
At the lock latch of the rear doors. After pushing the button downward, the child lock is activated, and then when the door is closed, it cannot be opened from the inside, only from the outside. Below is an introduction to the Crown: 1. There are currently 5 models of the Crown on sale, with 1 type of displacement (2.0T) and 1 type of transmission (automatic manual). The engine has a maximum power of 173.0kW, a maximum horsepower of 235PS, and a maximum torque of 350.0N·m. The Crown's positioning has become younger, more fashionable, and sporty, completely overturning the previous 'elegant' impression in people's minds. An additional chrome trim on the side of the body adds a touch of trendiness to the dynamic body on the basis of its noble appearance. At the rear, the Crown adopts an exposed dual-exhaust layout, making the visual effect more sporty and youthful. 2. In terms of interior, the Crown's interior lights have been upgraded to , and the wood grain decorations on the center console and door armrests have also been adjusted, highlighting the car's premium feel and technological sophistication. 3. In terms of configuration, the sport version adds a 360-degree panoramic image, and the rims have been upgraded from 17 inches to 18 inches.

As a parent who frequently transports children, my experience with finding the child lock on the Crown is that it's located in the side corner of the rear door. Specifically, when you open the rear door, you'll see a small toggle switch or lever on the edge of the door frame, usually marked with an arrow icon. A gentle flick with your hand will activate the child lock function. After setting it up, test to ensure the door cannot be opened from the inside to confirm success. Safety is extremely important, especially with mischievous kids in the car, as accidental door openings can lead to accidents. Therefore, always check if the lock is engaged before every trip. Additionally, the Toyota Crown's child lock is mechanically designed, making it simple and easy to operate without affecting the ability to open the door from the outside. Regular maintenance is also essential—for instance, if the door lock mechanism occasionally gets stuck, a quick spray of lubricant to clean it will suffice. The manual includes detailed diagrams of its location, so refer to it if you're unsure.

As a car enthusiast who enjoys tinkering with my own vehicle, I once manually installed child locks on my Crown. The locks are actually located at the bottom or side frame of the rear door. Open the rear door and carefully inspect the edge—you'll find a small switch resembling a tiny lever. Simply use your hand to flip it to the locked position; no tools are needed at all. Test the inner door handle to confirm if it's deactivated. DIY repairs like this are quite simple and save the hassle of hiring a mechanic. Similar devices on other cars are often placed near the door lock mechanism, operating on the principle of mechanical linkage to prevent children from tampering with the door handle. During routine car maintenance, remember to check if the locks move smoothly. Blow away any dust to avoid interference. Overall, Toyota's design is quite thoughtful—the location is intuitive and easy to find.

I just started learning to drive and was a bit confused about finding the child lock on the Crown. It turns out you need to open the rear door, and on the inner edge of the door, you'll see a small switch or marking that can be toggled. Simply slide it in the direction indicated, and the child lock will be activated, preventing the door from being opened from inside. The method is super simple—beginners don’t need to worry, as it takes just a minute or two to set up. The key point is that it prevents accidents, especially since kids in the back seat can be very curious. It’s too dangerous if they pull the door handle while driving. I recommend testing the setup before hitting the road to ensure everything is safe. The manual or online images can also help locate it.

From the perspective of automotive safety mechanisms, the Crown's child lock is designed next to the rear door's locking mechanism. Upon opening the rear door, a small toggle switch can be found on the edge of the door frame. Manually flipping this switch locks the interior door-opening function. The core principle involves mechanically blocking the connection to the door handle to prevent children from tampering with it. The position is discreet yet easy to locate, demonstrating the engineers' thorough consideration. Always test the functionality before closing the door after operation. Compared to electronic systems, mechanical locks are more reliable and less prone to failure. Occasional maintenance, such as applying lubricant to remove dust, helps maintain smooth operation. Prioritizing driving safety, activating this feature can significantly reduce distraction risks.

I once helped a buddy with the child lock on his Crown. It's located on the side of the rear door—just open the door and you'll see a small toggle switch at the bottom edge. Push it to the 'lock' position, and it takes effect immediately. Remember to test that the door can't be opened from the inside after setting it. Personally, I find the setup quick and convenient, and my friends handle similar situations the same way. Practical tip: Always check the lock before driving off, otherwise, kids fiddling with the door could be dangerous; refer to the manual's diagram to confirm the exact location details.


