Where is the brake light fuse located in the Octavia?

2 Answers
McJason
07/29/25 5:46am
The brake light fuse in the Octavia is located in the fuse box in the front engine compartment. The brake lights are installed at the rear of the vehicle and are red in color to enhance light penetration. This ensures that following vehicles can easily detect when the car in front is braking, even in low visibility conditions, thereby helping to prevent rear-end collisions. The Octavia is a sedan under the SAIC Volkswagen Skoda brand. Taking the Octavia 2020 TSI230 DSG Zhi Xing Luxury Edition as an example: it is equipped with a 1.4T 150 horsepower L4 turbocharged engine, with a maximum power of 110 kW and a maximum torque of 250 Nm.
Was this review help?
15
1
Share
LaWalter
08/12/25 9:18am
I remember that on the Škoda Octavia, the brake light fuse is often located in the fuse box on the driver's side, specifically under the steering wheel or near the footwell. If you look down, you'll find a small plastic cover. Open it, and there's a diagram inside listing the fuse numbers—the brake light fuse might be labeled as F39 or a similar number. Replacing the fuse is simple: first, turn off the engine, use pliers to pull out the old fuse, and insert a new one with the same amperage. These fuses are readily available at electronics stores. Blown fuses are commonly caused by short circuits or incorrect modifications, so regularly check the wiring and prevent water from seeping into the circuits. Malfunctioning brake lights are extremely dangerous because drivers behind you won't see you slowing down, increasing the risk of accidents. Regular maintenance can save a lot of trouble—I recommend checking twice a year and consulting the vehicle manual for details when necessary to ensure peace of mind while driving.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

Does Rain Affect Motorcycles?

Rain can indeed affect motorcycles. Rainwater may cause disc brake failure, allow water to enter the fuel tank leading to carburetor water contamination (affecting startup and engine performance), and dampen spark plugs making ignition difficult. Daily motorcycle maintenance methods include: 1. During the break-in period, maintain idle speed at 100 rpm; 2. Match gears with appropriate speeds; 3. When braking is required, release the throttle, press the rear brake with your right foot while gently applying the front brake with your right hand; 4. Regularly inspect spark plugs; 5. For new spark plug installation, hand-tighten until snug then use a spark plug wrench to tighten an additional 1/4 to 1/2 turn; 6. Regularly lubricate the chain.
16
4
Share

What is the fuel consumption of the Wrangler?

The fuel consumption of the Wrangler is 9 liters/100KM. Meaning of fuel consumption: Vehicle fuel consumption refers to the fuel consumed when driving a certain distance at a specified speed, serving as a theoretical indicator for the vehicle. The fuel consumption per 100 kilometers is a value measured by manufacturers under controlled conditions using a dynamometer installed on the vehicle chassis, converted into speed parameters, and then used to calculate the theoretical experimental fuel consumption data for the model at specified speeds. Classification of fuel consumption: Fuel consumption includes constant-speed fuel consumption and road cycle fuel consumption. Constant-speed fuel consumption refers to the fuel economy indicator when a car is driven at a constant speed on good road conditions, while road cycle fuel consumption is the fuel economy indicator measured when a car is driven in repeated cycles according to specified speeds and time norms on the road, also known as multi-condition road cycle fuel consumption.
2
1
Share

What does the wrench symbol on a car indicate?

When a wrench symbol appears on your car, it is a maintenance reminder indicator, signaling that the vehicle is due for service. This is typically a feature set by manufacturers to alert owners to perform scheduled maintenance based on mileage. The purpose of the maintenance indicator is to notify the driver to service the vehicle after it has been driven a certain distance. The maintenance reminder is part of the car's built-in system, which resets the mileage and time counters after each service. These counters can be customized; for example, they can be set to 10,000 kilometers. When the car reaches this mileage, the maintenance reminder will appear on the dashboard. Vehicles equipped with an onboard computer may display a text message, while those without might only show a "small wrench" symbol. Different manufacturers set varying maintenance intervals, so the exact timing for the wrench symbol to appear should be checked in the vehicle's user manual. After servicing, a technician will reset the maintenance light using a specific procedure. Steps to reset the reminder: Insert the key into the ignition, but do not turn it. Hold down the trip meter reset button for 5 to 10 seconds, then turn the ignition to the "on" position. Wait another 5 to 10 seconds, then start the engine. Keep holding the reset button throughout this process. Following these steps should clear the wrench symbol. If it remains, repeat the process a few times.
18
5
Share

Where is the OBD port on a Corolla?

It is located next to the lower left corner of the hood release switch. Look up from below and you will see a white port. Here is some relevant information about the vehicle's OBD port: 1. OBD, also known as On-Board Diagnostics, can monitor the working condition of the engine control system and other functional modules of the vehicle during operation. By connecting the car's OBD port to a computer, you can view real-time vehicle data and detect faults, providing convenience for car repairs, developing vehicle-related functions, and modifying car equipment. 2. When the vehicle's malfunction indicator light comes on, technicians can connect a computer to the OBD port to read the fault codes, thereby determining the issue with the vehicle and proceeding with repairs.
17
5
Share

How to Remove the Steering Wheel of a Malibu?

First, turn off the engine and rotate the key without pulling it out. Turn the steering wheel 90 degrees to the left, insert a tool into the round hole on the steering wheel, and pry upwards to release one side of the airbag. Next, remove the left and right cover panels of the base model and the U-shaped silver decorative strip. To install the functional wiring harness for the multifunction steering wheel, you need to completely remove the original wiring harness and replace it with a new one. Pull out the horn connector on the right side and then disconnect the interface.
18
0
Share

What is the horsepower of the Cadillac CT5 engine?

The horsepower of the Cadillac CT5 engine is 241 hp. The vehicle is equipped with a 2.0-liter turbocharged engine across all models, delivering a maximum torque of 350 Nm, with the torque peak occurring between 1,500 and 4,000 rpm. The maximum power is achieved at 5,000 rpm, and the engine is paired with a 10-speed automatic transmission. The Cadillac CT5 is a midsize sedan under the Cadillac brand, with dimensions of 4,924 mm in length, 1,883 mm in width, and 1,453 mm in height, and a wheelbase of 2,947 mm. Exterior features include headlights, LED daytime running lights, automatic headlights, front fog lights, headlight functions, sunroof type, front power windows, rear power windows, power-adjustable exterior mirrors, auto-dimming rearview mirror, and a streaming media rearview mirror.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.