Where is the cabin air filter of the Baojun 730 located?

2 Answers
VonEdward
07/24/25 6:31am
The cabin air filter of the Baojun 730 is located inside the glove compartment on the passenger side. When replacing the cabin air filter, the glove compartment needs to be removed. Please note that the clips on the glove compartment are made of plastic and should be handled gently. The cabin air filter is an essential component of the car's air conditioning system, primarily responsible for filtering out impurities such as pollen and dust particles from the air, as well as adsorbing toxic gases like carbon monoxide or nitrogen dioxide, ensuring relatively high air quality inside the vehicle. The Baojun 730 is a 7-seater MPV produced by SAIC-GM-Wuling, with body dimensions of 4780mm in length, 1780mm in width, and 1740mm in height, and a wheelbase of 2750mm. In terms of power, it is equipped with a 1.5T turbocharged engine, paired with an 8-speed CVT transmission.
Was this review help?
17
1
Share
DiDallas
08/11/25 2:15am
I often encounter this issue when repairing cars. The air conditioning filter of the Baojun 730 is located inside the glove compartment in front of the front passenger seat. Specifically, you need to open the glove compartment door, then locate the clips or screws inside—usually positioned towards the bottom—and release them to access the filter housing. When removing the old filter, pay attention to its orientation, and install the new filter in the same way. I recommend replacing it every six months to a year, especially if you drive frequently in dusty areas where the filter is prone to clogging. Regular replacement significantly improves in-car air quality, reduces odors and bacterial buildup, and is beneficial for respiratory health. DIY replacement is cost-effective, with plenty of online tutorials available, making it ideal for budget-conscious car owners.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

Where to Add Oil to an Air Compressor?

It is located on the oil and gas tank, with the drain at the bottom and the fill in the middle. Here are some related introductions about air compressors: 1. The use of air compressor oil: Air compressor oil can reduce friction on various types of machinery, protecting mechanical parts and workpieces as a liquid lubricant, primarily serving functions such as lubrication, cooling, rust prevention, cleaning, sealing, and buffering. 2. Common types of air compressors: Common air compressors include piston air compressors, screw air compressors (which are further divided into twin-screw and single-screw air compressors), centrifugal compressors, as well as sliding vane air compressors and scroll air compressors.
1
4
Share

Is it acceptable to change fully synthetic motor oil once a year?

It is acceptable to change fully synthetic motor oil once a year. Fully synthetic motor oil appears as a clear, semi-transparent or transparent liquid with a shelf life of up to 5 years. Synthetic motor oil is chemically engineered lubricant whose composition can be adjusted according to different usage purposes. The replacement procedure for fully synthetic motor oil is as follows: 1. Start the vehicle engine for preheating; 2. Unscrew the drain plug; 3. Remove the oil filter; 4. Apply new oil to the gasket of the new filter; 5. Pour new oil into the oil pan; 6. Check for leaks at the lower part of the engine and verify oil level with dipstick before starting the engine for testing.
5
4
Share

What are the sensors in a car engine?

Automotive engine sensors include the mass air flow sensor, throttle position sensor, accelerator pedal position sensor, intake air temperature sensor, coolant temperature sensor, and camshaft position sensor, among others. These sensors are indispensable components of a vehicle. Based on their location, engine sensors are primarily categorized into crankshaft position sensors and camshaft position sensors. According to the technology applied, they are mainly classified into electromagnetic induction sensors, Hall effect sensors, and photoelectric effect sensors. Among these, the crankshaft position sensor is a crucial component in computer-controlled ignition systems. Its function is to detect top dead center signals, engine speed signals, and crankshaft angle signals, inputting these data into the computer to control the ignition sequence of cylinders and issue commands for optimal ignition timing.
13
3
Share

What to Do When the Truck's Exhaust Emission Warning Light Comes On?

Truck engine exhaust system warning light on the solution is to read the fault code to confirm the location of the fault, and then replace the damaged parts. The reasons for the engine exhaust system warning light coming on are as follows: 1. Poor quality of car gasoline: Poor fuel quality may lead to abnormal mixture ratio, electronic equipment failure, and exhaust system abnormalities. 2. Faulty electronic components in the intake system: Such as oxygen sensor, carbon canister solenoid valve, throttle, engine carbon deposits. 3. The engine control program needs to be updated or debugged: If the warning light comes on while driving, and the engine lacks power or shakes severely, it is necessary to go to a nearby repair service station for engine inspection and maintenance.
17
5
Share

What to Do When Car Keys Are Locked Inside?

The solutions for when car keys are locked inside are: 1. Use a spare key; 2. Contact a qualified and professional locksmith; 3. Call the dealership's after-sales service for assistance; 4. Use adhesive tape to pull the car window open forcibly; 5. Use a sharp object to remove the door seal and insert a wire through the gap to press the unlock button. Key maintenance methods include: 1. Avoid frequently placing keys with metal objects; 2. Do not store spare keys in the car door; 3. Prevent smart keys from dropping or colliding; 4. Keep smart keys away from high temperatures or liquid contact; 5. Avoid placing keys near electronic devices.
10
5
Share

Where to Change the Address on a Driver's License?

Go to the vehicle management office where the license was issued to make the change. Below is relevant information: 1. Relevant laws: Article 10 of the "Motor Vehicle Registration Regulations" stipulates that registered motor vehicles must apply for change of registration at the local vehicle management office under the following circumstances: change of vehicle body color; engine replacement; replacement of the vehicle body or frame; or whole vehicle replacement due to quality issues. 2. Required materials: Original and photocopy of the owner’s ID card (for non-local residents, original and photocopy of the temporary residence permit are required); proof of engine replacement; engine number imprint (for imported engines, provide the import customs declaration with the engine number imprint); vehicle information change application form; vehicle registration certificate and driver's license.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.