Where is the Focus electric fan relay located?

2 Answers
Theo
07/24/25 6:09pm
Focus electric fan relay is located in the fuse box in the engine compartment. The replacement method for the electric fan relay: 1. First open the car's hood and remove the intake pipe located above the fan; 2. The electric fan and air conditioning fan are located on the fan bracket with four corners in total, use professional tools to unscrew these four screws; 3. When all screws are unscrewed, the relay can be removed from the car; 4. Install the new relay correctly on the new fan bracket and tighten the four corner screws; 5. Start the engine to test whether the fan can operate normally, and after checking for no errors, reinstall the intake pipe to the correct position.
Was this review help?
5
0
Share
SanPaislee
08/11/25 10:06am
I think the location of the electronic fan relay in the Focus is quite straightforward. It's usually inside the fuse box in the engine compartment, which is a small black plastic box you can see after opening the hood. I often drive a Focus MK4, and its relay is in the third position of the driver-side fuse box, labeled as R3 or Fan. If you're going to look for it yourself, first turn off the engine and disconnect the negative terminal to prevent accidents. Then open the fuse box cover and check the small labels inside. The Ford manual has a diagram in one of its chapters to help you locate it quickly. If the fan stops working, it might be due to a burnt or loose relay, which can cause the car to overheat and affect the engine, so it needs to be addressed promptly. I replaced mine last time—just bought the correct relay model, removed the old one, and installed the new one in about five minutes. But I recommend beginners check the manual or watch online videos to confirm the model and avoid mistakes.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

What brand is green-max tires?

green-max is a product called GREEN-MAX Green Run under Linglong Tires, produced by Shandong Linglong Tire Co., Ltd. Shandong Linglong Tire Co., Ltd. is among the world's top 20 tire manufacturers and the second largest tire producer in China. The main technical features of green-max tires include: 1. High handling performance. 2. Excellent drainage performance, effectively reducing the occurrence of hydroplaning. 3. Superior stability. 4. Comfortable ride experience. 5. Suitable for high-end cars and sports cars. From the above parameters, it can be seen that green-max tires have excellent wet performance, low noise, and are ultra-high-performance tires. GREEN-Max focuses on high cost-performance and is very popular in the replacement tire market.
9
3
Share

What are the length, width, and height of the BMW 630?

The body length is 5103 (mm), width is 1904 (mm), height is 1550 (mm), and the wheelbase is 3070 (mm). As a mid-size to large car, this model's body dimensions are fairly standard. Introduction to car dimensions: The length, width, and height data represent the external dimensions of the car body. The width measurement does not include the side mirrors, and the height measurement includes the roof rack but not the antenna. Vehicle classification is generally based on body length and wheelbase. Actual car space: Even if two cars have the same body dimensions, it doesn't mean their interior space is identical. When choosing a car, don't just look at the data; it's important to actually experience the interior space.
20
2
Share

What causes gear shifting jerking in Mercedes-Benz S-Class?

Every vehicle will have some degree of gear shifting jerkiness, it's just a matter of intensity difference. Here are the specific reasons: Driver's poor control technique: The intensity of gear shifting jerkiness is closely related to the driver's control skills. If the timing of gear shifting isn't properly grasped, natural jerkiness will occur. Mismatch between RPM and gear position: Generally speaking, at low speeds when engine RPM and vehicle speed just meet the shifting standard, upshifting will produce stronger jerkiness; if the throttle is slightly larger and both engine RPM and vehicle speed are significantly higher than the shifting standard, the shifting jerkiness will be relatively smaller.
13
4
Share

What color seat covers match an all-black interior?

An all-black interior can be paired with black, beige, pink, or purple seat covers. Here are the specific details about automotive interiors: 1. Related automotive products: Automotive interiors mainly refer to the products used for internal modifications of vehicles, covering all aspects of the car's interior, such as steering wheel covers, car seat cushions, floor mats, car perfumes, hanging accessories, interior decorations, storage boxes, etc. 2. Interior system design: The automotive interior system is an important part of the vehicle body. The design workload for the interior system accounts for more than 60% of the total automotive styling design, far exceeding the exterior design, making it one of the most crucial parts of the vehicle body.
18
4
Share

In which year was the Regal facelifted?

2020 was the year of the facelift, with the new Buick Regal officially launched. Along with the previously released Regal GS 2020 model, the entire Regal series has been fully updated. Buick Regal Models: The new car launched a total of 4 models, with some exterior changes and a slight reduction in power. Buick Regal Exterior: The 2020 Buick Regal underwent some 'minor cosmetic adjustments' to the front face. The winged chrome decoration on the grille was changed to a straight line, and the headlight design somewhat resembles the teardrop style previously seen in Audi models, with variations in the lower bumper style. The main changes at the rear are in the lower bumper, which now features dual exhaust decorations, though the actual exhaust remains hidden.
10
3
Share

What faults will occur if the Audi gear position sensor malfunctions?

Symptoms of a faulty gear position sensor: The instrument panel cannot display the correct gear position; Difficulty starting the vehicle; The car cannot shift gears normally; There is a jerking sensation when shifting up or down; Lack of power during acceleration, accompanied by shaking. Introduction to the gear position sensor: The gear position sensor, also known as the gear switch sensor, is generally equipped in automatic transmission models and is used to detect gear position signals. Principle of the gear position sensor: The gear position sensor has multiple contacts. When the car shifts gears, the contacts move to the corresponding gear position, the voltage value changes, the gear position sensor detects the gear shift signal, and transmits the signal to the transmission computer, thereby controlling the corresponding actuators to work.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.