···
Log in / Register

Where is the cabin air filter located in a 2011 Nissan Sylphy?

5 Answers
MilaMarie
07/29/25 1:47pm

The cabin air filter in a 2011 Nissan Sylphy is located behind the glove compartment on the passenger side. To replace the cabin air filter, you must remove the glove compartment by unscrewing the three screws at the bottom of the glove box and then removing the cover plate to access the filter. The cabin air filter functions to purify the air entering the vehicle interior from outside, improving air cleanliness. Taking the 2021 manual comfort version of the Sylphy as an example, its body dimensions are 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm, a fuel tank capacity of 50 liters, and a trunk capacity of 510 liters. The front suspension of the 2021 manual comfort version Sylphy is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.

Was this review help?
13
1
Share
StRicardo
08/13/25 5:02am

I remember that in my 2011 Sylphy, the cabin air filter is located behind the glove compartment on the passenger side. Open the glove box, and you'll see clips or damping devices at its bottom—just press gently or remove them to access the filter cover. When replacing it yourself, it's best to work in a clean environment to avoid dust flying around. The placement is quite thoughtful, requiring minimal disassembly, and most people can get it done in about ten minutes. After installing a new filter, the AC works much better, providing fresher air, especially with faster cooling in summer. Just make sure not to buy the wrong model—look for one specifically designed for the 2011 Sylphy on e-commerce platforms or at auto parts stores. Check it periodically and replace it about once a year to prevent musty odors from affecting air quality inside the car.

Was this review help?
7
0
Share
Expand All
Bilbo
10/10/25 5:14am

Having worked on many car model modifications, the location of the 2011 Nissan Sylphy's cabin air filter is quite straightforward. It's hidden inside the glove compartment on the passenger side. After opening it, remove the inner lining or loosen a few clips, and the filter housing will be exposed. For those with nimble hands, simply use a screwdriver to gently pry open the cover, allowing you to pull out the old filter and replace it with a new one. DIY replacement isn't difficult—finding the right tools and a compatible filter is key. Avoid buying cheap, off-brand filters. Proper maintenance like this makes the AC system more durable, reduces odors inside the car, and ensures a more comfortable ride on long trips. Regular cleaning also prevents dust from clogging the vents, extending the AC's lifespan and saving you hundreds in costs.

Was this review help?
16
3
Share
Expand All
JacksonAnn
10/10/25 5:16am

My car is a 2011 Sylphy and has been used for quite a while. The location of the cabin air filter is right behind the glove box. Just open the glove box, reach inside, and you'll feel a plastic cover that can be lifted—the filter is right there. Replacing it yourself is simple and saves money, while going to a 4S shop would cost you extra for no good reason. Pay attention to the environment when replacing it—avoid doing it on windy days to prevent dust from getting in. Even beginners can easily handle it. After replacement, the air blown out by the AC will be cleaner with fewer bacteria, which is especially good for sensitive individuals, making their driving experience more pleasant.

Was this review help?
4
0
Share
Expand All
Vera
11/23/25 6:26am

The Nissan Sylphy has been in our family for many years, and the cabin air filter is conveniently located in the glove box area, making it easy to access without complexity. Simply open the glove box, follow the steps to remove the internal baffle, and you'll see the filter housing. Doing it yourself to replace the filter is both hassle-free and cost-saving. Keeping the filter clean is beneficial for the respiratory health of children and the elderly, reducing allergens and ensuring fresher air inside the car, which makes driving more reassuring. When performing the operation, choose a quiet indoor space and be careful not to damage the plastic parts. A regular screwdriver is sufficient for the tools needed, and avoid using excessive force.

Was this review help?
3
2
Share
Expand All
More Forum Discussions

How Many Generations of BMW 7 Series Are There?

BMW has introduced a total of 4 generations of the 7 Series sedan. The production periods of the 4 generations are: The first generation 7 Series was produced from 1977 to 1986. The second generation was from 1986 to 1994, the third generation from 1994 to 2001, and the latest fourth generation was launched last year. Features of the new BMW 7 Series: The new BMW 7 Series will be equipped with upgraded engines: a 2.0-liter turbocharged inline-4, a 3.0-liter turbocharged inline-6, and a 4.4-liter twin-turbocharged V8, corresponding to the 730Li, 740Li, and 750Li models respectively, with maximum power outputs of 258 horsepower, 340 horsepower, and 530 horsepower. The M760Li model features a 6.6T V12 engine, with maximum power adjusted to 585 horsepower and peak torque of 850 Nm, achieving 0-100km/h acceleration in 3.8 seconds. Transmission-wise, all new models are matched with an 8-speed automatic manual transmission.
2
5
Share

How Long is the Mulsanne?

Mulsanne body dimensions: length, width, and height are 5575/1926/1521mm, with a wheelbase of 3266mm. Bentley Mulsanne Powertrain: The new Mulsanne is equipped with a 6¾-liter V8 engine, delivering a maximum power output of 512 horsepower (377 kW) and a peak torque of 1,020 Nm. The engine's power (managed by an 8-speed ZF automatic transmission) is available from idle through the entire rev range, allowing significant acceleration with just a light press of the throttle. It accelerates from 0 to 100 km/h in just 5.3 seconds, with a top speed of 296 km/h. The Mulsanne's V8 engine incorporates key technologies such as cylinder deactivation and variable cam phasing, reducing fuel consumption (combined consumption of 14.6 liters/100 km) and CO2 emissions (342 g/km). Mulsanne Exterior Design: The body color features unique paint options distinct from other Bentley models, with various combinations of red, white, and blue (colors of the British flag) to highlight its British heritage. The handcrafted waistline also uses these three colors, and the "D" pillar is adorned with the distinctive Bentley "B" emblem.
14
0
Share

What are the reasons why the Beidou Star cannot start?

Introduction to the reasons why the Beidou Star cannot start: 1. Circuit or electronic failure: blown fuse, open circuit in the high-voltage coil, open circuit in the low-voltage circuit, detached central ignition wire, leaking distributor rotor, damaged spark plug. Electronic failure mainly refers to the malfunction of the central computer control board. 2. Fuel system failure: stalling caused by fuel system failure often comes with symptoms such as weak engine power and the accelerator pedal feeling like stepping on cotton. Possible locations of fuel system failure include: fuel pump failure, blocked fuel line, clogged fuel filter, carburetor failure, damaged injector, etc. Sometimes, the fuel tank may be empty without the owner's knowledge.
20
3
Share

What are the reasons for the high fuel consumption of the Trumpchi GS4?

The reasons for the high fuel consumption of the Trumpchi GS4 are as follows: 1. Displacement: The engine displacement has a certain impact on the car's fuel consumption, but this impact is a fixed value. 2. Tire pressure: The car's fuel consumption is also directly related to tire pressure. When the tire pressure is too high or too low, the car's fuel consumption will increase. 3. Road conditions: The road conditions on which the car is driven will also affect fuel consumption. 4. Combined fuel consumption: This is calculated by dividing the total emissions from urban and suburban driving cycles by the total mileage completed in these cycles, and then using the emissions to determine the corresponding fuel consumption value.
6
4
Share

Why is there a shortage of Volkswagen car chips?

The reasons for the shortage of Volkswagen car chips are as follows: 1. Due to the global shortage in the chip industry supply: the production of certain models of several automakers, including FAW-Volkswagen and SAIC Volkswagen, has been affected to some extent. With the advancement of vehicle electrification and intelligence, the importance of semiconductor chips in the automotive manufacturing industry has become prominent. Such electronic components are widely used in automotive parts, including multimedia entertainment systems, smart keys, automatic parking systems, engine and transmission control systems, airbags, etc. 2. The self-sufficiency rate of domestic semiconductor materials is relatively low: basically less than 30%, and most of them are packaging materials with low technical barriers and value. The domestic rate in wafer manufacturing materials is even lower, mainly relying on imports.
16
0
Share

What is the engine model of the Civic Si?

The engine of the Civic Si is an i-VTEC engine. Civic body dimensions: The length, width, and height of the 22 CVT Sport Edition Civic are 4674mm, 1802mm, and 1415mm respectively. Civic chassis: The 22 CVT Sport Edition Civic features front-wheel drive, with a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension. Civic powertrain: The 22 CVT Sport Edition Civic is equipped with a 1.5L turbocharged 4-cylinder engine, delivering a maximum horsepower of 182Ps and a maximum power of 134KW, paired with a continuously variable transmission.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.