Where is the AUX port on the 7th generation Accord?

How to Identify the Distance on the Right Side of the Car?

Methods to identify the distance on the right side of the car are as follows: 1. Driving 60 cm from the roadside on the right: When the protruding node of the right wiper overlaps with the roadside target, the car body is still 60 cm away from the roadside. This achieves the effect of driving about 60 cm from the roadside on the right. 2. Parking on the right side: When the node of the right wiper coincides with the roadside, slightly turning the steering wheel to the left can position the car 10 cm from the roadside, achieving the effect of parking on the right side. 3. Right-side overlap: When the driver's line of sight intersects the protruding node of the right wiper with an object or solid line on the ground, the tire will run over the target seen by the driver.

5

0

Share

How to solve the brake noise issue in the eighth-generation Accord?

The brake noise in the eighth-generation Accord is caused by worn brake pads, which need to be replaced promptly. Brake pads are consumable items that gradually wear thin during vehicle use. When the friction layer is nearly depleted, an alarm device on the edge of the brake pad, known as the brake pad wear indicator, comes into play. This indicator rubs against the brake disc, producing a sharp metallic friction sound to serve as a warning, alerting the driver that the brake pads should be replaced. The eighth-generation Accord is a mid-size sedan produced by GAC Honda. It features a MacPherson strut front suspension and a multi-link independent rear suspension. The vehicle's dimensions are 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm.

3

5

Share

Is the Haval H6 compliant with China National V or China National VI emission standards?

The 2018 Haval H6 model complies with the China National V emission standard, while the 2019 Haval H6 model is available in both China National V and China National VI emission standards. For specific details, please refer to the vehicle manual. Below is an introduction to the Haval H6: 1. Overview: The Haval H6 is the flagship model of the Haval brand. It was officially launched on August 25, 2011, at the Great Wall Motors Tianjin factory, positioned as an urban intelligent SUV. 2. Powertrain: Equipped with a 1.5-GDIT-EVO engine, the maximum torque output range has been expanded to 1400-3600 rpm, paired with the second-generation 7DCT transmission, achieving a comprehensive transmission efficiency of up to 95.6%.

8

2

Share

Is the KAMIQ an imported car?

KAMIQ is not an imported car. It is a compact SUV produced by SAIC Skoda and belongs to the joint-venture vehicle category. Taking the 2020 KAMIQ as an example, it is classified as a compact SUV with body dimensions of: length 4390mm, width 1781mm, height 1593mm, wheelbase 2610mm, fuel tank capacity 55l, and curb weight 1270kg. The 2020 KAMIQ features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine delivering maximum power of 112PS (82kW) and maximum torque of 145Nm, paired with a 5-speed manual transmission.

14

1

Share

How to eliminate the maintenance reminder of Haval H6?

The method to eliminate the maintenance reminder of Haval H6 is: 1. Turn off the key, press and hold the button at the lower right of the instrument panel; 2. Turn the key to the position where all the instrument lights are on, and you will find that the small wrench on the instrument panel stops flashing; 3. Release the button and then press the button at the lower left of the instrument panel, and you will find that the small wrench disappears, indicating the successful elimination of the maintenance reminder. Taking the 2021 Haval H6 as an example, it belongs to the compact SUV category, with body dimensions of: length 4615mm, width 1860mm, height 1720mm, wheelbase of 2680mm, fuel tank capacity of 58l, and curb weight of 1675kg.

12

3

Share

Can Old License Plates Be Transferred to a New Car?

Old license plates cannot be directly transferred to a new car. To transfer them to a new car, you need to go to the vehicle management office to complete the transfer of the old vehicle. During the transfer process, you must request to retain the license plates, and the old plates must be surrendered first. After obtaining the new car, go to the vehicle management office to retrieve the old license plates by providing the date of surrender to the staff. Owners who retain old license plates will not receive temporary plates and must display the old plates until the new metal plates are issued, which takes about 15 working days. There are certain conditions for applying to retain old license plates: 1. All accidents and violations involving the owner's original vehicle must be resolved; 2. The old license plates must have been used for at least 3 years; 3. The owner must not apply for retention within 6 months after completing the transfer or registration procedures for the original vehicle.

9

5

Share

Where is the AUX port on the 7th generation Accord?

How to Identify the Distance on the Right Side of the Car?

How to solve the brake noise issue in the eighth-generation Accord?

Is the Haval H6 compliant with China National V or China National VI emission standards?

Is the KAMIQ an imported car?

How to eliminate the maintenance reminder of Haval H6?

Can Old License Plates Be Transferred to a New Car?

How to Replace the Taillight on a Lavida?

What does 'set' mean on the Lavida?

How to Replace the Cabin Air Filter in JAC Refine S3?

What is the reason for the EPC light on the car dashboard?