···
Log in / Register

Where is the engine number located on the BMW 730?

2Answers
DelEllie
08/28/2025, 02:48:29 AM

The engine number of the BMW 730 is located on the engine block. It is generally a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be viewed in the following 4 ways: The vehicle's driving license has the engine number printed on it, usually located on the second last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, where each engine can only have one engine number and each engine's number is unique.

Was this review help?
110
Share
DiLeo
05/09/2026, 06:25:42 AM

Take my BMW 730 as an example, the engine number is located in the engine compartment, on the upper front part of the engine, engraved on the cylinder block. It's usually near the intake pipe, and the number needs good lighting to be read clearly. You'll need to find it for maintenance or when selling the car, as this is the unique identifier for the vehicle's engine. Safety tip: Wait until the car has cooled down before checking, and avoid touching hot components. The location may vary slightly between different model years, but it's generally similar. If you're unsure, ask someone who frequently works on cars - they have plenty of experience.

Was this review help?
4
Share
Expand All
More Q&A

Why Shouldn't You Refuel at Service Areas?

Some car owners have experienced acceleration issues and bumpiness after refueling at highway gas stations, leading them to believe it's best to avoid refueling at these locations. Additionally, service areas often see crowded refueling situations, which can lead to a series of problems. First, long queues of vehicles waiting to refuel can easily block the entrance to the service area. Second, drivers in a hurry to refuel and continue their journey may cut in line, leading to disputes. Below are some precautions for driving on highways: 1. Drive in the designated lane: Highways have clearly marked lanes for large vehicles, small vehicles, etc. When overtaking, once you occupy a lane, return to your original lane promptly after completing the maneuver. Do not occupy other lanes for extended periods. Additionally, emergency lanes should not be occupied without special reasons. 2. Maintain a safe speed and avoid speeding: The dangers of speeding are well-known, as it can lead to irreversible consequences, whether on local roads or highways. 3. Maintain a safe following distance: Under normal conditions, on dry roads with good braking, the following distance (in meters) should not be less than the speed (in km/h). For example, at 80 km/h, maintain at least 80 meters; at 100 km/h, maintain at least 100 meters. Always pay attention to roadside distance markers. In rainy, foggy, snowy, or wet conditions, the following distance should be doubled. 4. Observe traffic signs: Always be aware of roadside and overhead signs and markings while driving. Stay appropriately to the right to avoid crossing the right lane divider, ensuring sufficient lateral distance for overtaking vehicles. 5. Do not occupy emergency lanes unnecessarily: Traffic accidents are inevitable on highways. If other vehicles cause a blockage, avoid occupying the emergency lane, as this may hinder rescue operations. 6. Avoid fatigue driving and take timely breaks: Fatigue driving is extremely dangerous on highways. When fatigued, reaction times slow down, making it difficult to respond correctly to sudden situations.
118
Share

How to Reset the Tire Pressure on Tiguan?

Tiguan tire pressure reset steps: There is a button in front of the gear lever that resembles a basin with an exclamation mark inside. This is the tire pressure setting button. Adjust the tire pressure to the standard level, turn on the ignition, and press and hold this button. Wait until a similar yellow warning light appears on the dashboard and then goes off, indicating the reset is complete. What to do if tire pressure is insufficient: If no damage is visible on the car's tires, simply inflate them to the normal pressure and reset the tire pressure system. If inspection reveals a puncture in the tire, drive to a repair shop promptly to have it fixed before reinflating. If the tire pressure warning reappears some time after inflation without any punctures, it might be due to air leakage caused by a deformed wheel hub. It is recommended to inspect the wheel hub and replace it if necessary. How tire pressure monitoring works: Pressure sensors installed inside the tires measure the tire pressure, and wireless transmitters send the pressure data from inside the tire to a central receiver module.
114
Share

How Long Does the Battery in a Boyue Car Key Typically Last?

The battery in a typical car remote key can last for about 3 years. If the battery runs out, it is recommended to replace it immediately. Below is some relevant information about the Boyue: 1. The Boyue is a compact SUV under the Geely brand, which has gained immense popularity among young consumers since its launch. 2. The Boyue is equipped with three types of engines: a 1.5L turbocharged engine, a 1.8L turbocharged engine, and a 2.0L naturally aspirated engine. (1) The 1.5L turbocharged engine has a maximum power output of 130kW and a maximum torque of 255 Nm, with the maximum power achieved at 5500 rpm and the maximum torque available between 1500 and 4000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head. (2) The 1.8L turbocharged engine delivers a maximum power of 135kW and a maximum torque of 300 Nm, with the maximum power at 5500 rpm and the maximum torque between 1750 and 4000 rpm. This engine also employs direct fuel injection technology and uses an aluminum alloy cylinder head along with a cast iron cylinder block. (3) The 2.0L naturally aspirated engine produces a maximum power of 104kW and a maximum torque of 178 Nm, with the maximum power at 6000 rpm and the maximum torque between 4000 and 4500 rpm. This engine utilizes multi-point fuel injection technology and features an aluminum alloy cylinder head and block.
117
Share

What causes the touchscreen failure in the Tiggo 5's center console?

Tiggo 5's center console touchscreen failure is due to a malfunction in the dashboard. Here are specific details about the Tiggo 5: 1. Interior: The new vehicle features a high-mounted secondary instrument panel design, equipped with a 4.8-inch color TFT trip computer display, Hydrographics intelligent sensing center console trim, and an asymmetrical air vent design. The ergonomic seats, developed by an Australian R&D team, emphasize comfort, with the Tiggo 5 setting requirements for idle noise control, driving noise levels, and in-cabin speech clarity. 2. Powertrain: The Tiggo 5 is powered by a 1.5T turbocharged engine, paired with either an Aisin 6MT or a Getrag DCT transmission.
110
Share

How to Deal with the Tire Pressure Warning on the Lynk & Co 03?

When the tire pressure warning appears on the Lynk & Co 03, you should stop to check the tire pressure and then clear the warning. Below are detailed explanations about tire pressure: 1. Definition: Tire pressure, strictly speaking, refers to the air pressure inside the tire. 2. Importance: Air pressure is crucial for tires; both too high and too low pressure can shorten the tire's lifespan. Low pressure increases tire deformation, leading to cracks on the tire side, excessive flexing, overheating, rubber aging, fatigue in the cord layers, and cord breakage. It also increases the tire's contact area, accelerating shoulder wear. High pressure overextends the tire cords, reducing elasticity and increasing the load on the tire during driving, which can cause internal cracks or blowouts upon impact. Additionally, high pressure accelerates tread wear and reduces resistance to punctures.
107
Share

Which Four Types of Car Insurance Should You Buy?

Here are the four essential types of car insurance you must purchase: 1. Compulsory Traffic Insurance: This insurance is mandatory—you cannot drive without it. It ensures that the insurance company compensates the victim according to the contract in case of an accident. Note that the victim does not include the policyholder or passengers inside the vehicle. 2. Passenger Liability Insurance: Since passengers are often present in the car, this insurance ensures compensation from the insurance company in case of an accident. 3. Third-Party Liability Insurance: This covers damages involving a third party (other than the car owner and the insurance company). Accidents where the owner hits another driver are unavoidable, and this insurance helps the company bear part of the compensation, reducing the owner's financial burden. 4. No-Deductible Additional Insurance: Normally, insurance companies have a deductible rate where they don’t cover a portion of the claim, requiring the owner to pay out of pocket. With this insurance, the company covers the full compensation.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.