How to reset the maintenance light on a Haval H6 after servicing?

[ColtonRose]

The function of the maintenance light is to record the mileage of some important components, serving as a reminder for car owners and maintenance personnel. After car maintenance, it is essential to reset the maintenance light; otherwise, the owner cannot accurately track the usage time of new components during the next replacement. The steps to reset the maintenance light on a Haval H6 are as follows: 1. Turn off the ignition switch; 2. Press and hold the "single reset" button on the combination instrument panel; 3. Turn on the ignition switch; 4. The odometer display will begin a countdown until it shows 0000.0, then release the button; 5. The maintenance reminder light on the dashboard will turn off.

[McReagan]

Clearing the maintenance light on a Haval H6 is quite simple, and here's how I did it: Turn the key to the ON position without starting the engine, allowing the dashboard to light up. Then press and hold the TRIP button on the steering wheel for about 10 to 15 seconds until the setup menu pops up on the screen. Select the maintenance reset or a similar option to confirm. Remember to perform the steps continuously without interruption to avoid accidentally entering other menus. I tried it once after my last maintenance, and it worked—the light went off, saving me a trip to the repair shop. A quick reminder: This operation should be done every 6 months or 5,000 kilometers after maintenance; otherwise, the system will keep reminding you, potentially causing you to overlook actual maintenance needs. If the operation fails, it might be due to poor button contact or unsaved settings—try restarting the car and repeating the steps. If unsure, it's best to visit an authorized Haval service center for free assistance. Keeping up with this routine helps extend the vehicle's lifespan and reduces potential risks.

[AxelFitz]

I just dealt with the Haval H6 maintenance light issue: Turn the ignition switch to the ON position, all dashboard indicator lights will illuminate without starting the engine, then press and hold the TRIP button for about 15 seconds. A menu will appear on the screen. Select the maintenance reset option and confirm to complete the process. Be patient throughout the procedure; releasing the button too quickly may cause no response. I once encountered an unresponsive button—gently pressing it a few more times or checking the connections solved the problem. This method is generally applicable to most Haval models, saving money and hassle by doing it yourself. If it still doesn’t work, contact a 4S dealership to have them reset it easily with professional tools. Remember to confirm the light is off after resetting to ensure success, and the maintenance interval will return to normal for safer driving.

[LawsonAnn]

Reset the maintenance light for Haval H6: Turn the key to ON position without starting the engine, press and hold the TRIP button on the dashboard for about 10 seconds until the menu pops up, then select reset maintenance. I often do this for my family car—quick and simple, avoiding extra costs. If it fails, try repeating the steps or refer to the manual for alternative methods. It's recommended to handle this promptly after maintenance.

[OJameson]

The method to clear the maintenance light in the Haval H6 is not difficult: turn the key to the ON position where all lights illuminate but do not start the engine, then press and hold the TRIP button on the dashboard for about 15 seconds. After the system enters the setup mode, select reset maintenance to confirm and turn off the indicator light. I have used this trick multiple times myself, easily solving the problem and saving a trip to the shop. A little tip: if the button doesn't respond, it might be due to dust interference or settings not being saved properly. Clean it and try again for success. After resetting, the system reminder cycle normalizes to improve accuracy, ensuring timely maintenance and care for the vehicle.

[McMila]

My experience with the Haval H6 is: After turning the key to the ON position, hold the TRIP button for about ten seconds until the menu appears, then select the maintenance reset to complete the light elimination. Be steady and don't rush during the operation, and verify that the light is off after completion. I once followed an online tutorial and it worked perfectly—saving money, convenient, and learning a new trick. Doing it regularly ensures accurate reminders, so don't let the light interfere with safe driving judgment.