Where is the Corolla Fuse Box Located?

What are the differences between the Middle East version and the China version?

The differences between the Middle East version and the China version are: 1. Different four-wheel drive systems: The Middle East version features full-time four-wheel drive with a central differential and central differential lock; while the China version uses part-time four-wheel drive. 2. Different powertrains: The Middle East version offers three powertrain options - 2.7L, 4.0L, and 2.8L; whereas the China version only has a 3.5L powertrain. 3. Different front-end designs: The Middle East version has an additional chrome anti-collision bar as a signature design element; the China version lacks this chrome bar. 4. Different roof configurations: The Middle East version comes with roof racks, body decals, and side door trim; these are absent in the China version. 5. Different seating capacities: The Middle East version has 7 seats compared to the China version's 5 seats. Most parallel-imported vehicles are Middle East versions.

5

Share

Is it troublesome to renew a driver's license that has been expired for one month?

No, it's not troublesome for the following reasons: 1. Time limit: If your driver's license has been expired for less than one year, you can still go through the normal renewal procedure. 2. Restrictions: A driver's license is considered expired the day after its expiration date, and according to regulations, driving with an expired license is not allowed. Consequences of not renewing on time: 1. If your driver's license has been expired for more than one year but less than three years, it will be in a "canceled but recoverable" status during this two-year period. Although the license is canceled, it can still be reinstated. Solution: The driver just needs to take the subject one test at the vehicle management office, and upon passing, can proceed with the normal renewal procedure. 2. If your driver's license has been expired for more than three years, it will be in a "canceled" status, meaning the driving qualification is revoked and cannot be reinstated. Solution: The driver must retake all the tests like a new applicant and obtain a new driver's license.

5

4

Share

What are the symptoms of a blown engine cylinder head gasket?

Failure manifestations after the cylinder head gasket is blown: Due to different locations of the gasket damage, the symptoms of failure vary. If the engine cylinder communicates with the cooling water jacket or the lubricating oil passage, yellow-black oil foam will float on the upper surface of the coolant in the radiator, or there will be obvious water in the oil pan. When these two types of gas channeling are severe, the exhaust will contain water or engine oil. In addition to the above phenomena, there are also the following symptoms: 1. Bubbles appear: High-pressure gas from the gas-oil passage enters the lubricating oil passage connected between the engine block and the cylinder head. The oil temperature in the oil pan remains high during engine operation, the oil viscosity becomes thin, the pressure decreases, and the oil deteriorates quickly. The oil sent to the valve train in the upper part of the cylinder head clearly contains bubbles. 2. Insufficient power: Gas channeling between two adjacent cylinders. Without opening the decompression, when turning the crankshaft, it feels like the pressure in both cylinders is insufficient. When starting the engine, there is a phenomenon of black smoke, the engine speed drops significantly, and the power output is insufficient.

7

1

Share

How to Reset the Maintenance Light on the Excelle?

Method to reset the maintenance light on the Excelle: 1. Turn on the ignition; 2. Press the "MENU" button on the control stalk; 3. Use the adjustment wheel to switch and select the "Vehicle Information Menu"; 4. Rotate the adjustment wheel to select "Oil Life"; 5. Press and hold the "SET/CLR" button for several seconds; 6. The dashboard display will show 100% oil life, indicating a successful reset. The Buick Excelle has a body size of 4609mm in length, 1798mm in width, and 1486mm in height, with a wheelbase of 2640mm. In terms of power, the vehicle is equipped with two drivetrain combinations: a 1.3T dual-injection turbocharged engine paired with a 6-speed DSS intelligent dual-clutch transmission, and a 1.0T dual-injection turbocharged engine paired with a 6-speed DCG intelligent dual-clutch transmission.

19

3

Share

What are the reasons for not smoothly shifting gears?

The specific reasons for not smoothly shifting gears: 1. Premature commands: Shifting gears before the voice prompt. 2. Too fast shifting: Generally, when passing through neutral gear, a slight pause (about 0.5~1 second) is needed to allow the computer to sense the gear passing through neutral. If the operation is too fast, neutral gear usually cannot be sensed. Below are specific introductions to gear selection in different road conditions: 1. Uphill: This type of road requires high torque intervention, so you can use "D-" to downshift. However, sometimes when the power is sufficient, you also need to use "D+" to upshift to prevent power waste and damage to the engine and transmission. When encountering steep slopes, even after downshifting, the vehicle may still lack power. In this case, use the S gear (sport mode). 2. Downhill: Use "D+" to shift up to D2 or D3 gear, which can restrain the engine to achieve a braking effect. Generally, 2-3 gears are sufficient for moderate slopes, but when encountering steep slopes, pay attention to switching to 1st gear. If the vehicle starts to slide faster, use "D-" to downshift and control the vehicle.

4

5

Share

How often should BMW spark plugs be replaced?

BMW spark plugs generally need to be replaced every two years or 40,000 kilometers. If spark plugs are not replaced for a long time, it may cause various issues such as leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and most importantly, difficulty in ignition, affecting the normal use of the vehicle. Spark plug replacement interval: Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. The following standards can be used as a reference for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood and lift the engine's plastic cover. Remove the high-voltage distributor wires and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris such as leaves or dust and ensure they are thoroughly cleaned. Place the new spark plugs into the spark plug holes and hand-tighten them a few turns before using the socket to tighten them further. Reinstall the removed high-voltage distributor wires in the correct firing order and secure the cover.

5

1

Share

Where is the Corolla Fuse Box Located?

What are the differences between the Middle East version and the China version?

Is it troublesome to renew a driver's license that has been expired for one month?

What are the symptoms of a blown engine cylinder head gasket?

How to Reset the Maintenance Light on the Excelle?

What are the reasons for not smoothly shifting gears?

How often should BMW spark plugs be replaced?

How Large an Inverter Can a Sedan Power?

How Long After Missing an Inspection Will a Driver's License Be Revoked?

How often should a vehicle undergo inspection?

What is the problem when the steering wheel makes noise at full lock?