···
Log in / Register

Where is the air conditioning filter for Audi A5 located?

4 Answers
MarianaDella
07/29/25 7:01am
The air conditioning filter for Audi A5 is located under the right front rain tray of the windshield. Generally, the car's air conditioning filter should be replaced every 10,000-15,000 kilometers or once a year. The following are the functions of the Audi A5 air conditioning filter: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. It separates solid impurities such as dust, pollen, and abrasive particles from the air. 3. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and long-lasting moisture adsorption. 4. It prevents the car windows from fogging up, ensuring clear visibility for drivers and passengers and safe driving. It provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety. It also effectively sterilizes and deodorizes.
Was this review help?
15
2
Share
GideonLee
08/12/25 11:24pm
Regarding the location of the Audi A5's cabin air filter, my experience tells me it's generally behind the glove compartment on the passenger side. Every time the season changes, I check it: first, I open the glove compartment, then press the plastic clips on both sides or unscrew the bolts to remove the compartment. At this point, I can see the rectangular filter housing, and I just pull it out to replace it. I replace it myself every 15,000 kilometers or once a year because if not replaced in time, dust and mold can accumulate in the car, leading to unpleasant odors from the air vents, which may affect respiratory health over time. Audi's design is quite user-friendly, as it can usually be done without professional tools. After replacement, the air conditioning feels fresher, especially during long drives when the air circulation improves. Regular maintenance can save a lot on repair costs and extend the life of the air conditioning system.
Was this review help?
13
3
Share
Expand All
PiperMarie
10/04/25 5:10am
I found that the cabin air filter location of the Audi A5 is particularly easy to locate: it's inside the glove compartment in front of the passenger seat. You need to open the compartment and then remove the internal panel or cover - the filter is usually hidden there. After talking with my fellow car owners, most European cars have similar layouts, such as BMW or Mercedes. If you often smell a musty odor while driving, it means the filter is clogged. I recommend replacing it every 12 to 24 months, which can effectively filter pollen and dust, maintaining a comfortable cabin environment. Checking it before using the AC in summer can prevent blowing out impurities that may cause allergies. A simple DIY replacement can make the cabin air much fresher.
Was this review help?
17
2
Share
Expand All
GrahamFitz
11/17/25 6:46am
When I was looking for the cabin air filter in my Audi A5, I found it located behind the glove box. After opening the compartment, removing the clips or covers on both sides reveals the filter housing. The process isn't complicated, and I usually buy the part and replace it myself. I think changing it every two years is frequent enough to prevent odors or air conditioning issues. The location makes maintenance convenient, just be sure to select the correct model number. After replacement, the air quality improves, making travel healthier.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

How to Operate the Gear Shifts on a Volvo S60?

Press the foot brake, then directly shift the gear lever to the P (Park) position. This is the parking gear, which locks the transmission's power output and can also prevent the car from rolling on a slope. With the foot brake pressed, shift to the R (Reverse) gear, then slowly release the foot brake to start reversing. Observe the rearview mirror and the reversing camera, adjust the steering wheel, and do not press the accelerator. Press the brake and shift to the D (Drive) gear. This is the driving gear, where the transmission provides forward power, commonly used for daily driving. The S (Sport) gear is a variant of the D gear, standing for Sport mode. It can be engaged at any time, similar to shifting to other gears. The L (Low) gear is also a variant of the D gear, mainly used for uphill or downhill driving, as well as on snowy, icy, or muddy roads. In low gear, the car outputs stronger torque.
6
3
Share

How to Deal with Water Leaking into the Car Window?

First, remove the accumulated water inside the car. There are several drainage holes at the bottom of the vehicle chassis, which are sealed with rubber plugs. Removing these rubber plugs can help drain the water from the cabin. Use a dry and clean towel to gently wipe off water droplets from the dashboard and seats. If there is significant water accumulation, it is advisable to remove the floor mats to facilitate drying. Turn on the air conditioning and adjust the vehicle's circulation switch to the internal circulation mode, allowing the water vapor inside the cabin to be quickly expelled through the air conditioning system. If the water leakage is due to the window not being properly closed, skip this step. If the window is tightly closed but still leaks, check whether the window rubber seals have aged and replace them if necessary.
8
2
Share

What is the best method for repairing rust on car sheet metal?

If the rust appears on the surface and the area is small, you can use water sandpaper to grind off the rust, then perform touch-up painting, and finally spray a layer of rust-proof paint. If the rust is severe with large areas of paint peeling, it is necessary to completely scrape off the rusted paint, then fill and level with putty. After the putty hardens, proceed with repainting. If the car sheet metal is rusted through, the rusted part should be cut out and re-welded, followed by touch-up painting and spraying. If the damaged area is too large, repair is not recommended; it is better to replace the entire panel.
19
4
Share

What are the solutions for high fuel consumption in the ninth-generation Civic?

Check the tire pressure and wear condition. If the tire pressure is too low, it will increase the friction between the tires and the ground, resulting in greater running resistance and higher fuel consumption. Carbon deposits in the engine ignition system and intake system will cause incomplete combustion and increased fuel consumption. Use the method of intravenous cleaning to remove carbon deposits from various parts. Personal driving habits are closely related to fuel consumption. Pay attention to developing good driving habits, such as avoiding sudden acceleration, frequent starts, and aggressive driving. Follow the manufacturer's requirements for regular vehicle maintenance. Timely replacement of engine oil, three filters, and other wear-prone parts can keep the vehicle in good working condition and reduce fuel consumption.
17
5
Share

What Are the Solutions for a Car Not Starting After Refueling?

Use a multimeter or voltmeter to measure the voltage across the battery terminals and check if it is normal. If the voltage is below the required value, you can start the car by jump-starting. Check if the steering wheel is in a locked state. Generally, by turning the steering wheel forcefully while turning the key, the steering wheel lock can be quickly released. When starting an automatic transmission car, ensure the gear is in P (Park) or N (Neutral). If it is in R (Reverse) or D (Drive), the car will not start, and you must also press the brake pedal. If there is a fault in the high-voltage power supply circuit of the ignition system, it will prevent the spark plugs and ignition coils from functioning. Check if the circuit at this location is unobstructed.
8
0
Share

What is the remote key matching method for Geely King Kong?

Insert the key into the ignition switch, and within 7 seconds, repeatedly switch from OFF to ON three times consecutively. On the third time, leave the key in the ON position. At this point, observe that the anti-theft indicator light (red LED) will flash rapidly for 3 seconds, then pause for 1 second. When the anti-theft indicator light lights up again and then goes off, turn the key from ON→OFF→ON. At this time, the horn will sound once, indicating that the learning mode has been entered. Press any button on the remote control in sequence to learn, with a press time greater than or equal to 2 seconds. The horn will sound once, indicating that the learning is complete.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.