Where is the cabin air filter located in the new A4L?

What is the Principle of Manual Transmission Starting?

Manual transmission starting principle is: utilizing the combination of gears with different tooth counts meshing and transmitting to achieve changes in speed and torque. Definition of manual transmission: A manual transmission is a speed-changing device used to alter the speed and torque transmitted from the engine to the driving wheels, enabling the vehicle to obtain different traction forces and speeds under various conditions such as starting from rest, climbing hills, turning corners, and accelerating, while also allowing the engine to operate within a more favorable range. Composition of manual transmission: The manual transmission consists of two main parts: the transmission mechanism and the shift control mechanism. The transmission mechanism mainly includes the input shaft, output shaft, reverse gear shaft, various gear wheels, synchronizers, bearings, and housing, with some also having an intermediate shaft. Its function is to change torque, speed, and direction. The shift control mechanism mainly consists of the control device, locking device, and cover, and its function is to perform gear shifting operations.

1

5

Share

Why does the high-pressure fuel pump fail?

The reasons for high-pressure fuel pump damage are: 1. Refueling only when the fuel warning light comes on: This shortens the pump's service life, as too little remaining fuel or complete fuel exhaustion may burn out the pump; 2. Overfilling the tank: This can cause the fuel float and sensor to malfunction, distort the fuel gauge, and increase fuel consumption. Symptoms of a damaged high-pressure fuel pump include: 1. Severe engine vibration; 2. Poor acceleration; 3. Unstable idle; 4. Difficulty starting or stalling. The high-pressure fuel pump is a lightweight and compact pump, mainly categorized into three types: in-line, distributor, and unit pumps. It requires a power source to operate, with the lower camshaft driven by the engine crankshaft gear.

6

1

Share

What is the body length of the Tracker?

The Tracker has a body length of 4411mm, width of 1808mm, height of 1633mm, and a wheelbase of 2640mm. Taking the 2019 Tracker as an example, it belongs to the compact SUV category with a fuel tank capacity of 50 liters, luggage compartment volume of 375 liters, and a curb weight of 1365kg. The 2019 Tracker features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.3L turbocharged engine delivering a maximum horsepower of 165PS, maximum power of 121kW, and maximum torque of 240Nm, paired with a continuously variable transmission.

13

5

Share

What to Do When the Engine System Malfunction Indicator Light Comes On?

Engine system malfunction indicator light on the solution is: 1. After turning off the engine, turn the ignition switch to the ON position; 2. Open the engine compartment and the fuse box cover, refer to the diagram on the fuse box cover to locate and remove the 30A fuel injection fuse, then reinstall it after a few seconds; 3. Turn off the ignition switch, then turn it back to the ON position to start the car, and the malfunction light will be reset. Reasons for the engine system malfunction indicator light coming on: 1. Sensor damage, poor contact, or signal interruption; 2. Poor engine maintenance; 3. Poor quality fuel or engine oil; 4. Incomplete combustion of the air-fuel mixture; 5. Spark plug or ignition coil failure; 6. Fuel pump failure or fuel line blockage; 7. Clogged air conditioning filter.

14

4

Share

What does the handbrake mean?

Handbrake is also known as parking brake. From the driver's perspective, the handbrake is often considered more reliable and safer than the foot brake. Introduction to the handbrake: The professional term for the handbrake is auxiliary brake, which differs in principle from the main brake. It uses a steel cable connected to the rear brake shoes to apply braking force to the vehicle. Prolonged use of the handbrake can cause plastic deformation of the steel cable. Since this deformation is irreversible, long-term use will reduce its effectiveness and increase the handbrake's travel distance. Composition of the handbrake: It consists of a brake lever, cable, brake mechanism, and return spring, acting on the drive shaft or rear wheel brakes to achieve vehicle stability.

14

4

Share

What are the reasons for the buzzing sound in a motorcycle engine?

The reasons for the buzzing sound in a motorcycle engine are: 1. The battery is old and has no power; 2. In winter, the temperature is relatively low, and the engine has not completed preheating; 3. Spark plug failure, the spark plug has been used for too long and its performance has degraded; 4. There is no gasoline in the fuel tank; 5. Low temperatures cause the viscosity of the engine oil inside the motorcycle to increase, and in cold temperatures, the oil may even solidify into clumps. Solutions for the buzzing sound in a motorcycle engine: 1. Check if the automatic choke is stuck in the closed position; 2. Check the engine's compression. If the valves are leaking or the engine is severely worn, it will be difficult to start when cold; 3. Park the motorcycle indoors or in a warmer place, and press the throttle a few times before starting the engine; 4. Clean the carburetor.

14

2

Share

Where is the cabin air filter located in the new A4L?

What is the Principle of Manual Transmission Starting?

Why does the high-pressure fuel pump fail?

What is the body length of the Tracker?

What to Do When the Engine System Malfunction Indicator Light Comes On?

What does the handbrake mean?

What are the reasons for the buzzing sound in a motorcycle engine?

What are the hazards of engine temperature being too high and too low?

How to Use Dongfeng Honda Cruise Control?

Which department handles the vehicle license?

How to Remove the Steering Wheel of a Baojun 730?