Where is the auto start-stop switch located on the Fengshen AX7?

How to Replace Spark Plugs in a Car?

The method for replacing spark plugs in a car is as follows: 1. Wait for the engine to cool down completely, open the hood, disconnect the ignition coil plug, then use a socket to remove the ignition coil, and you will see the spark plugs; 2. Select a socket according to the size of the spark plug nut and turn it counterclockwise to loosen, then use a magnetic rod to extract the spark plug; 3. Use the magnetic rod to hold the new spark plug and place it into the hole, then follow the reverse steps above for installation. When installing the spark plugs, a specialized torque wrench should be used to tighten them. If they are not tightened enough, it may cause cylinder leakage, and if they are tightened too much, it may lead to spark plug breakage.

15

2

Share

How to Check the Vehicle Annual Inspection System?

The first method is to check the annual inspection date on the duplicate of the vehicle owner's driving license. You can also check the annual inspection sticker on the windshield, which shows the month and year. First, you need to log in to the local traffic police website, enter the vehicle information query section, and input the license plate number and engine identification code (VIN) to check. You can directly bring your ID card, driving license, and other documents to the vehicle management office or the violation processing hall to inquire.

20

2

Share

Is it necessary to repair a scratched bumper?

If the bumper scratch affects the appearance of the car body, it can be repaired; if it does not affect the appearance, it may not need to be repaired. Here is more information about car bumpers: 1. The car bumper is a safety device that absorbs and mitigates external impacts, protecting the front and rear parts of the car body. 2. The front and rear bumpers of cars are made of plastic, commonly referred to as plastic bumpers. 3. Generally, the plastic bumper of a car consists of three parts: the outer panel, cushioning material, and crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed by stamping cold-rolled thin plates into a U-shaped groove, with the outer panel and cushioning material attached to the crossbeam.

15

3

Share

How Many Kilometers Should a Car Generally Be Serviced?

Generally, a car should be serviced every 5,000 kilometers. Below are the relevant details: 1. Reason: The lubrication level and viscosity of the oil decrease over time. If not replaced, the oil will fail to properly lubricate the engine, affecting its lifespan. When changing the oil, avoid adding unnecessary additives or wear-resistant agents. 2. Additional Information: A new car must undergo its first service when it reaches 2,300 kilometers, which is typically free. This service includes changing the oil, three filters, and gear oil. This is crucial because the initial oil and gear oil contain fine metal particles from the engine's break-in period, and not replacing them can damage the engine.

7

0

Share

What to Do When the Wrench Light on the Dashboard Comes On?

The solution for when the wrench light on the dashboard comes on is as follows: 1. Insert the key—just insert it, do not turn it; 2. Press and hold the operation lever next to the odometer for 5 to 10 seconds, then turn the key to power on; 3. After another 5 to 10 seconds, start the car, keeping the operation lever pressed throughout the process. This function primarily serves to remind the owner to perform car maintenance. Not all vehicles have this reminder function. Vehicles equipped with this feature are preset by the manufacturer with a parameter that triggers the wrench light to appear once a certain mileage is reached. The car dashboard is a device that reflects the working conditions of various vehicle systems, commonly including indicators such as the fuel light, washer fluid light, electronic throttle light, front and rear fog light indicators, and warning lights.

5

Share

Why is the exhaust pipe of a new car turning black?

The reasons for a new car's exhaust pipe turning black include: prolonged idling during warm-up, poor air quality, and the combination of direct fuel injection with turbocharging. The symptoms can be exacerbated by the use of low-quality gasoline, oil burning, or a faulty catalytic converter. A blackened exhaust pipe is not directly related to carbon buildup in the car. For a new car, the blackening may be caused by incomplete combustion of gasoline, or the use of low-quality or mismatched fuel grades. Methods to slow down the blackening of the exhaust pipe include: regular car maintenance, periodic inspection and replacement of spark plugs, regular cleaning of the catalytic converter, minimizing high-gear low-speed driving, reducing idle time, and frequently cleaning carbon deposits from various parts of the engine.

12

1

Share

Where is the auto start-stop switch located on the Fengshen AX7?

How to Replace Spark Plugs in a Car?

How to Check the Vehicle Annual Inspection System?

Is it necessary to repair a scratched bumper?

How Many Kilometers Should a Car Generally Be Serviced?

What to Do When the Wrench Light on the Dashboard Comes On?

Why is the exhaust pipe of a new car turning black?

What is delinte tire?

How many cylinders does the Mercedes-Benz GLC200 have?

Is Venucia a Nissan brand?

How to Replace the Air Conditioning Filter?