan's Toyota Motor Corporation in June 2000. Headquartered in Tianjin, China, the company was formerly known as Tianjin Toyota Motor Co., Ltd. It covers an area of 1.61 million square meters and has an annual production capacity of 420,000 vehicles. The company has a registered capital of 3.3 billion yuan and is registered in the Tianjin Economic-Technological Development Area. In addition to the 'Avalon,' FAW Toyota's product lineup mainly includes the 'Vios,' 'Corolla,' 'Allion' sedans, as well as the 'IZOA,' 'RAV4,' 'Crown Kluger' SUVs, and the 'Coaster' bus. The Avalon is positioned as a mid-to-large-sized sedan, sharing the same segment as the Toyota Crown. The fifth-generation Toyota Avalon is built on Toyota's latest TNGA platform and is available in both hybrid and gasoline versions.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.