···
Log in / Register

What brand is the dash cam at Audi 4S stores?

6Answers
DeLeah
07/29/2025, 09:39:58 AM

The dash cams at Audi 4S stores are determined by the procurement situation of the 4S stores, and the brands vary at different times. It is best to check the dash cam label for confirmation. The relevant introduction of the dash cam is as follows: The function of the dash cam: A dash cam is an instrument that records images, sounds, and other related information during vehicle driving. After installing a dash cam, it can record the entire driving process of the car, including video images and sounds, which can provide evidence for traffic accidents. For those who enjoy self-driving tours, it can also be used to record the process of conquering difficult and dangerous roads. Precautions for using a dash cam: The video footage recorded by the dash cam should not be edited. If edited, it cannot provide assistance in the event of an accident. This is also to prevent the unavoidable fraudulent behavior in today's society.

Was this review help?
101
Share
VanMorgan
08/14/2025, 12:41:09 AM

Last year, I had a dashcam installed at the Audi 4S dealership. The brand was something like Garmin, but I don’t remember the exact model. The staff mentioned it was an original equipment manufacturer (OEM) collaboration device. The video quality is super clear, especially when driving at night—even with oncoming headlights, it can still capture license plate details, saving me the worry of not seeing the road clearly. The installation process was straightforward. The technician neatly hid the wires out of sight and adjusted the angle for free. The only downside is the price—it cost over 1,000 RMB, which is a bit more expensive than online options, but it comes with a one-year warranty. If any issues arise, I can just go back to the dealership for a fix without the hassle of dealing with it myself. I think products from 4S dealerships are quite reliable, perfect for those who don’t want to spend time researching—just a hassle-free solution. If your budget allows, you can also add parking surveillance for theft and scratch protection, making daily driving much more reassuring. Next time I go for maintenance, I plan to upgrade the firmware as well.

Was this review help?
9
Share
Expand All
Jared
10/10/2025, 12:32:54 AM

Having spent a long time in the car dealership industry, I've learned that the dashcam brands in Audi 4S stores are mostly OEM products, commonly manufactured by Thinkware or BlackVue. The quality is good, with high-definition recording and support for WiFi video downloads, but the prices are on the higher side—full installation costs around two thousand. It's more cost-effective to have it installed when purchasing the car, as it saves on labor fees. During installation, technicians will route the wiring properly to avoid interference with airbags or circuits. The warranty is better than at regular shops, with some offering two years of service, making it suitable for car owners who prioritize stability and convenience. Choose a dashcam with a wide-angle lens to cover the front view and prevent accidents in blind spots. Regularly maintain the lens to keep it clean and free from dust, ensuring clear recording during critical moments.

Was this review help?
16
Share
Expand All
SpencerLee
11/23/2025, 12:42:32 AM

Audi 4S dealerships don't have fixed brands for dash cams, likely just rebranded products from their partners. The prices are ridiculously high, often over a thousand yuan. You're better off buying a 70mai or Xiaomi dash cam on JD.com for a few hundred yuan - you'll get similar functionality. Of course, 4S shops have the advantage of professional installation and service. Their technicians are skilled at hiding wires neatly without affecting interior aesthetics. If you're concerned about compatibility, choosing genuine OEM parts is safer to avoid damaging Audi's electronic systems.

Was this review help?
10
Share
Expand All
LydiaLynn
01/13/2026, 02:18:14 AM

From a safe driving perspective, a dash cam is an essential tool. The brands provided by Audi 4S stores, such as Nextbase, offer high-definition night vision capabilities, effectively preventing hit-and-run scams or loss of accident evidence. After installation, remember to check if the lens is clean to avoid fogging during rainy days, which could affect recording quality. The 4S store services are comprehensive; although the prices are higher, the quality is guaranteed, making them suitable for car owners who prioritize safety. Pair it with regular vehicle inspections to ensure stable power supply and prevent battery drain.

Was this review help?
7
Share
Expand All
VanAdalynn
04/09/2026, 10:49:14 PM

As a tech enthusiast, I'm focused on the details of Audi dash cams. These devices are typically OEM by BlackVue, featuring 1080p resolution and wide-angle lenses. How do they integrate with vehicle infotainment systems? Some models support remote video viewing via apps. Night vision relies on advanced sensors, with Sony chips being a solid choice. During installation, pay attention to cable quality to avoid GPS signal interference. When purchasing, check the frame rate - 60fps is recommended for smooth recording, ensuring greater driving peace of mind.

Was this review help?
10
Share
Expand All
More Q&A

What to Do When the Airbag Light Is On?

One of the most common causes is a disconnected or poorly connected plug. Check the connection of each plug and reconnect them one by one. Inspect the contact condition of each grounding wire. Since poor contact is usually not visible to the naked eye, the best approach is to tighten all grounding connections.
105
Share

How to fold down the rear seats of the BMW X2?

Press the lumbar support switch to adjust the seat angle at the lumbar position; use the forward and backward switch to control the seat's forward and backward movement. Adjust the backrest tilt angle by pulling forward or backward—pushing forward tilts it forward, while pulling backward tilts it backward. To adjust the leg rest position, push the leg rest forward or backward. Push the button in the middle of the seat backrest forward to tighten the shoulder area of the seat. Hold the front or rear end of the backrest clamping button to adjust the lumbar wrapping of the seat.
112
Share

What is the method to reset the maintenance light on a Mercedes-Benz?

Use the selection buttons on the steering wheel to display the odometer interface on the dashboard. Press and hold the "OK" button on the left control area of the steering wheel while simultaneously pressing the "Phone" button on the right side of the steering wheel. A menu will then appear. Start the vehicle or press the left button on the dashboard twice while the ignition is on, then turn off the engine. Hold the button without releasing it and start the engine.
107
Share

How to Cancel the Mercedes-Benz Tire Pressure Monitoring Indicator Light?

Adjust the tire pressure to the standard value, then turn on the ignition switch and press the multifunction button on the left side of the steering wheel to bring up the menu interface on the instrument panel. Select "Tire Inflation Pressure" and press the "OK" button, wait for the instrument panel to prompt "Drive for a few minutes. The instrument panel will display "Reactivate Tire Pressure Monitor". This completes the operation to cancel the Mercedes-Benz tire pressure monitoring indicator light.
118
Share

Can I Check My Driving Test Scores on My Phone?

You can check your driving test scores on your phone by downloading the [Traffic Management 12123] APP. After successfully logging into the APP, click on [Driver's License] to view your driving score. Regulations related to the driving test: After passing the subject one test, candidates can schedule the subject two (field test) or subject three (road test) individually, or schedule both subject two and subject three to be taken consecutively on the same day. Notes for practicing subject two: Do not forget to release the handbrake when starting, otherwise the engine will stall. When holding the steering wheel, always keep both hands at the three and nine o'clock positions.
114
Share

Will there be any impact if one tire is different from the other three?

There will be an impact if one tire is different from the other three. In the case of replacing only one tire, the new tire must have a tread groove depth close to that of the other tire on the same axle; otherwise, it may cause issues such as vehicle deviation. Precautions for tire replacement: The purchased tire specifications must first be consistent with the original tire specifications installed on the vehicle. Tires of the same specification, structure, manufacturer, and tread should be installed on the same axle. Tire replacement should comply with the manufacturer's recommendations: When replacing, the tire specifications must meet the requirements and recommendations of the vehicle manufacturer, meaning the load index of the replacement tire must be greater than or equal to that of the original tire, and the speed rating of the replacement tire must be greater than or equal to that of the original tire.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.