Where is the drainage outlet located under the chassis of the Tiguan?

1 Answers
StZachary
07/30/25 3:11am
The air conditioning drainage outlet is located in the central aisle on the passenger side. There are generally 1-2 door drainage holes at the lower part of the door panel. The trunk drainage hole is usually under the spare tire in the trunk, and the spare tire area is one of the lower positions of the vehicle body. Below are specific details about the Tiguan: Exterior: The Volkswagen T-ROC concept car features an air intake grille connected to the headlights, with two circular recesses on the bumper, giving it a rugged overall appearance. Additionally, the new car is equipped with front and rear protective plates and 19-inch wheels. Powertrain: The new car is powered by a 1.0T three-cylinder turbocharged engine, a 1.5T engine, and a 2.0T engine, offering both front-wheel drive and four-wheel drive versions, paired with a six-speed manual or seven-speed DSG dual-clutch transmission.
Was this review help?
1
0
Share
More Forum Discussions

How Many Liters of Engine Oil Does the Buick Excelle 3-Cylinder Require?

Buick Excelle 3-Cylinder engine oil generally requires approximately 4.5 liters. Additional information: 1. The 3-cylinder Excelle can use 5W30 grade engine oil. For extremely cold or hot regions, 0W30 or 5W40 may be appropriate alternatives. 2. The Buick Excelle is equipped with two powertrain combinations: a 1.3T dual-injection turbocharged engine paired with a 6-speed DSS intelligent dual-clutch transmission, and a 1.0T dual-injection turbocharged engine paired with a 6-speed DCG intelligent dual-clutch transmission. The former delivers a maximum power of 120kW at 5500 RPM and peak torque of 230Nm between 1800 to 4400 RPM, while the latter produces a maximum power of 92kW at 5600 RPM and peak torque of 170Nm between 1700 to 4400 RPM.
16
3
Share

Why Can't the Car Shift Gears After Rain?

Difficulty in shifting gears after rain is not related to the rain itself; it may be caused by loosening of the transmission gear set. Additional information is as follows: 1. Purpose of Gear Shifting: It utilizes the engine's resistance to help the vehicle better perform parking braking. Since first gear and reverse gear are the two gears with the largest transmission ratio in the car's transmission, and also the two gears with the smallest transmission ratio when power is reversed, using first gear and reverse gear for engine parking braking provides the greatest braking force and the best braking effect. 2. Gear Shifting Techniques: When shifting gears, always remember the principle of 'accelerate before upshifting, decelerate before downshifting.' Before upshifting, 'step on' the accelerator to increase the speed first; before downshifting, 'release' the accelerator to reduce the speed first.
12
1
Share

What are the advantages of a multifunction steering wheel?

Multifunction steering wheel refers to a steering wheel equipped with function buttons on both sides or below, allowing the driver to operate more conveniently. The multifunction steering wheel includes controls for audio, air conditioning, car phone, and some even have cruise control buttons set on the steering wheel. The following is a related introduction about multifunction steering wheels: 1. Multifunction steering wheels are a trend in the development of automotive steering wheels. Moreover, there are many advantages to multifunction steering wheels: drivers can directly control many electronic devices in the car from the steering wheel without having to search for various buttons on the central console, allowing them to focus more on the road ahead and greatly improving driving safety. 2. With the development of automobile manufacturing and user needs, more and more cars are equipped with multifunction steering wheels, and many configurations that originally belonged to high-end cars have also become popular. For example, functions such as adjusting the steering wheel up, down, left, and right. This also greatly enhances the fun of driving.
15
5
Share

Does a Car Radiator 'Boiling Over' Cause Damage to the Engine?

Yes, a car radiator 'boiling over' can cause damage to the engine. The temperature of the radiator can be observed from the car's coolant temperature gauge, which generally should not exceed 95°C. When the temperature reaches 100°C, you should stop driving immediately. Below are the hazards of a radiator boiling over: 1. Electric fan damage: If there are issues in the cooling system such as a damaged thermostat, faulty electric fan, or low coolant level, the coolant in the radiator cannot cool down, leading to increased water temperature. 2. Disruption of normal clearances between parts: This prevents the maintenance of proper oil films between parts, which can result in minor issues like engine cylinder or bearing damage, or in severe cases, complete engine failure or even total loss.
14
5
Share

Why can't a new car be tinted immediately?

New cars cannot be tinted before obtaining the official license plate. Prior to registration, new vehicles must undergo safety technical inspections, and tinted windows may fail the inspection. Below is a detailed introduction to the pros and cons of car window tinting: 1. Good privacy protection: Generally, car window films are one-way, which can protect the owner's privacy, but requires careful selection by the owner. 2. Shatterproof function: In case of an accident, the glass with film will stick together when shattered, preventing glass fragments from scattering, thus protecting passengers. 3. Thermal insulation: High-quality car window films can provide thermal insulation effects. In summer, they can effectively control the rise in cabin temperature, while in winter, they can suppress heat dissipation, maintaining a comfortable temperature inside the car. 4. Reduced light transmittance: The light transmittance of car window films does not exceed 90%, especially when applied to the front windshield, which may reduce visibility and compromise driving safety.
14
2
Share

How to Replace the Bulb on a Chevrolet Sail 3?

The method to replace the bulb on a Chevrolet Sail 3 is as follows: 1. Open the engine hood and locate the dust cover at the back of the headlight assembly. Twist the dust cover off directly along the thread direction; 2. After removing the dust cover, find the bulb socket inside the headlight assembly. Pinch the wire clip next to the socket, and once the clip loosens, the bulb can be removed; 3. Install the new bulb, reattach the dust cover, and close the engine hood. Taking the 2018 Chevrolet Sail 3 as an example, its body structure is a 4-door, 5-seater sedan with dimensions of length 4300mm, width 1735mm, height 1503mm, a wheelbase of 2500mm, a fuel tank capacity of 39 liters, a trunk capacity of 366 liters, and a curb weight of 1067kg.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.