···
Log in / Register

Where is the air intake of the Roewe RX5 located?

4 Answers
DiDaniel
08/27/25 8:45am

The air intake of the Roewe RX5 is located in the engine compartment, at the upper left corner of the radiator. Overview of car air intake: The car air intake is part of the engine's intake system. The location of the air intake varies among different car models. Some are located in front of the engine, while others are at the rear. The position and shape may differ from one car to another, but one commonality is that they are generally situated within the engine compartment. Opening the hood, the location of the air filter indicates where the car air intake is. Symptoms of a leaking car air intake: A leaking car air intake may cause various issues such as reduced engine power, increased nitrogen oxide emissions in the exhaust, and difficulty starting the car.

Was this review help?
8
0
Share
DeMaddox
09/09/25 7:24am

As a frequent driver of the Roewe RX5, I've noticed that the air intake is tucked away beneath the hood towards the front. You can see it by opening the hood—it's roughly positioned behind the front bumper near the radiator area, designed to be quite concealed to prevent debris ingestion.

During routine checks, first turn off the engine and engage the handbrake, then carefully lift the hood. Looking down from the front of the car, you can locate it—this is a critical component for air intake, directly affecting engine performance and fuel consumption.

If you've driven through water or muddy roads, remember to check for blockages like leaves or sand. Keeping it clean prevents engine breathing issues. Regular maintenance of the air filter is also essential since the filter element sits right behind the intake, and replacing it is fairly straightforward.

Was this review help?
6
2
Share
Expand All
GriffinMarie
10/23/25 8:16am

Having driven for several years, the air intake of the Roewe RX5 is typically located in the upper area at the bottom of the front end, specifically inside the engine compartment near the front grille. You can see it by opening the hood. This position is cleverly chosen to efficiently draw in cold air while driving, helping the engine burn cleaner. If the air intake gets clogged with dust or takes in water on rainy days, the engine may work with insufficient oxygen, leading to increased fuel consumption or even stalling. During routine maintenance, I make it a habit to check the air intake passage for blockages every 5,000 kilometers, especially after dusty weather. Simply use a soft brush to clean surface dust; for more complex issues, it's best to have it inspected by a professional shop.

Was this review help?
7
5
Share
Expand All
StEliza
12/06/25 8:40am

When I first bought the car, I was also curious about the location of the Roewe RX5's air intake. Later, I discovered it myself—it's positioned on the inner side of the front bumper, towards the center. You can locate it by opening the hood and looking towards the front of the car. This component serves as the air passage for the engine, designed relatively low but well-protected. If it gets flooded or clogged with debris, the engine sound may become muffled, and you might feel a lack of power when driving at high speeds. Regular car washes can help prevent such issues.

Was this review help?
14
4
Share
Expand All
More Forum Discussions

How Many Generations of BMW 7 Series Are There?

BMW has introduced a total of 4 generations of the 7 Series sedan. The production periods of the 4 generations are: The first generation 7 Series was produced from 1977 to 1986. The second generation was from 1986 to 1994, the third generation from 1994 to 2001, and the latest fourth generation was launched last year. Features of the new BMW 7 Series: The new BMW 7 Series will be equipped with upgraded engines: a 2.0-liter turbocharged inline-4, a 3.0-liter turbocharged inline-6, and a 4.4-liter twin-turbocharged V8, corresponding to the 730Li, 740Li, and 750Li models respectively, with maximum power outputs of 258 horsepower, 340 horsepower, and 530 horsepower. The M760Li model features a 6.6T V12 engine, with maximum power adjusted to 585 horsepower and peak torque of 850 Nm, achieving 0-100km/h acceleration in 3.8 seconds. Transmission-wise, all new models are matched with an 8-speed automatic manual transmission.
2
5
Share

How Long is the Mulsanne?

Mulsanne body dimensions: length, width, and height are 5575/1926/1521mm, with a wheelbase of 3266mm. Bentley Mulsanne Powertrain: The new Mulsanne is equipped with a 6¾-liter V8 engine, delivering a maximum power output of 512 horsepower (377 kW) and a peak torque of 1,020 Nm. The engine's power (managed by an 8-speed ZF automatic transmission) is available from idle through the entire rev range, allowing significant acceleration with just a light press of the throttle. It accelerates from 0 to 100 km/h in just 5.3 seconds, with a top speed of 296 km/h. The Mulsanne's V8 engine incorporates key technologies such as cylinder deactivation and variable cam phasing, reducing fuel consumption (combined consumption of 14.6 liters/100 km) and CO2 emissions (342 g/km). Mulsanne Exterior Design: The body color features unique paint options distinct from other Bentley models, with various combinations of red, white, and blue (colors of the British flag) to highlight its British heritage. The handcrafted waistline also uses these three colors, and the "D" pillar is adorned with the distinctive Bentley "B" emblem.
14
0
Share

What are the reasons why the Beidou Star cannot start?

Introduction to the reasons why the Beidou Star cannot start: 1. Circuit or electronic failure: blown fuse, open circuit in the high-voltage coil, open circuit in the low-voltage circuit, detached central ignition wire, leaking distributor rotor, damaged spark plug. Electronic failure mainly refers to the malfunction of the central computer control board. 2. Fuel system failure: stalling caused by fuel system failure often comes with symptoms such as weak engine power and the accelerator pedal feeling like stepping on cotton. Possible locations of fuel system failure include: fuel pump failure, blocked fuel line, clogged fuel filter, carburetor failure, damaged injector, etc. Sometimes, the fuel tank may be empty without the owner's knowledge.
20
3
Share

What are the reasons for the high fuel consumption of the Trumpchi GS4?

The reasons for the high fuel consumption of the Trumpchi GS4 are as follows: 1. Displacement: The engine displacement has a certain impact on the car's fuel consumption, but this impact is a fixed value. 2. Tire pressure: The car's fuel consumption is also directly related to tire pressure. When the tire pressure is too high or too low, the car's fuel consumption will increase. 3. Road conditions: The road conditions on which the car is driven will also affect fuel consumption. 4. Combined fuel consumption: This is calculated by dividing the total emissions from urban and suburban driving cycles by the total mileage completed in these cycles, and then using the emissions to determine the corresponding fuel consumption value.
6
4
Share

Why is there a shortage of Volkswagen car chips?

The reasons for the shortage of Volkswagen car chips are as follows: 1. Due to the global shortage in the chip industry supply: the production of certain models of several automakers, including FAW-Volkswagen and SAIC Volkswagen, has been affected to some extent. With the advancement of vehicle electrification and intelligence, the importance of semiconductor chips in the automotive manufacturing industry has become prominent. Such electronic components are widely used in automotive parts, including multimedia entertainment systems, smart keys, automatic parking systems, engine and transmission control systems, airbags, etc. 2. The self-sufficiency rate of domestic semiconductor materials is relatively low: basically less than 30%, and most of them are packaging materials with low technical barriers and value. The domestic rate in wafer manufacturing materials is even lower, mainly relying on imports.
16
0
Share

What is the engine model of the Civic Si?

The engine of the Civic Si is an i-VTEC engine. Civic body dimensions: The length, width, and height of the 22 CVT Sport Edition Civic are 4674mm, 1802mm, and 1415mm respectively. Civic chassis: The 22 CVT Sport Edition Civic features front-wheel drive, with a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension. Civic powertrain: The 22 CVT Sport Edition Civic is equipped with a 1.5L turbocharged 4-cylinder engine, delivering a maximum horsepower of 182Ps and a maximum power of 134KW, paired with a continuously variable transmission.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.