Where is the brake light fuse of Chery Tiggo 3 located?

1 Answers
CamilaFitz
07/29/25 9:55am
Chery Tiggo 3's brake light fuse is located near the driver's left foot, under the engine hood. The car fuse box is a container designed for installing automotive fuses, which can be categorized by size into: small car fuse boxes, medium car fuse boxes, and large car fuse boxes. The dimensions of the Chery Tiggo 3 are 4420mm in length, 1760mm in width, and 1670mm in height, with a wheelbase of 2510mm. The vehicle features a stylish and dynamic front grille with piano black paint, newly designed eagle-eye style headlight clusters, paired with dual five-spoke 17-inch aluminum alloy wheels, giving the overall exterior a more youthful and dynamic appearance.
Was this review help?
15
3
Share
More Forum Discussions

What is the fuel tank capacity of the Hongqi H7?

The Hongqi H7 comes in 3 models, all with a fuel tank capacity of 70 liters. The vehicle is equipped with either a 1.8T 188 horsepower L4 engine or a 2.0T 204 horsepower L4 engine, paired with a 6-speed automatic transmission. During actual refueling, the amount of fuel may exceed the calibrated volume. This is because the fuel tank capacity marked by the automaker is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the dashboard, which is marked with 'E' and 'F'. When the needle is close to 'E', it indicates low fuel, while nearing 'F' means the fuel level is sufficient.
16
2
Share

Can You Unplug the Tesla Charging Gun Directly?

Tesla charging cannot be unplugged directly. Method to unplug the Tesla charging gun: First, use the car key to end the charging session, then press the button on the charger. If you hear a click sound, release the button on the charger and then pull out the charging gun. As long as the operation method is correct, the Tesla charging gun can be smoothly unplugged. Precautions for unplugging the Tesla charging gun: On the charging gun card, the position where the thumb rests is the switch. Inside the gap directly below, there is a small metal rod. Just find something that can be inserted into it, push it in, and then press the switch—this should allow you to remove the charging gun. If you encounter a situation where the charging gun cannot be unplugged during the charging process, you can use this method. If it still doesn’t work, you can call the operator or the vehicle customer service.
20
2
Share

What is the Land Cruiser car?

The Land Cruiser is Toyota's Land Cruiser (LAND-CRUISER-200), positioned as a flagship large SUV. Below are the relevant details about the Land Cruiser: 1. The Land Cruiser comes in two models, the 4.0L and the 4.6L. The dimensions are 5170/1975/1930mm in length, width, and height, with a wheelbase of 2850mm. The base model has a length of 5095mm. 2. The Land Cruiser is equipped with safety features such as traction control, vehicle stability control, brake assist, brake force distribution, and anti-lock braking. The 4.6L naturally aspirated V8 engine, codenamed 1UR-FE, delivers a maximum power of 228KW, a maximum horsepower of 310PS, and a maximum torque of 453N·m.
7
0
Share

What engine does the Haima S5 use?

Haima S5 uses the engine model HMA-GN16-VF1, featuring VVT variable valve timing and VIS variable intake manifold technology. Below are the details about the Haima S5 engine: 1. The Haima S5 offers two engine options: a 1.6L and a 1.5T. The 1.6L naturally aspirated engine model is GN16-VF1, equipped with VVT variable valve timing, E-GAS electronic throttle, and VIS variable intake manifold technology, paired with a 5-speed manual transmission. It delivers a maximum power of 122 horsepower and a maximum torque of 160N·m, with peak torque achieved at 4000rpm. 2. The 1.5T turbocharged engine model is GN15-TF, featuring VVT variable valve timing and E-GAS electronic throttle, paired with either a 6-speed manual or CVT transmission. It produces a maximum power of 163 horsepower and a maximum torque of 223N·m.
4
2
Share

What are the reasons for the Hongqi HS5 battery being dead and unable to start?

Hongqi HS5 battery being dead and unable to start may be caused by reasons such as poor quality gasoline, oxygen sensor failure, or spark plug carbon buildup. Poor quality gasoline: Filling up with low-quality gasoline at non-standard gas stations can lead to incomplete combustion of the air-fuel mixture during engine operation, causing the engine fault light to illuminate. This does not affect driving safety but may harm the engine to some extent. Oxygen sensor failure: If the oxygen sensor is damaged or the sensor connector is damaged or loose, it can cause the air-fuel mixture to be too lean or too rich, triggering the fault light. Spark plug carbon buildup: Spark plug carbon buildup can lead to poor engine performance, resulting in difficulties in starting, unstable idling, poor acceleration, backfiring during rapid acceleration, excessive exhaust emissions, increased fuel consumption, and other abnormal phenomena.
19
2
Share

Where is the fuse box located in the 2009 Polo?

The main fuse box of the 2009 Volkswagen Polo is located on the left side of the dashboard, inside the cover above the driver's footwell. Steps to replace a fuse: Turn off the engine and power devices. Locate the corresponding position, use a small pry tool to open the protective cover, and you can see the component information on the inside of the fuse box. Use a test pen to check if the fuse is blown. If it is damaged, remove it with tweezers and replace it. Only fuses with the same current rating (indicated by the same color and printed text) and the same size can be used for replacement. Fuse precautions: Installing fuses of different specifications may cause damage to components or even a fire hazard. Do not replace a fuse with one that exceeds the rated current, as this may cause the component to burn out. Do not splice a broken fuse. Do not use a paper clip as a substitute for the original fuse.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.