Where is the cabin air filter located on the Peugeot 307?

1 Answers
Myrtle
07/30/25 8:26am
In the upper left corner of the engine compartment. For the health of vehicle occupants, it is recommended to replace the cabin air filter of the Peugeot 307 every six months. Below is relevant information: 1. The cabin air filter primarily helps filter out fine impurities and dirt present in the vehicle, thereby providing a more comfortable and superior interior environment. During engine operation, a large amount of external air is required, which inevitably draws in impurities. The cabin air filter removes these impurities and microorganisms from the air. 2. When the airflow from the vehicle's vents is noticeably weaker than before, the filter may be clogged with dust and needs replacement. If you notice unpleasant odors from the air conditioning, such as sour or foul smells, besides replacing the filter, the entire ventilation system should be inspected. For those living in cities with high levels of sand and dust, it is advisable to shorten the replacement interval. In cities with clean air and a pristine environment, the replacement interval for the cabin air filter can be appropriately extended.
Was this review help?
19
4
Share
More Forum Discussions

What Causes Excessive Engine Noise in Cars?

Excessive engine noise in cars can be attributed to the following reasons: 1. Insufficient engine oil; 2. Aging engine mounts; 3. Increased carbon buildup in the engine; 4. Deteriorated soundproofing seals. Engine maintenance methods include: 1. Using high-quality engine oil; 2. Using qualified coolant; 3. Regularly cleaning radiator scale; 4. Periodically removing carbon deposits from the engine; 5. Timely replacement of the vehicle's air filter, oil filter, and fuel filter; 6. Checking for damaged spark plugs. The function of an engine is to convert the thermal energy of gasoline into mechanical energy by burning the fuel in a sealed cylinder, causing gas expansion that pushes the piston to perform work.
16
1
Share

Can Car Windshield Washer Fluid Freeze?

Car windshield washer fluid can freeze. Once frozen, it can easily cause the reservoir and hoses to crack. Continuously pulling the washer lever to spray the fluid may also lead to motor burnout. Solutions for frozen washer fluid include: 1. Park the car in the sun to use solar radiation to raise the temperature and thaw the fluid; 2. Add some warm water to the reservoir to melt the frozen fluid—avoid using boiling water as it can damage the hoses; 3. Start the car engine, as the heat from the engine can help dissolve the frozen fluid; 4. After the regular washer fluid thaws, replace it with an antifreeze-type washer fluid.
14
1
Share

What Causes a Low Clutch?

Clutch engagement being too low is due to air in the clutch system or leaks in the clutch master or slave cylinders. Below are specific details about automotive clutches: 1. Clutch too low: The free travel of the clutch becomes excessively long, while the working travel shortens relatively. This prevents the engine and transmission clutch disc from fully disengaging, keeping the vehicle in a semi-engaged state. 2. Clutch disc too high: This results in longer working travel and shorter free travel, making the vehicle prone to stalling during driving. Additionally, the clutch pedal becomes heavier, requiring more effort from the driver. Prolonged low-speed following can lead to excessive physical fatigue for the driver.
17
2
Share

What is the riich car?

riich is Ruiqi. The following are specific details about Ruiqi: 1. Background: Ruiqi is the high-end brand of Chery Automobile. In 2009, Chery adopted a multi-brand strategy, launching 15 new models based on three platforms and establishing four sales subsidiaries for the Chery brand, commercial vehicles, micro vehicles, and international operations. In Chery's multi-brand strategy, Ruiqi was tasked with enhancing the brand image and breaking through the brand's 'ceiling.' 2. Models: Currently, Ruiqi has the following models: G series - G3, G5, G6; M series - M1, M2, M3, M5; X series - X1, X3, X6; Z series - Z5.
12
0
Share

How Much Engine Oil Should Be Added Normally?

Normally, engine oil should be added to the middle between the upper and lower limits on the dipstick. The correct steps to check the engine oil level are: 1. Park the vehicle on a flat surface, turn off the engine, and wait for 15 minutes to allow the oil to flow back into the oil pan; 2. Pull out the dipstick, wipe it clean, and then slowly reinsert it, ensuring the dipstick reaches the bottom of the oil pan; 3. Pull out the dipstick again and check the oil level. If the oil level is within the upper and lower limits on the dipstick, it is normal. If it is above the upper limit, some oil needs to be drained. If the oil level is below the lower limit, the corresponding amount of oil should be added.
9
5
Share

Does the 2019 Sylphy meet the China VI emission standard?

2019 Sylphy meets the China VI emission standard, but there are also models that comply with the China V standard. You can check the vehicle's emission standard through the accompanying vehicle list. The 2019 Sylphy is a compact car with the following dimensions: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, fuel tank capacity 50L, and curb weight 1188kg. The 2019 Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 126PS, maximum power of 93kW, and maximum torque of 168Nm, paired with a 5-speed manual transmission.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.