Where is the air filter of BMW 730?

1 Answers
RhettAnn
07/28/25 2:57pm
BMW 730 air filter location varies depending on the model. Here is the introduction for BMW 730: 1. The air filter of the old BMW 730 is located under the wiper in the engine compartment. 2. The air filter of the new BMW 730 is located in the glove box on the passenger side. Extended information: 1. Take the BMW modified 730 as an example. It is a 4-door, 4-seater large sedan with a body size of 5273 mm in length, 1902 mm in width, 1498 mm in height, and a wheelbase of 3210 mm. 2. The BMW modified 730 is equipped with a 4.4t twin-turbocharged engine, with a maximum power of 390 kW and a maximum torque of 750 Nm. The driving method is front four-wheel drive. The front suspension uses a double-wishbone independent suspension, and the rear suspension uses a multi-link independent suspension.
Was this review help?
11
4
Share
More Forum Discussions

What is the shelf life of engine oil?

The shelf life of opened engine oil is about one year, while unopened engine oil can last up to 5 years. Once poured into the engine, the oil has a shelf life of 6 months. Below are details regarding the shelf life of engine oil: 1. Unopened engine oil typically has a shelf life of around 5 years, though some oils may have a 10-year shelf life. 2. Engine oil poured into the engine: For oil that has been poured into the engine but used only occasionally—such as in vehicles that will be left unused for extended periods—if the oil was recently changed before long-term storage, it is recommended to replace it with fresh oil if more than 6 months have passed. If the oil has already been used for a considerable period, the storage time should be shorter; it is advisable to replace it if left unused for more than 3 months. 3. Leftover oil after maintenance: If stored properly, leftover oil from maintenance can last about a year. However, for safety, it is recommended to use it within six months.
10
1
Share

Which Driving Test Subject Does Hill Start Belong To?

Hill start is part of Subject 2. Here are the specific details about hill start: 1. Hill start is a test item that comes after the uphill parking test. 2. Content of hill start: It's a field test in driving license Subject 2, which requires starting a vehicle parked on a steep slope. Below are extended details about hill start: 1. Maintain correct driving posture, pay attention to various traffic conditions ahead, and avoid looking down. 2. The operation sequence is: left foot steps on clutch, right foot gradually presses accelerator, shift lever into low gear, right foot steps on accelerator pedal. When engine sound changes or vehicle slightly vibrates, quickly release handbrake, slightly press accelerator again, and slowly release clutch pedal.
9
1
Share

Where should the fire extinguisher equipped in a car be placed?

The car fire extinguisher should be placed in a location where it can be quickly accessed in a short time. The specific position depends on the vehicle's structure, generally including the following places: 1. Above the driver's right-hand armrest box; 2. To the left of the driver's seat; 3. Inside the car door storage compartment. The car fire extinguisher is specifically designed for vehicle fire suppression and includes two main types: 1. Non-pressure storage hanging type ultra-fine dry powder automatic fire extinguishing device for vehicles; 2. Miniature vehicle pressure storage hanging type ultra-fine dry powder automatic fire extinguishing device. The usage method of the car fire extinguisher is as follows: 1. Bring the extinguisher near the fire scene and stand on the upwind side; 2. Pull out the safety pin, hold the nozzle tightly with one hand, press the handle with the other hand, and sweep the nozzle at the base of the flame.
5
4
Share

What does car cruise control mean?

Car cruise control refers to fixing the speed of the car. More information about cruise control is as follows: 1. Cruise control is also known as cruise control device, speed control system, or autonomous driving system. Its function is: after setting the speed according to the driver's requirements and switching it on, the vehicle automatically maintains the speed without the need to press the accelerator pedal, allowing the car to travel at a fixed speed. 2. With this device, when driving on highways for long periods, the driver no longer needs to control the accelerator pedal, reducing fatigue and unnecessary speed changes, which can save fuel.
2
1
Share

What does it mean when the engine yellow light on the dashboard is on?

The reasons for the engine yellow light on the dashboard being illuminated are as follows: 1. Sensor issues: Sensors include those for coolant temperature, crankshaft position, air flow, intake air temperature, oxygen, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, which will trigger the engine fault light. 2. Maintenance issues: Poor engine maintenance is the most common cause of the engine fault light coming on. 3. Fuel and oil quality issues: The quality of fuel and engine oil matters. The fuel added to a car usually has a specific grade, and engine oil can be semi-synthetic or fully synthetic. If the owner does not follow the required specifications for these, it can lead to engine wear over time. 4. Poor combustion of the air-fuel mixture: Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can all cause poor combustion of the air-fuel mixture in the engine. This can lead to engine carbon buildup or knocking, which the engine's oxygen sensor will detect and report to the ECU, triggering the fault light as a warning. 5. Air intake issues: The engine requires air intake during combustion, making the air filter crucial. If the car's air filter is dirty and not cleaned regularly, it can affect the engine's air intake, potentially leading to blockages over time. In severe cases, this can cause the engine fault light to illuminate.
12
4
Share

What are the precautions after replacing brake pads?

After installing new brake pads, it is necessary to break them in. The relevant precautions are as follows: 1. Find a place with good road conditions and few vehicles to start the break-in process. Accelerate to 60 km/h, gently apply the brakes, and use moderate braking force to reduce the speed to about 10 km/h; 2. Release the brakes and drive a few kilometers to allow the brake pads and discs to cool slightly, then repeat the above steps at least 10 times; 3. The broken-in brake pads still require several hundred kilometers of driving to achieve optimal performance with the brake discs. During this period, drive carefully to prevent accidents.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.