
To replace the cabin air filter in the Refine S3, follow these steps: 1. Open the glove box and unhook the small latch on the right side; 2. Pinch both sides of the glove box inward to release it, then remove the cabin air filter housing; 3. Release the clips on both sides and pull out the old cabin air filter; 4. Insert the new cabin air filter into the housing and reinstall the glove box. The JAC Refine S3 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 116 PS, a maximum power output of 85 kW, and a peak torque of 150 Nm, paired with a 6-speed manual transmission.

As a veteran driver who has owned the Refine S3 for many years, I find changing the AC filter is really not complicated. There's a glove compartment on the passenger side—just open it, clear out the contents inside, and you'll see limit stops on both sides. Gently squeeze them inward, and the entire glove box will come down. This reveals a small cover plate secured with plastic clips. Pry it open to pull out the old filter. Remember the direction of the arrow on it—that indicates airflow. When installing the new filter, make sure the arrow points toward the front of the car; otherwise, airflow will be weak and dust will accumulate more easily. Snap the cover back into place and reattach the glove box, and you're done. I make it a habit to replace the filter every 15,000 kilometers or at the change of seasons—this prevents odors and reduces allergens. Choosing an activated carbon filter is the most cost-effective option; they cost just a few dozen yuan online, saving you the labor fee at repair shops. Doing it yourself takes only about ten minutes, saving you a lot of money over time, and the air in the car stays much fresher.

For someone like me who values quality of life, changing the air conditioning filter is a must-do routine task. In the JAC Refine S3, it's located behind the glove compartment on the passenger side. Open the glove box, clear out any clutter, and you'll find clips on both sides—just press gently to remove the glove box, revealing the filter cover panel underneath. Unclip the cover, pull out the old filter, and note the arrow direction; insert the new filter in the same orientation. Reattach the cover and reposition the glove box. Replacing it annually effectively removes dust, pollen, and musty odors, safeguarding respiratory health. Buying filters online is convenient, and opting for eco-friendly materials is even better, as it reduces chemical pollution when you DIY. Regular replacement also extends the AC system's lifespan, keeping cabin air fresh and comfortable.

When I first started driving, I was also afraid of making mistakes, but changing the air filter for the Refine S3 is quite simple. On the passenger side, there's a glove box. Open it, press the protrusions on both sides to remove the glove box, revealing a plastic cover. Lift the cover to access the old filter, noting the direction of the arrow. Insert the new filter in the same direction, replace the cover, and reinstall the glove box. It only needs to be changed every 10,000 kilometers or so. Try it yourself and you'll see it's not much effort.

As an environmental advocate, I recommend changing the air filter yourself—it's both economical and sustainable. In the Refine S3, it's located behind the glove compartment on the passenger side. Empty the glove box, press inward on both sides to release the stops and remove it. There's a small cover with clips underneath; open it to take out the old filter. When installing the new filter, ensure the arrow points toward the front of the car and the size matches. Secure the cover and reassemble the glove box. This method saves energy and resources while reducing pollution from repair shops. It's advisable to replace the filter every 12,000 kilometers, opting for recyclable filters to improve air quality. Proper maintenance can also extend your vehicle's lifespan—a win-win situation.

I'm a car enthusiast, and changing the air conditioning filter is a breeze for me. In the Refine S3, the filter is located behind the glove compartment on the passenger side. Open the glove box, squeeze the brackets on both sides to remove it, revealing the cover plate clips. Pull them open and take out the old filter. Carefully note the airflow direction arrow, align the new filter, and place it in before securing the cover. Reinstall the glove box. Be gentle to avoid damaging the plastic parts. Replacing it every 10,000 kilometers is ideal, and choosing an OEM-spec or activated carbon filter ensures better durability. DIY is quick and cost-effective.


