Where in Sichuan is License Plate 'Chuan A' from?

What are the reasons for the fan not turning when the water temperature is high?

Specific reasons are as follows: 1. Cooling fan not rotating: The cooling fan may be controlled by a temperature control switch or by a water temperature sensor. 2. Insufficient cooling medium: High-end cars require antifreeze to be added all year round; water or distilled water can be used temporarily; radiator cap leakage. 3. Thermostat damage: If you want to remove the thermostat, the small circulation should be blocked to ensure that all coolant is dissipated by the radiator; when installing a new thermostat, pay attention to the water hole. For example, the Santana does not have a water hole, so a 6mm drill bit should be used to drill a hole. One function is to serve as a mark; the other is that during the heating process of the car, a temperature difference is generated on both sides of the thermostat, allowing the thermostat to open accurately with the water temperature.

117

Share

What are the differences in power between China V and China VI?

The difference in power between China V and China VI models is very minimal, with the main distinctions lying in emission testing and control. The differences between China V and China VI vehicles are as follows: 1. China VI standards have stricter limit requirements. Compared to China V, the China VI standard limits are approximately 40% to 50% more stringent. 2. China VI adopts a fuel-neutral principle. This means that regardless of the type of fuel used, the emission limits are the same. Under the previous China V standards, diesel and gasoline vehicles had different emission standards. 3. Compared to China V, the China VI standard reduces nitrogen oxides (NOx) by 77% and particulate matter (PM) by 67%. It introduces a limit requirement for particle number (PN) and tightens the durability requirements for emission control devices and on-board diagnostic systems (OBD). 4. China VI compliance regulations are more stringent. These include type testing and information disclosure, production consistency checks, new vehicle inspections, in-use compliance checks, and simplifies the method for determining compliance.

107

Share

What is the reason why the Forester's windows cannot be raised or lowered with one touch?

The cause of this situation is likely due to a momentary disconnection of related components leading to power loss and function failure. Additional information: 1. Window introduction: The car window (car-window) is an essential part of the entire vehicle body, designed to meet the needs of interior lighting, ventilation, and the visibility of the driver and passengers. Depending on the installation position of the glass, windows can be categorized as front and rear windshields, side windows, and door windows. The design, structure, and quality of the windows significantly affect the driver's visibility, passenger comfort, exterior aesthetics, and aerodynamic characteristics. Window structures are typically curved and sealed, with rubber sealing strips connecting the window frame and the glass. These seals provide both sealing and cushioning effects to prevent damage to the windshield glass when the window frame deforms due to body stress. 2. Window glass: The front and rear windows of a car usually employ curved glass that enhances visibility and aesthetics, embedded in the window frame with rubber seals or adhered with special adhesives. To facilitate natural ventilation, side windows are often designed to move up and down or forward and backward. Between the glass and the tracks, sealing channels made of materials such as wool or flocked rubber are installed. Some car side windows also use cylindrical glass to optimize vehicle layout.

106

Share

Which Vehicles Are Exempt from Purchase Tax?

Traditional fuel-powered vehicles are subject to purchase tax, while new energy vehicles are exempt from purchase tax. However, there are also special circumstances where purchase tax is not required, as detailed below: Diplomatic Personnel: Vehicles for the personal use of foreign embassies, consulates, and international organizations in China, as well as their diplomatic personnel, are tax-exempt. Military Equipment Procurement: Vehicles included in the military equipment procurement plans of the Chinese People's Liberation Army and the Chinese People's Armed Police Force are tax-exempt. Vehicles with Fixed Installations: Non-transport vehicles with fixed installations are tax-exempt. Non-transport vehicles with fixed installations refer to engineering machinery such as excavators, graders, forklifts, loaders (shovels), cranes, and bulldozers. Special Vehicles for Designated Departments: Special vehicles (hereinafter referred to as flood control and forest firefighting vehicles) purchased by flood control departments and forest firefighting departments, produced by designated manufacturers and of designated models for command, inspection, dispatch, flood control (police), and liaison purposes, are tax-exempt.

103

Share

What is the fuel tank capacity of the Envision in liters?

The Buick Envision has a nominal fuel tank capacity of 65 liters. Here is some extended information: 1. Fuel consumption is significantly influenced by driving habits, average vehicle speed, and road conditions. This is particularly noticeable in automatic transmission vehicles. 2. Different road conditions, such as traffic congestion, vehicle load, fuel quality, use of air conditioning/heating, whether the car is in the break-in period, or if it's an older vehicle, all result in varying fuel consumption levels. 3. Vehicle fuel consumption is generally calculated based on liters per 100 kilometers. For example, a consumption of 10L/100km means the vehicle uses 10 liters of gasoline to travel 100 kilometers. 4. Method to calculate fuel consumption: When refueling, fill until the pump automatically stops (do not top up further), and record the current mileage. After driving for a period, refuel again until the pump stops automatically, and record the amount of fuel added. Calculate the distance traveled since the last refueling and divide the fuel amount by this distance to determine the fuel consumption rate.

105

Share

What Causes a Manual Transmission Car to Stall When Stopping?

Specific reasons are introduced as follows: 1. Driving habits and technical issues: The comfort of driving a manual transmission car mainly depends on clutch control. The clutch must be released gently, as releasing it too quickly at traffic lights to start quickly can easily cause stalling, especially in small-displacement cars. Even experienced drivers often stall because they are trying to find the optimal engagement point for the limited displacement and power—slightly lower and the engine stalls. 2. Fuel quality issues: Thoroughly clean the fuel system, including the fuel injectors, throttle body, and fuel tank. The problem might be caused by poor-quality fuel with too much gum and deposits, clogging the fuel lines and leading to insufficient fuel supply. 3. Excessive dust in the air: The main cause of stalling at idle is excessive dust in the air. During operation, the idle speed control valve and throttle body accumulate deposits. When too much deposit builds up, the engine's idle speed becomes too low and unstable, leading to stalling when idling while driving.

107

Share