Where is the Air Filter in the Citroen Elysee?

1 Answers
LeLeo
07/30/25 2:07am
The air filter of the Citroen Elysee is located above or on the right side of the engine. According to the vehicle's maintenance manual, the air filter should be replaced every 1-2 kilometers or during each maintenance interval. However, it is recommended to clean the air filter every 5,000 kilometers to reduce the accumulation of sludge in the throttle. The function of the air filter: to filter out particulate impurities in the air, ensuring that sufficient clean air enters the cylinders, preventing floating dust from being sucked into the engine, which can accelerate the wear of the piston group and cylinders. Air filter: It is a type of filter, also known as an air cartridge, air cleaner, or air element. It is mainly used in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms as an air filtration device. During operation, the engine needs to suck in a large amount of air. If the air is not filtered, the suspended dust in the air will be drawn into the cylinders, accelerating the wear of the piston group and cylinders. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, which is particularly serious in dry and sandy working environments. The air cleaner is installed in front of the carburetor or intake pipe to filter out dust and sand particles from the air, ensuring that sufficient and clean air enters the cylinders. Dirty air filter: Using a dirty air filter while driving can cause insufficient air intake into the engine, leading to incomplete fuel combustion, resulting in unstable engine operation, reduced power, and increased fuel consumption. Therefore, it is essential to keep the air filter clean. The car air filter is a device that removes particulate impurities from the air, consisting of one or several air-cleaning filter components. Its main function is to filter out harmful impurities from the air entering the cylinders to reduce early wear of the cylinders, pistons, piston rings, valves, and valve seats. Therefore, before air enters the cylinders, it must first pass through the fine filtration of the air filter. A dirty air filter can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air filter, if it is found to have minimal dust and light clogging, it can be cleaned by blowing compressed air from the inside out and reused. A severely dirty air filter should be replaced promptly.
Was this review help?
7
4
Share
More Forum Discussions

How to Replace the Battery in a Roewe 550 Key?

The method to replace the battery in a Roewe 550 key is: 1. Flip the small switch on the front of the key and pull out the mechanical key; 2. Open the key shell along the groove at the top of the shell; 3. Reassemble the key by following the reverse steps. The Roewe 550 is a relatively standard compact car, with body dimensions of 4648mm in length, 1827mm in width, and 1479mm in height, and a wheelbase of 2705mm. In terms of power, the Roewe 550 is equipped with a 1.8L DVVT naturally aspirated engine, with a maximum power of 98kw and a maximum torque of 170nm.
6
2
Share

What are the differences between CT5 and CT6?

The differences between CT5 and CT6 are: 1. Different positioning: CT5 is a mid-size sports sedan; CT6 is a mid-to-large-size car. 2. Different body dimensions: CT5 has a length, width, and height of 4924mm, 1883mm, and 1459mm respectively, with a wheelbase of 2947mm; CT6 has a length, width, and height of 5223mm, 1879mm, and 1492mm respectively, with a wheelbase of 3109mm. In terms of power, the CT5 is equipped with a 2.0T 10AT powertrain across the range, with the engine delivering a maximum power of 177kw, maximum horsepower of 241ps, and maximum torque of 350nm, paired with a 10-speed automatic transmission. The CT6 is equipped with a 2.0T inline four-cylinder engine, delivering a maximum power of 177kw and peak torque of 350nm, also paired with a 10-speed automatic transmission.
10
1
Share

What Causes a Diesel Vehicle to Emit Black Smoke and Have Insufficient Power?

Here are the reasons why a diesel vehicle may emit black smoke and have insufficient power: 1. Reason one: Check the intake system to see if the intake is smooth, if the turbocharger is functioning properly, and if the valve clearance is appropriate. 2. Reason two: Inspect the fuel lines to ensure both high and low-pressure fuel lines are unobstructed and not leaking. 3. Reason three: Examine the fuel system to check if the fuel supply pump has any cylinder misfires, wear, or if the injectors are malfunctioning. 4. Reason four: Inspect other engine components for wear or damage that may affect power output. Insufficient piston ring tension can lead to black smoke because poor oil scraping results in residual oil on the cylinder walls, which then participates in the combustion of the air-fuel mixture.
9
1
Share

What are the symptoms of a throttle valve malfunction?

Throttle valve malfunctions generally cause: 1. The car cannot start, or after starting, the throttle valve does not return to position when the accelerator is pressed. 2. Black smoke emission and high fuel consumption. 3. High idle speed and unsteady acceleration. Relevant information about the throttle valve is as follows: 1. Definition of the throttle valve: The throttle valve controls the engine's air intake, adjusting the mixture ratio of gasoline and air based on computer signals to ensure complete combustion of gasoline and generate power. In fact, every time a driver presses the accelerator, they are not pressing "fuel" but "air," compressing a certain amount of air into the engine through the accelerator and gear shifting. 2. Causes of throttle valve malfunction: Largely due to carbon buildup inside the throttle valve, problematic throttle valves are often filled with black carbon powder from incomplete combustion. Prolonged use of the throttle valve and poor driving habits are the main causes of carbon buildup.
19
3
Share

What are the three major components of the JMC Ford Equator?

Here is an introduction to the three major components of the JMC Ford Equator: 1. Ford Equator Transmission: The Ford Equator is equipped with a 6-speed wet dual-clutch transmission that matches the engine. The wet dual-clutch is better than the dry type. Considering the transmission uses a rotary knob shift mechanism, shift paddles are also provided for convenient use of the manual shift mode. 2. Ford Equator Engine: The Ford Equator is powered by a Ford EcoBoost225 2.0T engine with a maximum power of 165kW (224 horsepower). 3. Ford Equator Chassis: The chassis of the Ford Equator adopts a unibody structure, with front MacPherson independent suspension and rear multi-link independent suspension.
18
5
Share

What fuel do diesel locomotives burn?

Diesel locomotives burn diesel fuel. The following is an introduction to diesel engines: 1. Introduction: Diesel locomotives use diesel engines as the primary power source, driving the wheels through a transmission device. 2. Regulations: According to the type of internal combustion engine on the locomotive, the vast majority of engines used on national railways are diesel engines. 3. Impact: The fuel (diesel) burns in the cylinders, converting thermal energy into mechanical energy output by the diesel crankshaft. However, this energy is not used to directly drive the wheels. Instead, it is converted through a transmission device into mechanical energy suitable for the traction characteristics of the locomotive, which then drives the locomotive wheels to rotate on the tracks through the running gear. Diesel locomotives are the most widely used. In China, the term 'diesel locomotive' conventionally refers to diesel-powered locomotives.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.