Where is the cabin air filter located in the CS35?

1 Answers
LePresley
07/29/25 8:31pm
The cabin air filter of the CS35 is located beneath the glove compartment on the front passenger side, relatively close to the vehicle's center console. To replace the cabin air filter, you first need to open the glove compartment lid. There are three clips on the exterior of the cabin air filter cover plate. By prying these three clips outward, you can open it to access the vehicle's cabin air filter. The CS35 utilizes two types of engines: a 1.6-liter naturally aspirated engine and a 1.5-liter turbocharged engine. The 1.6-liter naturally aspirated engine in the CS35 delivers a maximum power output of 125 horsepower and a peak torque of 160 Newton-meters, with the maximum torque available between 4,000 to 5,000 revolutions per minute.
Was this review help?
16
3
Share
More Forum Discussions

What does an exclamation mark in the middle of a gear mean?

An exclamation mark in the middle of a gear is a transmission fault warning light signal, corresponding to the automatic transmission control unit. It is commonly used in AMT, AT, DCT, CVT and other automatic transmissions to achieve automatic shifting control, making driving easier. When the transmission fault indicator light comes on, it indicates a problem with the transmission system, and the vehicle should be stopped and turned off immediately for repair. The transmission fault warning light may also be triggered by abnormal transmission operation, overheating, high-speed braking, or frequent gear shifting during prolonged high-speed driving, and it may turn off automatically after a while. If it does not turn off for a long time, it means there is a genuine transmission fault that requires prompt repair.
12
0
Share

What Factors May Influence the Rotation of an Electric Motor?

Motor rotation may be related to electric current, as the amount of current directly affects the rotation of an automotive electric motor. All vehicles are equipped with electric motors, specifically the starter motor, which converts the electrical energy from the battery into mechanical energy to drive the engine flywheel rotation, thereby initiating engine startup. The strength of the current directly impacts the operational efficiency of the motor. An electric motor generates a rotating magnetic field through energized coils (i.e., stator windings) and acts on the rotor (such as a squirrel-cage closed aluminum frame) to create magnetoelectric torque for rotation. The motor primarily consists of a stator and rotor, with the direction of force exerted on the energized conductor in the magnetic field being determined by both the current direction and the magnetic field lines (direction of the magnetic field).
17
2
Share

Can a Class B license drive vehicles for a Class C license?

Yes, whether it's B1 or B2, the permitted driving categories include those for a Class C license. Class B2 license: In addition to medium and heavy-duty trucks, it also allows driving other permitted vehicle types such as C1, C2, C3, C4, C5, and M. This means small cars, small automatic transmission vehicles, low-speed trucks, three-wheeled vehicles, and wheeled self-propelled machinery can all be driven. Class B1 license: Permitted vehicle types: Medium-sized passenger vehicles, specifically medium-sized passenger-carrying vehicles (including urban buses with a capacity of 10 to 19 passengers), C1, C2, C3, C4, and M.
6
5
Share

Which country produces BWI shock absorbers?

BWI shock absorbers are produced domestically in China by the company Jingxi Heavy Industry. Overview: Jingxi Heavy Industry was established on November 1, 2009, as a joint venture invested by Shougang Corporation and Fangshan State-owned Assets Management Company. It acquired the former Delphi Chassis Systems, gaining access to the world's most advanced designs and technologies through mergers and acquisitions. The company continuously optimizes its products and supplies them to major global automakers. Development: Jingxi Heavy Industry has established factories in multiple countries, including Beijing, Shanghai, the UK, the US, Poland, Mexico, and India. The factory located in Fangshan District, Beijing, has an annual production capacity of 4 million shock absorbers and 8 million piston rod chroming capabilities.
8
5
Share

Where are the drainage holes located on the Haval H6?

The Haval H6 has drainage holes in the sunroof, all four doors, on both sides of the rear bumper, and under the windshield wipers. Below are the specific details of the Haval H6: 1. Body Dimensions: The Haval H6 measures 4615mm in length, 1860mm in width, and 1720mm in height, with a wheelbase of 2680mm, a fuel tank capacity of 58L, and a curb weight of 1675kg. 2. Powertrain Configuration: The Haval H6 features a MacPherson strut front suspension and a double-wishbone independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 210Nm, paired with a 7-speed dual-clutch transmission.
14
0
Share

What is the difference between an ADV and a rally bike?

ADV stands for adventure bike, and the difference between it and a rally bike is that the ADV has more comfortable shock absorption and seat, a better powertrain, and a larger fuel tank. Here are the details: Adventure bike: ADV is the abbreviation for Adventure, meaning adventure/adventure activities in Chinese. Generally, this type of motorcycle has a tall stature, high side-mounted exhaust, larger-sized spoke wheels, and a low-torque, powerful engine. Rally bike: In terms of speed, the focus of a rally motorcycle is racing, and its riding position and power are designed for competition. For example, reducing wind resistance (the seat is higher), extremely high acceleration (high power and high fuel consumption), and high off-road capability (higher frame).
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.