Where is the carbon canister located on the Venucia D50?

1 Answers
JosieFitz
09/02/25 4:32am
The specific location of the vehicle's carbon canister is between the engine and the fuel tank. If removal is necessary, it must be performed by a professional repair shop. Do not attempt to remove the carbon canister on your own to avoid affecting the normal operation of the vehicle. Below is relevant information about the vehicle's carbon canister: 1. Replacement cycle: There is no fixed replacement cycle for the vehicle's carbon canister, and the vehicle's user manual does not specify how often it should be replaced. As a vehicle owner, there is no need to replace the carbon canister unless it is damaged. 2. Actual working condition: Some 4S shops may recommend replacing the carbon canister every 40,000 to 60,000 kilometers, but this is only a conservative estimate of the canister's lifespan. Whether to replace it according to this schedule mainly depends on the actual working condition of the carbon canister. Since gasoline is a highly volatile liquid, it is stored in the vehicle's fuel tank.
Was this review help?
17
3
Share
More Forum Discussions

What are the differences between BMW X6 and X6M?

The differences between BMW X6 and X6M are: 1. Different power: The BMW X6 is equipped with a 2.0T turbocharged engine with a maximum power of 195kW; the BMW X6M is equipped with a 4.4L twin-turbocharged engine with a maximum power of 441kW. 2. Different tires: The BMW X6 tire models are 275/40R20 and 315/35R20; the BMW X6M tire models are 285/35R21 and 325/30R21. 3. Different body dimensions: The BMW X6 has a body length of 4947mm, width of 2004mm, height of 1698mm, and a wheelbase of 2975mm; the BMW X6M has a body length of 4941mm, width of 2019mm, height of 1699mm, and a wheelbase of 2972mm.
6
5
Share

Is the BMW 4 Series an Imported or Domestically Produced Vehicle?

BMW 4 Series is an imported vehicle. Domestically Produced BMW Models: BMW 1 Series, BMW 2 Series Tourer, BMW 3 Series, BMW 5 Series, BMW 5 Series New Energy, BMW X1, BMW X1 New Energy, BMW X3. Domestically produced BMW vehicles purchased in China are marked with "Brilliance BMW" at the rear of the car. Any BMW with "Brilliance BMW" at the rear indicates it is a domestically produced model. BMW Imported Models: BMW X5, BMW 7 Series, BMW 5 Series (Imported), BMW X6, BMW X4, BMW 6 Series GT, BMW 3 Series GT, BMW X2, BMW 4 Series, BMW 3 Series (Imported).
4
0
Share

Where is the OBD interface located in a sedan?

The OBD interface in a sedan is located in: 1. The lower left side of the dashboard; 2. Above the pedal; 3. In front of the gear shift lever. The working principle of the OBD interface is: it continuously monitors the engine's operating conditions to check if the vehicle's exhaust exceeds the standard. Once it exceeds the standard, a warning will be issued immediately. When a system failure occurs, the fault light or check engine warning light will illuminate, and the powertrain control module will store the fault information in the memory. Through a certain program, the fault code can be read from the PCM. The devices detected by the OBD interface include: engine, catalytic converter, particulate trap, oxygen sensor, emission control system, fuel system, EGR.
9
4
Share

Which Audi models are two-door cars?

Audi's two-door models include: Audi TT, Audi A5, Audi S5, Audi RS5, and Audi R8. Here is some related information about two-door cars: Two-door models: A two-door car refers to a vehicle that only has doors for the driver and front passenger, typically sports cars, but there are also a few non-sports cars with two doors. For example, the Audi RS5 is classified as a mid-size sedan. Two-door sports cars: Internationally, two-door sports cars are abbreviated as CA-type cars. The biggest difference between two-door sports cars and regular sedans is that they are designed for high-speed driving, often featuring powerful engines and chassis and suspension systems adapted for high-speed performance. Two-door sports cars usually have two doors and two seats.
12
4
Share

Can Paddle Shifters Be Installed After Purchase?

Paddle shifters can be installed after purchase. The function of paddle shifters: Paddle shifters are typically gear-shifting devices found in some automatic transmission vehicles. Their purpose is to allow gear changes without using the gear selector lever on the transmission, instead achieving shifts directly by pulling the paddle shifters. This feature is widely used in sports cars and coupes that emphasize performance. Advantages of paddle shifters: As a quick-shifting device, paddle shifters enhance driving operability. Usually located behind the steering wheel, they offer convenient and fast operation. Drivers only need to shift into D, S, or manual mode, and using the paddle shifters allows them to perform upshifts and downshifts without taking their hands off the steering wheel.
2
5
Share

What does the 'W' in motor oil stand for?

In motor oil, 'W' stands for Winter. The functions of motor oil are: 1. Lubrication and friction reduction; 2. Assisting in cooling and temperature reduction; 3. Sealing and leak prevention; 4. Rust and corrosion protection; 5. Shock absorption and cushioning. Classification of motor oil: 1. Conventional mineral oil; 2. Semi-synthetic oil; 3. Full synthetic oil. The method for changing motor oil is: 1. Lift the vehicle, remove the undercarriage shield, and place a container of about 10 liters under the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow into the oil filler opening for two minutes, then tighten the oil drain plug after draining and wipe it with a tissue to check for leaks; 3. Reinstall the undercarriage shield and lower the vehicle, then use a funnel to add oil through the filler opening.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.