Where is the car jack located?

1 Answers
VonAustin
07/30/25 9:10am
Generally, the support points for household cars are usually on the inner side of the side skirts. Here are the specific details about the car jack: 1. Types: A-frame structure jack, this type of rack jack has a relatively low load-bearing capacity, so it is mainly equipped on small vehicles. The diamond-shaped structure jack has a more reliable support structure compared to the A-frame jack. The screw jack relies on its own threaded structure to self-lock and support the vehicle. 2. Precautions: Secure the vehicle properly, take safety warning measures, pay attention to fixing the base of the jack, align it with the vehicle chassis support points, and placing a spare tire under the car for added safety.
Was this review help?
11
3
Share
More Forum Discussions

What does VSC mean in cars?

The VSC in cars refers to the Vehicle Stability Control system, an active safety system developed by Toyota Motor Corporation. Here is more information about the car VSC system: 1. The VSC system can monitor the driver's control actions (steering, braking, and throttle, etc.), road conditions, and the vehicle's motion status in real-time, and continuously send instructions to the engine and braking system. 2. The VSC system can actively adjust the engine throttle to control the engine speed and adjust the driving force and braking force of each wheel to correct the car's oversteer and understeer. 3. When the driver operates improperly or the road conditions are abnormal, the VSC system will warn the driver with a warning light.
18
0
Share

How to Turn on the Daytime Running Lights?

The steps to turn on the daytime running lights are as follows: 1. Press the car's brake pedal. 2. Press the car's one-touch start button. 3. The car's dashboard lights up, and the entire vehicle's power is activated. 4. Turn the headlight switch to the AUTO position to enable the automatic function of the lighting system. 5. If it is daytime, the daylight sensor will activate the daytime running lights. The LED daytime running lights installed at the front of the vehicle are designed to make the car more easily recognizable during daytime driving. The primary benefit of LED daytime running lights is not aesthetics but rather enhancing the vehicle's visibility. Studies abroad have shown that driving with headlights on can reduce vehicle accidents by 12.4% and lower the fatality rate in crashes by 26.4%. The purpose of daytime running lights is to improve traffic safety.
14
5
Share

How to Remove the Steering Gear of the Languid?

The automotive steering gear, also known as the steering mechanism or steering box, is the most critical component in a car's steering system. Its function is to amplify the force transmitted from the steering wheel to the steering linkage and to alter the direction of force transmission. The steps to remove the steering gear of the Languid are as follows: 1. First, locate the position of the disassembly mechanism. The disassembly mechanism is located on the backside of the steering wheel. 2. After turning off the engine, shut down all electrical devices. 3. Turn the steering wheel to 90 degrees; there is a hole on the backside of the steering wheel. Use an appropriate tool to touch this hole. 4. Finally, return the steering wheel to the straight position, turn it to 90 degrees in the opposite direction, and use an appropriate tool to touch another hole. At this point, the airbag assembly can be removed.
1
3
Share

Under what circumstances should hazard lights be used in a car?

Hazard lights should be turned on in the following situations: 1. When temporarily parking on the road, turn on the hazard lights to alert other vehicles. 2. In case of a breakdown or traffic accident on the road, hazard lights should be activated to warn passing vehicles for safety. On highways, if a vehicle breaks down or is involved in an accident and stops without using lights and warning signs as required, 12 points will be deducted from the driver's license. 3. When towing a faulty motor vehicle, both the towing vehicle and the towed vehicle should turn on the hazard warning lights to indicate their abnormal status. 4. When visibility is less than 100 meters, turn on fog lights, low beams, marker lights, front and rear position lights, and hazard warning lights. The speed should not exceed 40 kilometers per hour, and a distance of more than 50 meters should be maintained from the vehicle in front in the same lane. 5. In case of sudden heavy rain while driving, regardless of day or night, immediately turn on the hazard warning lights to alert passing vehicles and pedestrians for safety and attention.
16
4
Share

What is the battery specification for the Cadillac XTS?

Cadillac XTS battery specification is 12V 70Ah. The car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Below is more information about the Cadillac XTS: 1. Model: The Cadillac XTS is a mid-to-large-sized sedan under the Cadillac brand. 2. Body dimensions: The length, width, and height are 5131mm, 1852mm, and 1501mm respectively, with a wheelbase of 2837mm. 3. Powertrain: The Cadillac XTS is equipped with a 2.0-liter turbocharged engine across the lineup, delivering 269 horsepower and a maximum torque of 353 Nm. The maximum power speed is 5300 rpm, and the maximum torque speed ranges from 2000 to 5000 rpm. It is paired with a 6-speed automatic transmission.
4
2
Share

What are the power specifications of the Jetta VA3?

Jetta VA3 delivers strong and dynamic performance, equipped with the "EA211-1.5L MPI engine". Below are the detailed power specifications: 1. Power specifications: The Jetta VA3 uses a 1.5L naturally aspirated engine paired with either a 5-speed manual transmission or a 6AT transmission. This engine delivers a maximum power of 82kW and a maximum torque of 145Nm, with the maximum power achieved at 6100 rpm and the maximum torque at 4000 rpm. The engine is constructed entirely from aluminum alloy, making it lighter, with an optimized cylinder block structure for a more compact size. 2. Suspension structure: The Jetta VA3 features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. The torsion beam suspension has a simpler structure, smaller size, and occupies less space.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.