···
Log in / Register

What Causes the Abnormal Noise When Braking and Shifting to P Gear?

1Answers
MacKira
07/25/2025, 02:15:31 AM

The reasons for abnormal noise when braking and shifting to P gear are: 1. The handbrake was not engaged when shifting to P gear; 2. There is a deviation in the steel backing length of the brake pads; 3. The sound of the locking mechanism unlocking. The solutions for abnormal noise when braking and shifting to P gear are: 1. Engage the handbrake after parking and shifting to P gear; 2. Adjust the steel backing length of the brake pads. The car gears include: 1. P gear is the parking gear and starting gear; 2. R gear is the reverse gear; 3. N gear is the neutral gear; 4. D gear is the drive gear, also known as the forward gear; 5. L gear is the low gear; 6. S gear is the sports mode; 7. OD gear is the overdrive gear.

Was this review help?
105
Share
More Q&A

What are the reasons for a car's air conditioning not cooling and how to detect them?

The reasons for a car's air conditioning not cooling are: 1. Insufficient or too little refrigerant: simply add refrigerant; 2. Too much refrigerant: the proportion of refrigerant in the air conditioning system is strictly required. If the proportion is too high, it will affect heat dissipation. Slowly release some refrigerant at the low-pressure side maintenance port of the air conditioning system; 3. Unqualified refrigerant and refrigeration oil; 4. Moisture has entered the refrigeration system, requiring replacement of the desiccant in the car's air conditioning and re-evacuation of the system. The detection method for a car's air conditioning not cooling is: locate the leakage point. The air conditioning system is generally a single-cooling open type, and the refrigerant mostly uses Freon. During use, the refrigerant is prone to leakage from various connection joints and oil seals. Refrigerant leakage will result in poor cooling or no cooling.
110
Share

What Causes a Clicking Sound from the Chassis When Turning?

The reasons for a clicking sound from the chassis when turning are: 1. The sound from the turn signal returning to position; 2. Friction between plastic components—the steering wheel is usually made of plastic parts, and if the temperature drops, the plastic can harden, naturally leading to friction sounds; 3. Damage to the clock spring in the steering wheel—remove the steering wheel and apply some grease to the clock spring; 4. Aging of the steering tie rod end—replace the steering tie rod end and perform a wheel alignment after replacement. The chassis refers to the combination of the transmission system, running gear, steering system, and braking system in a vehicle. It supports and mounts the engine and its components, forming the overall structure of the vehicle, bearing the engine's power, and ensuring normal operation.
108
Share

How to Set the Horn Sound When Locking the MG MG6?

The method to set the horn sound when locking the MG MG6 is: You can select the lock option in the vehicle's onboard computer settings and click 'Lock ON'. Taking the 2021 MG6 1.5T Automatic Leading Trend Intelligent Edition as an example: It is a compact 5-door, 5-seat hatchback under the SAIC Group, with a length, width, and height of 4704mm, 1848mm, and 1466mm respectively, and a wheelbase of 2715mm. The 2021 MG6 1.5T Automatic Leading Trend Intelligent Edition has a maximum engine torque of 285 Nm, a maximum power of 133 kW, a top speed of 210 km/h, and uses front-wheel drive.
108
Share

What does Honda VSA mean?

Honda VSA indicates that the vehicle's electronic stability control system is turned off or that there is a fault in the VSA system. The VSA light may illuminate for the following reasons: Driver's Misoperation: Under normal circumstances, the VSA system of the vehicle remains in the ON state (i.e., operational mode). The sudden illumination of the VSA light is often due to the driver unintentionally switching the function button to OFF on the center console, unaware of the VSA system's purpose. In this case, the VSA system is manually deactivated. To turn off the VSA light, simply press the function button back to the ON position. Vehicle Hardware Malfunction: If the VSA light illuminates without any driver misoperation, it likely indicates a fault in the electronic stability control system, such as issues with the VSA system's wheel speed sensor, steering angle sensor, control unit, or engine ECU. If the VSA light is caused by a hardware malfunction, it is essential to take the vehicle to a repair shop for inspection and servicing.
106
Share

What year is the 14th generation Crown?

14th generation Crown is from 2015. Taking the Crown 2015 2.5L Executive Edition as an example: It is a large-sized 4-door 5-seater sedan with a length, width, and height of 5020mm, 1805mm, and 1480mm respectively, a wheelbase of 2925mm, equipped with a 6-speed automatic transmission, a top speed of 210 km/h, and a fuel tank capacity of 70L. The engine of the Crown 2015 2.5L Executive Edition has a maximum power of 142 kW, with the maximum power achieved at 6200 rpm. The front suspension uses a double-wishbone independent suspension, while the rear suspension employs a multi-link independent suspension.
110
Share

What does Luz-AZ mean?

Luz-AZ was the license plate designation for early private vehicles in Shanghai, which is no longer in use. Currently, private vehicle license plates in Shanghai have progressed to the letter F. License plates are metal or plastic plates attached to the front and rear of a vehicle, typically made of aluminum, tin, plastic, or paper, displaying the vehicle's registration number, registration region, and other relevant information. They serve as unique identifiers for vehicle registration, allowing authorities to determine the vehicle's origin and access registration details including ownership. Large vehicle plates feature black characters on a yellow background with black borders; trailer plates also use this color scheme. Small vehicle plates display white characters on a blue background with white borders.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.