···
Log in / Register

Where is the computer connector located on the Citroën C4L?

4 Answers
MacLincoln
08/28/25 3:08am

The computer connector of the Citroën C4L is located above the USB port in the center console. Simply open the cover to see it. Taking the 2019 manual comfort model of the Citroën C4L as an example, its body dimensions are: length 4675mm, width 1780mm, height 1500mm, with a wheelbase of 2710mm, a fuel tank capacity of 60 liters, and a trunk capacity of 435 liters. The 2019 manual comfort model of the Citroën C4L features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 136PS, a maximum power of 100kW, and a maximum torque of 230Nm.

Was this review help?
16
3
Share
StGeorge
09/09/25 8:29am

I remember finding the diagnostic port on the Citroën C4L was quite straightforward. It's usually located below the steering wheel on the driver's side, inside the trim panel beneath the instrument cluster, near your knee position. I once encountered it being covered by a small plastic cap - prying it open revealed the blue 16-pin socket used for connecting computers or diagnostic tools to check vehicle issues like engine error codes or emission systems. Don't overlook cleaning dust accumulation during routine maintenance as it may affect connectivity. When reaching for it, straighten your steering wheel first to avoid knee scratches. If you can't locate it, consult the user manual or online tutorials - many manufacturers hide this component here for convenience. Regular inspection and cleaning of the port can prevent malfunctions. After years of driving, I realized this small detail matters more than expected.

Was this review help?
3
1
Share
Expand All
AlejandroFitz
10/24/25 2:33am

In the Citroën C4L I've driven, the computer port is generally located in the lower area of the driver's side dashboard. Specifically, it's in the region above your left leg near the steering wheel—just crouch down to spot it. That port is a standard OBD interface; connecting a device allows you to read data and help diagnose engine faults or battery issues. It's advisable to turn off the ignition before handling it to avoid accidental short circuits. Many new drivers complain about its high placement, but a simple bend and reach usually does the trick. If you can't find it, avoid forcefully pulling wires and instead consult a technician at the 4S store for safer guidance. Knowing its location can save significant time, such as enabling quicker self-checks when tire pressure anomalies occur.

Was this review help?
7
4
Share
Expand All
AlanLee
12/07/25 2:56am

Locating the OBD port on a Citroën C4L is straightforward—it's positioned beneath the dashboard on the driver's side, slightly to the left and lower near the steering column. I frequently plug my scanner into it to check oil pressure or warning lights. The port might have a small protective cover; just flip it open for access. Designed for driver convenience, you can easily reach it by hand. Regularly clean the port to prevent corrosion.

Was this review help?
16
4
Share
Expand All
More Forum Discussions

Does Tire Sealant Damage Tires?

Automotive tire sealant can indeed cause damage to tires. After using sealant, the tire surface may suffer corrosion, and the formation of a colloidal protective film on the tire surface can interfere with grinding and adhesion during the tire repair process. Tires are circular elastic rubber products mounted on various vehicles or machinery that roll on the ground. The functions of tires are: 1. To prevent automotive components from experiencing severe vibrations and premature damage, adapting to the high-speed performance of vehicles while reducing driving noise; 2. To support the full weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions; 3. To transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the vehicle's power, braking, and passability.
14
0
Share

What is the function of a blow-off valve in a car?

The function of a blow-off valve in a car is: 1. To ensure the boost pressure remains near the specified value, preventing engine damage; 2. To control the pressure in the intake pipeline below the limit value; 3. To protect the turbocharger. The blow-off valve automatically opens and closes based on the system's working pressure and is installed on equipment or pipelines in a closed system to protect system safety. The working principle of a car blow-off valve is: 1. Intake blow-off valve: After the return of oil, it releases the pressurized air before the throttle; 2. Exhaust blow-off valve: Under continuous boost conditions, to prevent turbo overpressure and engine knocking, it releases a small amount of gas to maintain the turbo's pressure.
19
2
Share

What Causes the One-Button Start Button Light to Flash?

The reasons for the one-button start button light flashing: 1. Installation of a dashcam or other electrical devices leading to incorrect wiring, i.e., improper power sourcing. The solution is to rewire. 2. Battery depletion. The solution is to replace the battery. 3. Key sensing issue. Sometimes strong nearby magnetic fields can cause interference, preventing the key from being detected. The solution is to point the key directly at the one-button start. 4. Steering wheel lock. The steering wheel locking is a normal anti-theft feature. This situation occurs when the steering wheel is turned after the vehicle is turned off, causing the car's computer to assume a theft attempt and automatically activate the anti-theft function. The solution is to press the one-button start once, then step on the brake, turn the steering wheel, and press the one-button start again.
12
4
Share

Does the Teana require matching when replacing the steering gear?

Replacing the steering gear in a Teana requires rematching. For any motor vehicle, if the steering gear is replaced, it needs to be rematched with the vehicle's computer. Precautions when replacing the steering gear: When replacing the steering gear assembly, it is important to align it correctly with the steering wheel's position during installation. Otherwise, it may result in an unequal number of turns when steering left and right. Components of the steering gear: The automotive steering system mainly consists of the steering wheel assembly, steering column assembly, rack and pinion power steering gear and tie rod assembly, power steering (hydraulic or electric) system, and wheel assembly. Function of the steering gear: The driver uses a specialized mechanism to make the wheels on the steering axle deviate from the vehicle's longitudinal axis by a certain angle.
16
4
Share

What is the reason for slight shaking when stepping on the brake in D gear?

Possible reasons include: aging of engine or transmission mounts, gear engagement impact in the transmission, or improper engine air-fuel mixture matching. Below is an analysis of the causes of car shaking: 1. Engine or transmission mounts, commonly known as engine mounts, may be affected by aging or improper installation. Further inspection is needed to confirm whether replacement is required; 2. Gear engagement impact in the transmission, caused by impurities or dirt in the transmission fluid, leading to poor performance of the transmission hydraulic system. Further inspection of the transmission fluid and transmission components is necessary; 3. Improper engine air-fuel mixture matching, such as poor engine performance, issues with spark plugs, fuel injectors, etc., requires further inspection to confirm the cause of the fault.
5
5
Share

Does Bentley Have Sports Cars?

Bentley does have sports cars, and its sports car model is the Bentley Continental, a front-engine, all-wheel-drive, 2-door, 4-seater sports car. There are currently 11 models of the Bentley Continental available for sale, all of which meet the China VI emission standards. The body dimensions are 4850mm in length, 1954mm in width, and 1399mm in height, with a wheelbase of 2851mm. In terms of power, the Bentley Continental is equipped with 4.0T and 6.0T engines. The 4.0T engine delivers a maximum output of 388 kilowatts and a maximum torque of 680 Newton-meters, while the 6.0T engine produces a maximum output of 467 kilowatts and a maximum torque of 900 Newton-meters. Both engine versions are paired with either an 8-speed dual-clutch transmission or an 8-speed automatic transmission.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.