Where is Lexus from?

1 Answers
McJustin
07/29/25 5:18pm
Reasons why songs cannot be played after Lynk & Co Bluetooth connection: 1. Abnormal operation of mobile phone Bluetooth: High resource occupancy in the phone's background may cause the Bluetooth function to malfunction. After connecting to the car's system via Bluetooth, the phone's audio cannot be played through the sound system. Restart the phone and try reconnecting to the vehicle. 2. Incorrect playback source settings: After the phone's Bluetooth connects to the car's system, the playback source needs to be correctly configured in the car's system to play Bluetooth music from the phone through the vehicle's audio. Set the media playback source to Bluetooth playback in the car's system, which can be done by the owner. 3. Incompatibility with the car's system: If the car's system is not fully developed or operates unstably, it may cause Bluetooth function abnormalities, such as intermittent connections, playback stuttering, or failure to play normally. Owners can try upgrading the car's system software to improve stability. According to the manufacturer's lifetime warranty policy, owners can upgrade the car's system software for free at 4S stores. If not covered by the warranty policy, original upgrades at 4S stores will require payment.
Was this review help?
19
5
Share
More Forum Discussions

How to Turn On the Accord Headlights?

Method to turn on the Accord headlights: When the power mode is ON, you can use the automatic lighting control; when the light switch is turned to AUTO, the headlights and other exterior lights will automatically turn on and off based on the ambient brightness. In terms of the Accord's exterior design: The front features a chrome-plated grille, and the rear taillight cluster adopts new LED light sources; for the interior: The dashboard uses a dual-screen design, with a 7-inch display below that can connect with mobile phones; in terms of power: It is equipped with a 2.4L four-cylinder naturally aspirated engine and a 3.5L V6 naturally aspirated engine; for transmission: The engines are paired with a CVT transmission and a 6-speed manual transmission.
12
4
Share

How to Disassemble the Key of an Old BMW 3 Series?

The disassembly method for the key of an old BMW 3 Series: 1. Slowly insert a small blade into the position of the key ear to open a gap, then use a flat-head screwdriver to remove the entire key shell along the key ear to separate the casing; 2. After separating the casing, the circuit board can be easily removed, exposing the battery on the circuit board; 3. There are pins on the back of the circuit board. Place the circuit board back into the key shell, apply 502 glue along the edge of the circuit board, and firmly press the two circuit boards together to complete the process. During disassembly, be careful not to touch the battery contacts or the circuit board when inserting the screwdriver into the opening to avoid damaging the circuit board. Since smart keys use low-intensity radio waves, they may not function properly in the presence of magnetic interference. Frequently placing the smart car key and mobile phone together can inevitably cause the smart car key to malfunction, as the chip inside the smart key may sometimes be interfered with by the phone's frequency, potentially causing the key's remote function to temporarily fail.
7
4
Share

How to adjust the instrument time on the old GL8?

The method to adjust the instrument time on the old GL8 is as follows: 1. Turn on the radio power; 2. Locate the RPT button on the panel and press and hold it for 3 seconds; 3. When the screen display starts flashing, rotate the knob on the right to adjust the hour; 4. Then press the center button of the right knob to select and adjust the minutes; 5. Turn off the radio, and the time will be set correctly. The body dimensions of the old GL8 are 5203mm in length, 1878mm in width, and 1805mm in height, with a wheelbase of 3088mm. The Buick GL8 features design elements such as a three-dimensional waterfall grille, multi-dimensional blue Bi-Xenon HID headlights, a 360-degree wraparound interior design, and ice-blue ambient lighting. The powertrain includes a 3.0L V6 SIDI direct injection engine, a 2.4L Ecotec engine, and a six-speed automatic transmission. It also comes with OnStar All-Time Online Assistant and Buick's high-standard QuietTuning noise reduction technology.
15
2
Share

What Causes Vibration in the Accelerator Pedal?

The reasons for vibration in the accelerator pedal are: 1. Resonance caused by the engine is transmitted to the accelerator pedal through the vehicle body, resulting in a trembling sensation when the foot is placed on the pedal, which is a normal phenomenon; 2. Clutch slippage can also cause vibration in the accelerator pedal. In manual transmission and dual-clutch models, the power transfer and disconnection between the engine and the transmission are accomplished by friction plate clutches. If the clutch plates are severely worn and slipping or the damping springs are broken, it will cause the accelerator pedal to vibrate; 3. Every engine is mounted on the frame using hydraulic or rubber engine mounts. If the engine mounts leak oil or become aged and broken, their damping effect will significantly decrease, which can also lead to vibration in the accelerator pedal.
8
0
Share

Can a Naturally Aspirated Car Be Converted to Turbocharged?

It is possible to convert a naturally aspirated car to turbocharged. To modify a naturally aspirated engine into a turbocharged engine, a turbocharger needs to be installed, and the compression ratio pistons must be replaced. Additionally, internal reinforcement of the engine is required; otherwise, the engine will not be able to withstand the increased power and temperature. The primary function of a turbocharger is to increase the engine's air intake, thereby enhancing the engine's power and torque, making the car more powerful. After installing a turbocharger, the engine's maximum power can increase by 40% or more compared to its naturally aspirated state. However, it is important to note that engine modification is illegal without prior application and registration with the vehicle management department. Failure to do so may result in the vehicle being deemed unroadworthy and could lead to unnecessary complications during annual inspections.
7
2
Share

How to Identify a Vehicle's Emission Standard

Methods to identify a vehicle's emission standard are as follows: 1. Check the vehicle's environmental protection label, which usually has clear markings on the back; 2. Visit the website of the Motor Vehicle Exhaust Pollution Supervision and Management Center for inquiry; 3. Take the vehicle registration certificate (original or copy) to the vehicle management office for inquiry; 4. For new vehicles, refer to the vehicle's factory certificate, which includes this information. However, the certificate is usually kept by the vehicle management office, so it is advisable to make a copy when purchasing a new car; 5. Make a rough estimate based on the vehicle's registration year: China plans to gradually implement the China 6 emission standard from July 1, 2020; vehicles registered after July 2017 comply with the China 5 standard; those produced between September 2009 and July 2017 are China 4 models; those produced between July 2007 and September 2009 are China 3 models; and those produced between July 2004 and July 2007 are China 2 models.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.