Where is the Buick GL8's cabin air filter located?

2 Answers
PhoebeMarie
07/24/25 9:35am
Buick GL8's cabin air filter is located inside the glove compartment on the passenger side. The specific steps for removing the cabin air filter are as follows: 1. Remove the damping rods on both sides of the glove compartment. After removing the glove compartment, you will see a black rectangular cover. 2. Remove the clips, and then you can see the cabin air filter. Here is some relevant information about the cabin air filter: 1. The cabin air filter used in cars is mainly used to filter out impurities from the outside air. Based on the type of cabin air filter, there are two types used in cars: one is the ordinary type, and the other is the activated carbon type. 2. The cabin air filter is a consumable item. After being used for a period of time, it will show signs of aging. It is recommended to replace the cabin air filter every 20,000 kilometers. However, it is important to note that the replacement cycle should also be determined based on the car's usage conditions.
Was this review help?
19
4
Share
HazelRose
08/11/25 4:51am
I often maintain my car by myself and found that the cabin air filter location on the Buick GL8 is quite easy to locate—it's behind the glove compartment in front of the passenger seat. When operating, you need to first empty the glove box, then carefully remove it—usually secured by clips or small screws, just press gently or unscrew them. After removal, you'll directly see a rectangular box where the cabin air filter sits—simply open the cover, pull out the old filter, and insert the new one. Doing it myself gives a great sense of achievement, costing almost nothing—a compatible filter bought online only costs about ten bucks. I make it a habit to replace it every six months or 10,000 kilometers, as accumulated dust can cause musty odors from the AC and affect in-cabin air quality, especially during smoggy days. The deep placement design might be to avoid frequent contamination, but don’t worry about damage—the plastic parts are quite sturdy. Watching a video tutorial for the first replacement makes it even easier.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

How to Turn on the Hazard Lights in Honda CR-V?

Honda CR-V's hazard lights are located between the two air vents above the display screen. The hazard light switch is a red triangle; press it once to turn on the hazard lights. Hazard lights, also known as emergency flashers or warning lights, are a signal light on the vehicle used to alert other vehicles and pedestrians that the car is in a special situation. Below are the relevant details for operating the lights in Honda CR-V: 1. High Beam: Push the control lever forward until you hear a click. 2. Low Beam: When the high beam is on, pull the control lever back to switch to low beam. 3. Flash High Beam: Pull the control lever back and then release it. 4. Auto Light-Off Function: The headlights, exterior lights, and dashboard lights will automatically turn off 15 seconds after removing the key or setting the power mode to LOCK (vehicle off).
17
5
Share

How long is the validity period of a motorcycle temporary license plate?

Motorcycle temporary license plates are valid for 15 days. Below is an extended introduction: 1. Consequences of expiration: New vehicles must not use temporary license plates for more than 15 days, and owners should promptly apply for official license plates from the vehicle management authority. After expiration, penalties may include temporary vehicle seizure, a fine of 200 yuan, and 3 demerit points. 2. Extension information: Temporary license plates for new vehicles can be extended, with a maximum of 3 extensions totaling 21 days. 3. Meaning of temporary license plates: Paper motor vehicle license plates that permit temporary road use, also known as temporary driving license plates. These are temporary vehicle movement certificates issued by the public security vehicle management department for newly purchased vehicles before formal registration.
13
3
Share

What to Do If You Scratch Someone Else's Car While Driving a Shared Car?

After a vehicle scratch accident occurs, you should immediately choose a suitable location to stop the car. After stopping, firmly apply the handbrake as required, cut off the power, and turn off the engine. Confirm the safety conditions of both parties involved. If personal safety is compromised in the scratch accident, you should call the police immediately. Check the condition of the vehicles. It is advisable to use digital tools to record the scene. For example, use the photo function of your mobile phone or a portable digital camera. Record the information of both vehicles and their owners. It is necessary to note down the license plate numbers, driver's licenses, vehicle registration certificates, insurance certificates, and other relevant information of both parties. Determine liability and reach an agreement. Common scenarios include: failing to maintain a safe distance, rear-ending the vehicle in front, where the rear vehicle is responsible; or a motor vehicle changing lanes, affecting the moving vehicle.
5
3
Share

Where is the ETC device switch located?

ETC device switch is located on the top of the ETC electronic tag. ETC is an electronic toll collection system, also known as an automatic road payment system. It is a specialized road toll method used for toll roads, commonly found on highways, bridges or tunnels with toll policies, and certain sections of urban centers to alleviate traffic congestion. The installation method for the ETC device is as follows: 1. Purchase the ETC device, check if all components are complete, and review the installation manual; 2. Determine the installation direction of the ETC device, with the solar panel facing outward; 3. Peel off the adhesive backing of the device, fold the solar panel against the vehicle's front windshield, and press firmly to ensure secure adhesion; 4. Install the device on the upper center of the vehicle's front windshield without obstructing normal driving visibility. It should be adhered in one go and not removed for reapplication; 5. Insert the ETC card to activate the device. Upon hearing a beep and seeing the device indicator light up, the device is activated, and the installation is complete.
9
3
Share

Has the Mazda MX-5 Big Eyes Edition been discontinued?

Mazda MX-5 Big Eyes Edition has been discontinued. Below is the relevant introduction of Mazda MX-5: 1. Model Positioning: The Mazda MX-5 is a lightweight convertible sports car produced by Mazda Motor Corporation. The body dimensions of the Mazda MX-5 are 3915*1735*1245mm. 2. Powertrain: The MX-5 is equipped with a 2.0L naturally aspirated engine, with a maximum power output of 158 horsepower and a maximum torque of 200 Nm. 3. Tires: The MX-5 does not feature a staggered tire setup with narrower front and wider rear tires. All four wheels are the same size at 205/50R16, and the vehicle comes standard with Yokohama Advan-A11A tires.
3
5
Share

Where is the oil pump located on the Baojun 560?

The oil pump is divided into a fuel pump and an engine oil pump. The fuel pump of the Baojun 560 is installed inside the fuel tank. Its function is to draw gasoline from the fuel tank and deliver it through the pipeline and fuel filter to the float chamber of the carburetor. The engine oil pump of the Baojun 560 is installed inside the engine. The function of the engine oil pump is to raise the oil to a certain pressure and then forcibly deliver it to the moving surfaces of various engine components. Below is how the automotive fuel pump works: 1. The fuel pump is installed inside the vehicle's fuel tank and is electrically driven. It consists of three parts: the pump body, the permanent magnet motor, and the housing. 2. When the permanent magnet motor is powered, it drives the pump body to rotate, sucking fuel from the inlet, passing it through the internal structure of the electric fuel pump, and then pressing it out from the outlet to supply the fuel system. 3. The motor part of the electric fuel pump includes a permanent magnet fixed on the housing, an armature that generates electromagnetic torque, and a brush device installed on the housing.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.