Where is the cigarette lighter fuse located in the Roewe RX5?

What are the common faults of Punch CVT transmission?

Common faults of Punch CVT transmission are as follows: 1. Abnormal oil pressure: Abnormal oil pressure can cause shaking and abnormal noise during acceleration, mainly due to insufficient or excessive oil pressure causing chain damage or slippage. Due to abnormal lock-up oil circuit of the torque converter, the engagement and release of the lock-up clutch malfunction. Due to abnormal oil pressure of the forward clutch, its engagement and release malfunction. During maintenance, check the oil pressure of the main oil circuit, lock-up release oil pressure, forward clutch oil pressure, and primary/secondary chain wheel oil pressure. 2. Insufficient oil volume: For CVT transmissions, when the oil temperature reaches 65°C, the transmission oil starts flowing to the radiator, at which time the fluid level in the oil pan will significantly decrease. An excessively low fluid level can cause chain slippage and abnormal noise during acceleration, ultimately damaging the transmission. 3. Bearing failure: This is a common cause of transmission noise. Even with normal oil pressure and volume, abnormal noise may occur during acceleration due to bearing failure. If the noise increases with engine speed, it indicates failure of the primary chain wheel bearing. If the noise does not change with engine speed, it indicates failure of the secondary chain wheel or final drive bearing. Sometimes the noise may also be accompanied by excessively low oil pressure in the secondary chain wheel, because the failed bearing causes the shaft to deviate from the center and damages the input oil seal of the chain wheel. 4. Engine speed fluctuation at idle or engine stalling when shifting into gear: In this case, check the oil pressure of the forward clutch, radiator flow rate, and lock-up engagement and release oil pressure.

19

5

Share

Can the BMW 750li Audio System Be Used After Removal?

The BMW 750li audio system can be used after removal. Car Audio System: Car audio (auto-audio) refers to the sound playback device installed to alleviate the monotony of driving and traveling for drivers and passengers. The earliest version used was the car AM radio, later evolving to AM/FM radios, cassette players, and further developing into CD players compatible with DCC and DAT digital audio formats. Technologies in Car Audio: There are five key aspects to consider in car audio technology: installation dimensions and techniques, the audio system's vibration isolation technology, sound quality processing technology, anti-interference technology, and the active noise cancellation technology recently applied in the automotive field.

14

1

Share

How to Control the Vehicle Speed in Subject 2?

1 Wrong shoes: Do not wear slippers, platform shoes, or thick-soled shoes during training. These shoes either have soles that are too hard or thick, or they don't fit well, making it difficult to sense the tightness of the clutch pedal and hindering the ability to feel the semi-engaged position, which can easily lead to failure. Sports shoes are recommended, and canvas shoes or sneakers are also acceptable. However, pay special attention to ensuring the sole is slightly hard, as this allows for more precise control of the clutch. 2 Incorrect clutch pedal posture: The correct posture should be to press the pedal with the ball of the foot while keeping the heel on the ground. This makes it easier to move the feet and provides more strength when pressing the clutch. 3 Excessive clutch adjustment: Beginners often encounter this issue during Subject 2 practice: when the vehicle speed is out of control, they tend to panic, leading to either pressing or releasing the clutch too abruptly or driving while pressing the brake. The solution, of course, is to focus on controlling the speed steadily—neither too fast nor too slow. 4 Poor coordination between hands and feet: Many learners are not incapable of pressing the clutch but struggle to simultaneously observe reference points, turn the steering wheel, and adjust the clutch, leading to confusion when coordinating eyes, hands, and feet. There is no shortcut for this; practice is the only way to improve, as practice makes perfect.

5

1

Share

What does GWM mean?

GWM of Great Wall Motors is: the abbreviation of the English name. The full English name of Great Wall Motor Company Limited is Great-Wall-Motor-Company-Limited. Detailed introduction about Great Wall Motors: 1. Introduction: Great Wall Motors is a Chinese automobile brand established in 1984, headquartered in Baoding City, Hebei Province, mainly producing SUVs, sedans, pickup trucks, and new energy vehicles. 2. Subsidiary brands: Great Wall Motors has five vehicle brands under its umbrella: Haval, WEY (Wei Pai), ORA, Tank, and Great Wall Pickup.

15

0

Share

What Maintenance Does a 40,000 km Car Need?

Here are the maintenance items required for a car that has traveled 40,000 kilometers: 1. Engine oil (lubricant)/oil filter: For normal models, replacement is mandatory every 5,000 kilometers or six months. If full synthetic oil is used, it can be replaced every 8,000 kilometers at most. If the car hasn't reached 5,000 kilometers, the oil and oil filter should be replaced at least every six months. 2. Replace the air filter and cabin air filter: The air filter and cabin air filter should be replaced every 20,000 kilometers or two years. In regions with poor climate conditions or high dust levels, this interval should be shortened to one year. 3. Replace the fuel filter, brake fluid, and transmission oil: Taking Japanese and Korean models with shorter maintenance cycles as an example, a "major maintenance" is required every 40,000 kilometers. In addition to the parts mentioned above, the fuel filter and brake fluid must also be replaced. For automatic transmission models, the transmission oil should also be replaced. For rear-wheel-drive vehicles, the differential oil should be replaced as well. 4. Tires: Consider replacing tires older than four years, even if the tread wear isn't severe. For long-distance driving, be aware of tire aging. If the brake pads have been replaced three times, the brake discs should also be considered for replacement. 5. Battery: A car battery should typically be replaced every two years, and most cars cover around 40,000 kilometers in two years. Even if the mileage is under 40,000 km, it's advisable to check whether the battery is depleted, as a sudden failure to start the car can be highly inconvenient.

2

1

Share

What are the functions of the three buttons on a Mercedes-Benz key?

Mercedes-Benz keys have three buttons: unlock, lock, and open trunk. Unlock button: Pressing the unlock button once only opens the driver's door; pressing it twice unlocks all four doors. Lock button: This button is also commonly used. Pressing it locks all four doors, and it has a hidden small feature—remote window closing. Sometimes after turning off the engine and parking, you may realize you forgot to close the windows or sunroof. In this case, simply hold down the lock button on the remote key to remotely close all four windows and the sunroof. Trunk opening button: There is a button on the car key to open the trunk. You can hold down the trunk unlock button (some cars require pressing it twice), and the trunk will automatically pop open. Some vehicles, when the key is within range, allow you to open the trunk by simply making a lifting motion with your foot under the rear bumper.

6

3

Share

Where is the cigarette lighter fuse located in the Roewe RX5?

What are the common faults of Punch CVT transmission?

Can the BMW 750li Audio System Be Used After Removal?

How to Control the Vehicle Speed in Subject 2?

What does GWM mean?

What Maintenance Does a 40,000 km Car Need?

What are the functions of the three buttons on a Mercedes-Benz key?

What does CLK on a car mean?

How many kilometers can a Honda 190 run on a full tank of gas?

Where is the Buick seat heating switch located?

What is the fuel tank capacity of the Mercedes-Benz GLE?