Where is the battery located in the Q5?

1 Answers
Griffin
07/29/25 5:56pm
Audi Q5's battery is located behind the spare tire. There is a protective panel near the door, which can be lifted up and removed to reveal the battery. Precautions for battery charging are as follows: 1. Never connect charging cables directly to the car battery. Only use the interface in the engine compartment. 2. When charging the battery, highly explosive mixed gases can be produced. Battery charging should be carried out in a well-ventilated space. 3. A severely discharged battery may freeze at around 0°C. Frozen or thawed batteries must not be charged and should not be used anymore. Freezing may cause cracks in the battery casing, leading to leakage of battery fluid, posing risks of explosion and corrosion. 4. During the charging process, do not connect or disconnect charging cables, as this may cause an explosion hazard. 5. Before charging the battery, always follow the manufacturer's instructions for the charger.
Was this review help?
7
1
Share
More Forum Discussions

Can the Spare Tire Reach a Speed of 100 km/h?

The speed capability of a spare tire reaching 100 km/h depends on its type: 1. A full-size spare tire can reach speeds up to 100 km/h; 2. A non-full-size spare tire cannot reach speeds of 100 km/h. The locations of spare tires include: 1. Under the trunk mat; 2. Mounted on the rear of the vehicle; 3. Beneath the chassis. The steps for replacing a spare tire are: 1. Retrieve the spare tire, jack, and tire wrench from the trunk; 2. Place the jack under the chassis support and slowly lift the vehicle, placing a tire chock under the car for safety; 3. Use the wrench to remove the bolts of the tire that needs replacing and take off the tire; 4. Align the spare tire with the axle and bolt holes, then tighten the tire bolts securely.
4
1
Share

How Many Cylinders Does the Lynk & Co 03 Engine Have?

Lynk & Co 03's engine cylinder count varies depending on the engine type: 1. The 1.5L turbocharged engine has 3 cylinders; 2. The 2.0L turbocharged engine has 4 cylinders. Taking the 2021 Lynk & Co 03 Manual Pure Lite as an example, it is equipped with a 1.5L turbocharged engine, with a maximum power of 115kW, a maximum power speed of 5000 rpm, and a maximum torque speed ranging from 1450 to 4000 rpm. The 2021 Lynk & Co 03 Manual Pure Lite is a compact car with body dimensions of 4639mm in length, 1840mm in width, 1472mm in height, and a wheelbase of 2730mm.
6
4
Share

How many liters of oil should be added to the N52 engine?

The N52 engine requires 7 liters of oil. The method for adding oil is as follows: 1. Start the vehicle engine to warm it up; 2. Unscrew the oil drain bolt; 3. Remove the filter element; 4. Apply new oil to the interface gasket of the new filter element; 5. Pour the new oil into the oil pan; 6. Check for leaks in the lower part of the engine and inspect the oil dipstick, then start the engine for testing. Engine oil is a lubricant composed of: 1. Base oil: The main component of lubricating oil, determining the basic properties of the oil; 2. Additives: These compensate for and improve any deficiencies in the performance of the base oil. The functions of engine oil include: 1. Lubrication; 2. Assisting in cooling; 3. Cleaning; 4. Sealing and preventing leaks; 5. Rust and corrosion prevention; 6. Shock absorption and anti-wear.
10
0
Share

What Causes the Abnormal Noise When Braking and Shifting to P Gear?

The reasons for abnormal noise when braking and shifting to P gear are: 1. The handbrake was not engaged when shifting to P gear; 2. There is a deviation in the steel backing length of the brake pads; 3. The sound of the locking mechanism unlocking. The solutions for abnormal noise when braking and shifting to P gear are: 1. Engage the handbrake after parking and shifting to P gear; 2. Adjust the steel backing length of the brake pads. The car gears include: 1. P gear is the parking gear and starting gear; 2. R gear is the reverse gear; 3. N gear is the neutral gear; 4. D gear is the drive gear, also known as the forward gear; 5. L gear is the low gear; 6. S gear is the sports mode; 7. OD gear is the overdrive gear.
5
1
Share

How to Adjust the Time on a Dash Cam?

The method to adjust the time on a dash cam is: 1. Press the menu button on the dash cam panel; 2. Select the time setting option to make adjustments. The functions of a dash cam include: 1. Recording video and audio of the entire driving process, which can serve as evidence in traffic accidents; 2. Documenting scenic views during road trips. The installation steps for a dash cam are: 1. Attach the dash cam near the rearview mirror; 2. Wrap the cable around the rearview mirror several times to prevent it from coming loose; 3. Tuck the cable along the interior trim panel; 4. Insert the cable into the gap of the glove compartment; 5. Plug the other end of the cable into the cigarette lighter.
12
2
Share

What is the normal tire pressure for the Geely Binyue?

The normal tire pressure for the Geely Binyue is: 1. Front tires between 2.2 to 2.3 bar; 2. Rear tires between 2.4 to 2.5 bar. The manufacturer's recommended tire pressure values can be found in the vehicle owner's manual, on the label near the B-pillar of the driver's door, in the drawer next to the driver's seat, and on the back of the fuel tank cap when refueling. The Geely Binyue is a 5-door, 5-seater compact SUV with body dimensions of: length 4330mm, width 1800mm, height 1609mm, wheelbase 2600mm, fuel tank capacity 456L. The Geely Binyue features front-wheel drive, with MacPherson strut independent front suspension and torsion beam non-independent rear suspension.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.