Where is the cabin air filter of JINGYI X3 located?

1 Answers
AlexandraRose
07/30/25 6:23am
JINGYI X3's cabin air filter is located in the engine compartment, directly above the engine and below the windshield wipers. More information about JINGYI X3 is as follows: 1. Positioned as China's "first enlarged wide-body SUV", JINGYI X3 was officially launched on April 10, 2014. It is an important strategic model introduced by Dongfeng Fengxing for young first-time car buyers who have a clear purchasing attitude of "wanting an SUV as their first car". 2. JINGYI X3 makes up for the space disadvantages of small SUVs. With body dimensions of 4382×1835×1705 mm and a wheelbase of up to 2685 mm, it provides spacious accommodation for both front and rear passengers while also considering cargo space, making it an SUV that "combines the best of both worlds" in terms of passenger space and cargo capacity.
Was this review help?
15
5
Share
More Forum Discussions

How to Open the Front Hood of Baojun e100?

Method to open the front hood of Baojun e100: There is a front hood switch near the driver's seat. Open the switch, and the front hood will pop up slightly. Insert your hand into the gap of the front hood, pull the lock handle, and it can be opened. The Baojun e100 is the first new energy vehicle under the Baojun brand of SAIC-GM-Wuling. The dimensions of this car are 2488mm in length, 1506mm in width, and 1670mm in height. The Baojun e100 is positioned as a two-door microcar, featuring a perforated grille design paired with slightly exaggerated and unique lines, giving it strong recognition. The body pillars and roof of the new car are treated with color separation and black spraying, embodying a youthful and colorful theme.
19
0
Share

How to adjust the time on Tiggo 3?

Tiggo 3 time adjustment method: Press and hold the button on the instrument panel without releasing it. When the time on the instrument panel starts flashing, you can release the button and then press it to adjust. After adjusting the hour section of the car time, let it flash naturally 5 times, and it will automatically jump to the minute section. At this time, press the instrument panel button again to adjust the time; after all adjustments are completed, let it flash 5 more times and it will automatically stop. Tiggo 3 is Chery's first SUV, with dimensions of 4420mm in length, 1760mm in width, and 1670mm in height. It features a fashionable and dynamic front grille with piano black paint, a new eagle-eye style headlight assembly, and dual five-spoke 17-inch aluminum alloy wheels, giving the overall exterior a more youthful and dynamic appearance.
6
4
Share

How to Accurately Locate the Clutch Half-Engagement Point

Methods for accurately locating the clutch half-engagement point: As you lift the ball of your foot, it's a gradual process of engaging power. When the driving force and resistance are evenly matched, that's the half-engagement state. The correct posture is to place the ball of your left foot at the center of the clutch pedal, with the entire foot moving up and down during operation. During normal vehicle operation, the clutch should be fully engaged without any slippage. Therefore, avoid unnecessarily pressing the clutch or resting your foot on it - instead, place your left foot on the floor to the left of the clutch pedal. The vehicle's clutch is only used during starting, gear shifting, and low-speed braking.
12
3
Share

Where is the AUX port on the 7th generation Accord?

The 7th generation Accord does not have an AUX interface. The AUX interface refers to an audio input interface that can output audio from electronic audio devices including MP3 players, allowing the music from these devices to be played through the car's sound system. AUX is an additional signal line design. In general audio equipment, besides the standard output and input terminals, there are often several additional input/output terminals labeled AUX, serving as backup connection points. The 7th generation Accord is a B-segment car under Honda, with dimensions of 4854mm in length, 1821mm in width, and 1463mm in height.
13
5
Share

Do You Need to Press the Clutch When Downshifting a Manual Transmission Car?

When downshifting a manual transmission car, you need to press the clutch. In an emergency, the correct method is to first press the brake to reduce speed, then press the clutch and quickly shift to a lower gear. Remember, the first action should always be pressing the brake to slow down the car as quickly as possible. However, avoid stomping on the brake suddenly to prevent the engine from stalling. Notes on braking and clutching: If you need to slow down while driving, first press the brake. Do not press the clutch with your left foot while braking with your right foot, as this can cause the car to lose traction suddenly, especially on slippery roads, leading to skidding. When the car is moving at high speed, pressing both the brake and the clutch simultaneously will disconnect the engine's resistance, causing the car to accelerate suddenly. This requires applying more force on the brake to control the speed.
11
1
Share

How to Test the Camshaft Position Sensor?

Camshaft position sensor testing methods: 1. Using a multimeter: Measure the resistance between sensor terminal 1 and ECU terminal 62, sensor terminal 2 and ECU terminal 76, sensor terminal 3 and ECU terminal 67 with a multimeter. Under normal conditions, the resistance should not exceed 1.5 ohms. If the reading is too high or infinite, the sensor is faulty and requires repair or replacement. 2. Using an oscilloscope: While the engine is running, measure the signal waveform between the signal output terminal and ground terminal of the magnetic camshaft position sensor with an oscilloscope. The waveform displayed on the oscilloscope should be a sine wave with amplitude between 0-5V. The waveform amplitude remains constant, but the frequency increases as engine speed rises.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.