Where is the anti-theft screw located on the new A4L?

Why Can't the Brakes Hold Well on Rainy Days?

Because roads are wet and slippery on rainy days, the tire adhesion decreases, and the braking effect is significantly weakened. Here are some relevant introductions: 1. Speed: When encountering water on the road, the speed should be reduced to 20~30 km/h. Reducing speed should mainly rely on the throttle and light braking, and sudden braking must be used with caution. Driving in the rain also requires ensuring that the air conditioning is in good condition, as rain can easily create fog on the windows, and the air conditioning is the most effective method to clear the fog. 2. Precautions: The biggest difficulty in driving in the rain is poor visibility. The low visibility on rainy days can affect the driver's reaction sensitivity. Additionally, driving too close to the vehicle in front can cause water spray from high-speed driving to blur the windshield, so a larger driving distance than usual should be maintained.

10

5

Share

Why is there a speed limit on the Toksun Gangu section?

In order to effectively improve road traffic safety management, strive to create a safe, orderly, and smooth road traffic environment, reduce road violations, and curb road traffic accidents. Here are the relevant details: 1. Announcement: From Kumishi Town to the Gangu section of Toksun County: G3012 line 112Km to 56Km, with a section length of 56 kilometers. The speed limit for small vehicles is 60Km/h, with a minimum passing time of 56 minutes, and for large vehicles, it's 40Km/h, with a minimum passing time of 84 minutes. Within the 56-kilometer section, there are 6 sub-sections with simultaneous section speed monitoring, and 6 radar fixed-point speed monitoring points. 2. Provincial Highway 301: S301 line 39Km to 98Km, with a section length of 59 kilometers, speed limit 80Km/h, minimum passing time 44 minutes and 15 seconds. Within the 59-kilometer section, there are 4 sub-sections with simultaneous section speed monitoring.

12

5

Share

Can I Take Subject Two Only After Passing Subject One?

After completing Subject One, you can start learning Subject Two projects according to the driving school's arrangement. The online registration for Subject Two can be made 10 days after passing Subject One. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the registration requirement for Subject Two is to complete 26 study hours, including 2 hours of theoretical knowledge, 3 hours of simulated driving, and 21 hours of practical operation. For a C1 driver's license, you can register online for Subject Two 10 days after passing Subject One. Each registration for Subject Two grants two examination attempts. If the first attempt is unsuccessful, a free retake is allowed. If you do not take the retake or fail the retake, the examination ends, and you can re-register for Subject Two after 10 days. Within the validity period of the learning permit, the number of Subject Two examination registrations must not exceed five. If the fifth registration is still unsuccessful, the results of other passed subjects become invalid. To continue learning for the driving license, you need to re-register from Subject One. Subject Two examination content: completing driving tasks within a designated area; demonstrating proficiency in vehicle operation skills; assessing the ability to judge the vehicle's spatial position. Subject Two, also known as the small road test, includes five mandatory items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. Subject Two examination precautions: After getting into the car, always adjust the seat and rearview mirrors to a suitable position and state, and fasten the seat belt. For parallel parking, find the correct angle quickly, turn the steering wheel rapidly, react promptly, and coordinate with the vehicle's speed. When stopping on a slope, remember to engage the handbrake. When starting, always turn on the left turn signal, release the handbrake, stabilize the clutch, and gently press the accelerator while releasing the clutch to avoid stalling or rolling back. For turning at a right angle, quickly react to the turning point and coordinate with the vehicle's speed to prevent deviation. For driving through curves (S-curve), slow down. Those with good driving sense during practice can pass smoothly in one go. When reversing into a parking space, control the speed, identify reference points accurately, and make minor adjustments if there is any deviation observed in the rearview mirrors. There are three subjects in the driving test: Subject One, Subject Two, and Subject Three. Subject One refers to the examination on road traffic safety laws, regulations, and related knowledge. Subject Two refers to the examination on field driving skills. Subject Three is divided into two parts: road driving skills and safe and civilized driving common sense. The safe and civilized driving common sense test is conducted after Subject Three, so it is commonly referred to as Subject Four. However, in official terms (i.e., the Ministry of Public Security's Order No. 123), there is no such term as Subject Four.

3

Share

Where is the position light located?

Automotive position lights refer to the front and rear position lights on a vehicle, similar in size to clearance lights and width indicator lights. Here is some relevant information: 1. Function: When the position lights are on, they indicate the presence and approximate width of the vehicle, making it easier for other vehicles to judge during passing or overtaking. These lights, installed at the front of the vehicle, make the car more recognizable during daytime driving. In other words, these lights are not for illuminating the road for the driver but to alert others that a vehicle is approaching. 2. Precautions: Position lights should be turned on when the vehicle is turning to alert surrounding vehicles and pedestrians. The position light tubes use xenon lamps and are controlled by a single-chip microcomputer circuit, featuring alternating left-right flashing for continuous operation.

15

2

Share

What is the fuel tank capacity of the Great Wall M4?

The fuel tank capacity of the Great Wall M4-2015 1.5L AMT Comfort model is 45L. The vehicle is equipped with a 1.5L naturally aspirated engine and a 6-speed mechanical automatic transmission (AMT). The drivetrain configuration is front-engine, front-wheel drive. The front suspension is a MacPherson independent suspension, while the rear suspension features a compound torsion beam axle with longitudinal arms. Among vehicles in the same class, the Southeast DX3-2019 1.5L Manual Elite model (China V) has a fuel tank capacity of 45L, and the Changan CS15-2021 1.5L Manual Entry model has a capacity of 44L. During actual refueling, the amount of fuel may exceed the nominal capacity. This is because the fuel tank capacity specified by manufacturers measures from the tank bottom to the safe fill level, leaving some space between the safe fill level and the tank opening. This space accommodates fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual fuel volume may exceed the nominal capacity. To check remaining fuel, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (Empty) and F (Full). When the needle approaches E, it indicates low fuel, while proximity to F signifies sufficient fuel levels.

13

0

Share

Where is the diesel engine thermostat located?

Diesel engine thermostat is located at the water outlet on the upper part of the engine. Here are the relevant details: 1. Thermostat: It is a valve that controls the flow path of the coolant. It is an automatic temperature-regulating device, usually containing a temperature-sensing component that opens or closes the flow of air, gas, or liquid through thermal expansion or contraction. 2. Composition: The thermostat is typically composed of a spring, rubber hose, temperature-sensing body, thermostat valve, valve seat, push rod, upper and lower supports, etc. Its function is to automatically adjust the amount of water entering the radiator based on changes in coolant temperature, while also altering the water circulation range, namely the large and small circulation loops. This allows for the regulation of the cooling system's heat dissipation capacity, ensuring the engine operates within the appropriate temperature range.

3

0

Share

Where is the anti-theft screw located on the new A4L?

Why Can't the Brakes Hold Well on Rainy Days?

Why is there a speed limit on the Toksun Gangu section?

Can I Take Subject Two Only After Passing Subject One?

Where is the position light located?

What is the fuel tank capacity of the Great Wall M4?

Where is the diesel engine thermostat located?

What happens if 12 points are deducted from the driver's license and not handled for three years?

Why hasn't the fuel gauge gone up after refueling? What are the reasons?

What is a mid-size car?

What Are the Common Faults of Diesel Vehicle Electronic Throttle Pedals?