Where is the cigarette lighter fuse located in the Hongqi HS5?

1 Answers
CassidyFitz
07/30/25 8:23am
The cigarette lighter fuse in the Hongqi HS5 is positioned above the two cup holders. Insert the cigarette lighter into the socket and press the handle to activate instant heating. Pay attention to the interface of the cigarette lighter, as some cigarette lighter sockets feature USB ports, some have traditional cigarette lighter interfaces, and others come with household electrical outlets. The Hongqi HS5 is positioned as a midsize SUV, with body dimensions of 4760mm in length, 1907mm in width, and 1700mm in height, along with a wheelbase of 2870mm. In terms of power, this vehicle is equipped with a 2.0T turbocharged engine, delivering a maximum power of 224 horsepower and a peak torque of 340 Nm. The engine is paired with a 6-speed automatic transmission in the drivetrain system.
Was this review help?
15
3
Share
More Forum Discussions

What Are the Solutions for a Chevrolet Car That Won't Start?

The solutions for a Chevrolet car that won't start are: 1. Check if the battery is low on charge and recharge it; 2. Repair or replace a damaged fuel pump promptly; 3. Check if there is sufficient fuel and add more if needed; 4. Inspect the engine sensors for damage; 5. Replace spark plugs and ignition coils; 6. Use a heating rod to warm up the engine oil. Chevrolet models include the Chevrolet Equinox, Chevrolet Cavalier, Chevrolet Orlando, Chevrolet Trailblazer, Chevrolet Cruze, etc. Taking the 2021 Chevrolet Equinox as an example, it is a mid-size SUV with body dimensions of length 4646mm, width 1843mm, height 1684mm, and a wheelbase of 2725mm.
18
1
Share

How to Permanently Disable the Auto Start-Stop Function in Mazda?

The method to permanently disable the auto start-stop function in Mazda is: Press and hold the i-stop button for more than 2 seconds to toggle the function on or off. The i-stop button is located on the lower left panel of the steering wheel. When i-stop is disabled, the dashboard will display the i-stop indicator in orange. Taking the 2015 Mazda6 as an example, it is a mid-size car with body dimensions of 4670mm in length, 1780mm in width, and 1435mm in height, with a wheelbase of 2675mm. The 2015 Mazda6 is equipped with a 2.0L inline 4-cylinder naturally aspirated engine, delivering a maximum horsepower of 147PS, a maximum torque of 183Nm, and a maximum power of 108kW, paired with a 6-speed manual transmission.
10
4
Share

What is the Chinese equivalent of Euro III standards?

Euro III standards are equivalent to China's National III standards. In the Euro III emission standards, the limits for hydrocarbons, carbon monoxide, nitrogen oxides, and particulate matter in commercial vehicle exhaust are 0.66%, 2.1%, 5%, and 0.1%, respectively. The European standards are implemented through the emission regulations of the United Nations Economic Commission for Europe and the current EU emission directives. China's National III standard is the third phase of China's vehicle emission standards, equivalent to the Euro III emission standard, meaning the exhaust pollutant levels are comparable to Euro III. The difference is that new vehicles must be equipped with an OBD (On-Board Diagnostics) system.
4
2
Share

What Does Double Flashing Mean?

Double flashing refers to the hazard warning lights, which serve as signal lights to alert vehicles and pedestrians that the vehicle is experiencing a special situation. Its location is the red triangle button on the central control panel inside the car. Situations where hazard warning lights should be used: 1. When the vehicle breaks down or is involved in a traffic accident on the road; 2. When parking on the roadside; 3. When driving in foggy weather; 4. When towing a faulty motor vehicle, both the towing vehicle and the faulty vehicle should turn on the hazard warning lights; 5. When temporarily stopping on the driving road; 6. When visibility is less than 100m; 7. When transporting critically ill patients; 8. When the vehicle is reversing or making a U-turn on a complex road section.
15
5
Share

What checks should be performed on the vehicle condition before driving?

Before driving, the following checks should be performed on the vehicle condition: 1. Before entering the cabin, check the surrounding environment for any obstacles or hazards, inspect whether the tire pressure is normal, look for any external damage, and check for any liquid leaks on the ground; 2. After entering the cabin, close the door properly, adjust the seat position and the angle of the interior and exterior rearview mirrors, and fasten the seatbelt; 3. Check if the handbrake is engaged, shift into neutral (for automatic transmissions, press the brake and shift into P or N gear), turn on the ignition switch, check if the dashboard indicator lights illuminate, and finally start the engine; 4. Lightly press the brake pedal a few times to check if the braking system is functioning properly.
17
4
Share

How to Check the Oil Dipstick on a Jeep Renegade?

To check the oil dipstick on a Jeep Renegade, follow these steps: Do not check the oil while the engine is running. Park the vehicle securely, engage the parking brake, and start the engine. Once the engine reaches normal operating temperature, turn it off and wait a few minutes to allow the oil to drain back into the oil pan. Then, remove the dipstick, wipe it clean, reinsert it, and remove it again to check the oil level. Taking the 2021 Jeep Renegade as an example, it features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 1.3L turbocharged engine that delivers a maximum horsepower of 173 PS, a maximum power of 127 kW, and a maximum torque of 270 Nm, paired with a 7-speed dual-clutch transmission.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.