···
Log in / Register

Where is the central locking system located in Chery cars?

6Answers
Giselle
07/28/2025, 12:16:28 PM

The control box for the central locking system in Chery cars is located under the left side of the rear seats. Upon careful observation beneath the rear seats, you can see the control box. Introduction to Chery's central locking system: The central locking system in cars is a switch button located next to the driver's seat. When the driver presses it, they can control the door locks of the other three doors alone, or conversely, allow each door to be controlled independently. This "central door lock" control device, as a control mechanism, may also experience malfunctions, with a common issue being the failure of the central lock, resulting in the inability to lock the doors. There are many types of central locking systems in Chery cars, but the basic components mainly include the door lock switch, door lock actuator, and door lock controller, which can meet the driver's daily driving needs. Functions of Chery's central locking system: When the driver locks the door next to them, the other doors are simultaneously locked. The driver can open all doors at once via the door lock switch or open a single door individually. It allows for remote locking and unlocking without inserting the key into the lock. When the vehicle reaches a certain speed, all doors automatically lock to prevent passengers from accidentally opening the doors by operating the door handles. In addition to the driver's side door, other doors are equipped with separate spring lock switches that can independently control the opening and locking of a single door.

Was this review help?
113
Share
KyleMarie
08/11/2025, 04:31:19 PM

On Chery cars, the central locking system is quite conveniently positioned, and I often drive my beloved car. It's usually located on the driver's side door panel, right near the door handle, featuring a small button or toggle. A gentle press locks or unlocks all doors. I find Chery's layout very practical—it's within easy reach while driving without compromising safety. If you can't locate it, try using the remote key fob; closer proximity yields better results. Regular maintenance should include cleaning that area, as dust buildup might affect the button's responsiveness. Remember, if the central lock malfunctions, it could be due to wiring issues or sensor failure—don't overlook this. It's best to check the diagram in the user manual or consult a 4S店 directly.

Was this review help?
13
Share
Expand All
FelicityLynn
09/29/2025, 02:46:48 AM

I have extensive experience with the central locking system positioning in Chery vehicles. Typically located on the inner side of the driver's door panel, adjacent to the window control buttons, some models may position it below the dashboard on the center console. Operation is straightforward - a simple press controls the entire door system. From a maintenance perspective, the placement prioritizes driver accessibility to minimize driving distractions. If malfunctions occur, first check fuses or key fob batteries, as aged wiring frequently causes failures. Owners are advised to regularly test button responsiveness and address issues promptly to prevent mid-journey locking malfunctions. These details significantly enhance driving convenience and safety.

Was this review help?
16
Share
Expand All
VanJasmine
11/12/2025, 03:41:32 AM

I've driven a Chery car before, and the central locking is located on the door panel on the left side of the driver's seat, at a clearly marked small button. Pressing it locks the car with one touch, which is super convenient. The key also has a remote control function, making remote operation even more flexible. If you can't remember the position, you can slowly feel around the door trim area inside the car to find it. The position is designed to be very ergonomic and won't cause any delays. If you occasionally encounter issues, try cleaning the button or using the mobile app to assist in locating the model's position. Simple maintenance will keep it working well.

Was this review help?
13
Share
Expand All
RiverLee
01/02/2026, 10:34:07 PM

The central locking system in Chery vehicles is ergonomically positioned, and I'm familiar with this setup. It's mostly located in the upper-middle section of the main driver's door handle for easy operation while driving. The placement is designed to minimize movement, allowing drivers to focus on the road. For example, in the Chery Tiggo series, the button is typically situated next to the door handle, with a moderate size. From a safety perspective, this design prevents accidental activation during driving. Regular checks on button responsiveness and wiring connections are crucial to prevent malfunctions caused by dust accumulation. If modified, the position might change, so it's important to ensure the original factory settings are secure.

Was this review help?
3
Share
Expand All
LaHazel
03/30/2026, 11:17:31 PM

In Chery cars, the central locking system is typically located on the front part of the driver's side door panel, with clearly marked buttons for easy access. Having driven one for several years, I find this position ideal for quick response—just a press to control the doors. It's important to keep the buttons clean, as excessive dirt may cause poor contact. The placement is also secure, designed close to the driver to prevent accidental operation. In case of malfunction, first check if the key remote is the issue. Promptly visit a professional workshop for inspection and maintenance to ensure smooth daily driving.

Was this review help?
9
Share
Expand All
More Q&A

What Causes the Malfunction Light to Stay On in an EFI Motorcycle?

When the malfunction light stays on in an EFI motorcycle, it indicates an issue with the electronic control system, often related to the electrical circuit. You can ride the motorcycle to a repair shop to have it checked. The fault code should be retrieved, and based on this code, the cause can be identified. If there is a fault, it should be repaired accordingly; if not, the light can simply be turned off. Common warning lights in EFI motorcycles and their meanings: Low Coolant Level Warning Light: Indicates that the coolant level is too low and needs to be refilled. TCS Control System Warning Light: Indicates a fault in the traction control system. Transmission Overheat Warning Light: Indicates that the transmission temperature is too high and needs cooling. Drivetrain Warning Light: Indicates a fault in the drivetrain. Types of EFI Motorcycles: Closed-Loop System: The functionality and operation of closed-loop EFI motorcycles are essentially the same as those in cars. Closed-loop EFI motorcycles can adjust the fuel injection amount based on the oxygen content in the exhaust and can also change the intake pressure according to external atmospheric pressure changes. Most domestically produced EFI motorcycles on the market are open-loop systems. Open-Loop System: Open-loop EFI motorcycles have largely been phased out due to their inability to meet high environmental standards.
106
Share

What does 'ramp' mean?

Ramp, also known as an approach, refers to the section of road that connects the upper and lower roads of an overpass or elevated road, as well as the section that connects the highway with adjacent auxiliary roads. Below are definitions of various types of ramps: 1. Entrance and exit ramps: These are auxiliary connecting sections for entering and exiting the main road, also known as approaches. In engineering terms, they typically refer to a short section that provides vehicles with access to the main road and adjacent auxiliary roads, or other main roads via bridges/slopes/connecting roads, as well as collector-distributor roads. They are a major component of road interchange construction. 2. Up and down ramps: These are auxiliary connecting slopes for entering and exiting elevated roads, moving upwards or downwards, usually referred to as 'interchange ramps.' Note: The above two types (items 1 and 2) often incorporate the design of collector-distributor roads. 3. Direct ramp: Places the left-turn lane on the left side. 4. Indirect ramp: Places the left-turn lane on the right side, using a loop to connect with other highways. 5. Semi-direct ramp: Similar to an indirect ramp but does not use a loop; instead, it uses a longer, more undulating elevated road as the connecting ramp.
117
Share

What are the differences between BYD Song DM-i 51 and 110?

BYD Song DM-i 51 and 110 have the following differences: Range: The 51 version has a shorter range, while the 110 version has a longer range. If charging is convenient, choose the 51 version; if not, opt for the older 110 version for more economical commuting. Price difference: The 110 version is slightly more expensive than the 51 version. Excluding the charging station included with the 110 version, the price difference between the vehicles themselves is significant. This price difference would take driving approximately 5 kilometers to offset. Power difference: The 110 version has a larger motor and higher torque compared to the 51 version.
105
Share

Difference Between Song DM and DMi

BYD Song DM and DMi differ in the following aspects: 1. Power difference: Although both are plug-in hybrid systems, their engine displacements are different. Both are equipped with turbocharged engines, but the DM model features a 2.0T engine with a maximum power of 192 horsepower and a maximum torque of 320Nm, while the DMi is equipped with a smaller 1.5T engine delivering a maximum power of 139 horsepower and a maximum torque of 231Nm. 2. Motor difference: Besides the engine, their motors also differ. Although both use permanent magnet synchronous motors, the DMi series all come with a front-mounted single motor, available in two versions: 145kw and 160kw. In contrast, the DM series includes not only a rear-mounted single motor version with 180kw but also two models with front + rear dual motors. Therefore, all DM models are four-wheel drive, with two capable of full electric four-wheel drive, while the DMi models are all two-wheel drive.
105
Share

Does a Car Consume Fuel When Started but Not Moving?

Starting the car without moving does consume fuel. Here are the relevant details: 1. Prolonged idling can damage the engine: Although it consumes less fuel than driving, prolonged idling can harm the car's engine. 2. Prolonged idling can cause carbon buildup in the engine: Starting the car without moving means the engine is idling. Idling refers to the engine running without load, typically at 550-800 RPM. If the car idles for too long, it can lead to carbon buildup in the engine. 3. Idling speed should be controlled appropriately: Both high and low idle speeds are undesirable. A high idle speed can increase fuel consumption, raise the engine's internal temperature, accelerate engine wear, and reduce its lifespan. Conversely, prolonged low idle speed can cause the car to stall.
114
Share

What is the top speed of the Volkswagen Scirocco?

Volkswagen Scirocco has a top speed of 240 km/h. Here is some related knowledge about speed: Concept of vehicle speed: Vehicle speed refers to the distance a car travels per unit of time, abbreviated as speed, commonly measured in kilometers per hour or meters per second. Significance of vehicle speed: The top speed of a car increases with greater engine horsepower, and its significance lies in quickly meeting people's travel needs. Classification of vehicle speed: To adapt to different purposes, vehicle speed is mainly divided into spot speed, section speed, and design speed.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.