Where is the cigarette lighter socket in the Civic?

2 Answers
DeCharlotte
07/24/25 12:21am
The cigarette lighter socket in the Civic is located below the center console, to the right of the driver. The cigarette lighter only operates when the ignition switch is turned on. Improper use may cause serious injury or fire. The cigarette lighter is a standard component in all vehicles, providing a convenient ignition source for smokers. In terms of space, the Civic performs well, with ample legroom in both front and rear seats. The front seats offer generous headroom, while the rear seats have slightly limited headroom. The central floor hump in the rear is not very pronounced, enhancing practicality. The storage compartments are functional, and the trunk space has been improved compared to older models.
Was this review help?
16
2
Share
LucyLynn
08/10/25 8:07pm
In the Civic, the cigarette lighter socket is actually quite easy to find. I've been driving this car for several years, and it's usually located near the front center console area. Specifically, it's in the small compartment between the driver's and front passenger's seats, close to the cup holders. If you look around, there's a small hole under the center console—that's where the socket is. I use it for plugging in a car charger, which is super handy when using my phone for navigation. If you can't find it right away, just glance down at the bottom of the center console; sometimes it might be hidden under a trim panel. Remember to use it only after starting the car to avoid draining the battery. Here's a little tip: don't plug things in too forcefully to prevent loosening or short circuits. When you're in a hurry on a night drive, this socket is really practical, though in older models the position might be slightly higher and take some getting used to. Overall, the design is user-friendly, and you can usually spot it as soon as you get in.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

What Should You Pay Attention to When Driving?

When driving, you should develop the habit of fastening your seat belt when getting into the car; ensure the doors are securely closed while driving; and pay attention to slowing down. Below are some relevant points to note when driving: Develop the habit of fastening your seat belt: The importance of seat belts for driving safety is self-evident. Always fasten your seat belt when entering the car. However, some people feel that seat belts restrict their movement space or find them uncomfortable and choose not to wear them. Such behavior must be firmly resisted. Ensure the car doors are securely closed while driving: For female drivers, it is not uncommon for doors to not be closed tightly. Since female drivers may use less force when closing doors compared to male drivers, sometimes the doors may not be securely shut. In the event of an accident, a loosely closed door could lead to fatal consequences. If you are unsure whether the door is securely closed, do not hesitate to open it and close it again firmly. For vehicles equipped with a door ajar warning function, pay attention to whether there is an alarm sound or if a warning light is illuminated on the dashboard. Slow down when passing through intersections between main roads and auxiliary roads: When passing through intersections like those between main roads and auxiliary roads, if you cannot ensure whether a vehicle is approaching from the intersection, always reduce your speed, proceed slowly, and be prepared to brake in an emergency. When merging from an auxiliary road into a main road, the driver's view may be obstructed on both sides, making it difficult to clearly assess the traffic situation from all directions. If you fail to notice an oncoming vehicle from the side in time while merging into the main road, it can easily lead to an accident.
18
0
Share

Where to Add Windshield Wiper Fluid in a Car?

Windshield wiper fluid is refilled under the hood of the car. Simply open the hood to access the refill location. Additional information about windshield wiper fluid is as follows: 1. Wiper fluid is a super-concentrated automotive glass cleaner that is non-sticky, anti-static, anti-corrosive, dustproof, freeze-resistant, acid rain-resistant, and UV-resistant. It helps maintain the gloss and lubrication of rubber and plastic materials, preventing hardening and cracking. 2. Wiper fluid quickly removes stubborn dirt, oil stains, and rainwater from the windshield, forming a protective film that prevents dust and oil from adhering. This ensures smoother and quieter wiper operation, providing a cleaner and more comfortable driving experience while maintaining a clear and bright driving view.
12
4
Share

Where is the motorcycle kill switch located?

Motorcycle kill switch is the red button on the throttle grip. Here's some knowledge about motorcycle kill switch: 1. Usage timing: When temporarily stopping (such as waiting at traffic lights), turn off the kill switch and the engine will stop running; when starting off, turn on this switch to start the engine. 2. Function: Dual control of engine shutdown. Both the kill switch and ignition key switch can stop the engine operation. If either mechanism fails or is damaged, you can use either one to shut down the engine. Maintain vehicle lighting. The kill switch only controls the engine's electrical system. If the vehicle needs to turn off the engine without turning off the lights, simply turn off the kill switch.
5
3
Share

Solutions for Steering Wheel Not Returning from Full Lock Position

Solutions for steering wheel not returning from full lock position are as follows: 1. Remember the number of turns from full lock to the center position, then turn the wheel back to center to straighten it. 2. If manual adjustment fails to return the steering wheel to center, the vehicle should be towed to a 4S shop for a four-wheel alignment service. Reasons for steering wheel failing to return to center: 1. Damaged steering gear or excessively tight steering gear bolts. 2. Low tire pressure, incorrect front wheel alignment or improper camber angle. 3. Poor lubrication between kingpin and bushings. 4. Insufficient or leaking power steering fluid in the steering system. 5. Damaged suspension bushings causing severe inner tire wear.
10
0
Share

What is the official explanation for the odor in the Ford Focus?

The causes of the odor in the Ford Focus include debris accumulation, chemical product emissions, and poor-quality plastic releasing unpleasant smells. Below are detailed explanations for the reasons behind the odor in the Ford Focus: 1. Debris accumulation: If debris accumulates in the car and is not cleaned for a long time, it will emit an odor. 2. Chemical product emissions: Chemical products release harmful gases such as formaldehyde and benzene, leading to air pollution inside the vehicle. For example, most consumers decorate their cars after purchase, which inevitably involves the use of chemical products like softeners and adhesives. These products are also one of the sources of the odor in the car. 3. Poor-quality plastic: After exposure to high temperatures, poor-quality plastic emits unpleasant odors.
7
5
Share

How to Quickly Remove Black Spots from a White Car?

Methods for removing black spots from a white car are as follows: 1. If the black spots are asphalt attached to the car paint, they can be cleaned using a tar remover. Remember to wear gloves when using the tar remover. 2. If the black spots are substances like bird droppings, they can be soaked with car wash liquid or glass cleaner and then easily removed after softening. 3. If the black spots on the white car paint are dense iron particles, none of the above cleaners will work. Only specialized clay bars or detailing clay can be used to slowly grind them off after washing the car. Excessive use of clay bars or detailing clay may cause the paint to lose its gloss or become dull, so it is advisable to apply a layer of wax to the car body after use.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.