Where are the fog lights located on a car?

2 Answers
JohnDella
07/24/25 9:29am
Fog lights are positioned below the headlights, with one on the top and one on the bottom. The rear fog light is located at the rear of the vehicle. The fog light switch is typically found on the car's lighting control system assembly or the lighting control stalk. In adverse weather conditions such as fog, snow, and heavy rain, or when driving in smoky or dusty environments, front fog lights are essential to illuminate the road ahead and ensure driving safety. Front fog lights are yellow, while rear fog lights are red. Their purpose is to light up the road during rainy or foggy conditions and provide a warning to vehicles in front and behind. In terms of light sources, car fog lights include halogen fog lights and LED fog lights. Fog lights are usually installed below the car's bumper, close to the ground. If fog lights are installed too high, the light cannot penetrate through rain or fog to illuminate the road.
Was this review help?
11
1
Share
JosiahLee
08/11/25 4:49am
As a young driver who frequently drives, I've noticed that the positioning of fog lights is actually quite simple yet ingeniously designed. They are generally located below the front bumper of the vehicle, and some cars have a small opening next to the headlights for them. As for the rear fog lights, they are typically integrated into the rear light cluster, making them highly visible when illuminated. This positioning is chosen because fog lights need to emit light at a lower level, illuminating the road in foggy conditions without reflecting off the fog and causing glare, which could otherwise pose significant safety risks. I've checked my own car, and the lights are easy to locate—just flip the switch and they're ready to use. Different vehicle types, such as SUVs or sedans, might have slight adjustments in their positioning, so it's good to refer to the manual for specifics. Ensuring they are on before driving in fog is crucial to avoid accidents. In short, while their position is fixed, their function should not be underestimated—understanding these details can enhance driving safety.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

What does the engine type approval number mean?

Engine type approval number is the code on the vehicle type approval certificate. Below are specific details about the engine type approval number: Meaning: The first two letters 'CN' represent China; followed by two letters - 'ZC' represents heavy-duty vehicles equipped with compression ignition engines; if it's 'QQ', it represents light-duty gasoline vehicles; 'QC' represents light-duty diesel vehicles; 'CJ' represents compression ignition engines; 'QL' represents light-duty dual-fuel vehicles. Additional information: The type approval certificate is used for motor vehicle type approval. Automobile manufacturers must apply for and obtain national approval for pollutant emission control performance type approval when producing and selling vehicles. The type approval application for a vehicle model should be submitted by the automobile manufacturer, covering aspects such as exhaust pollutants, crankcase pollutants, evaporative pollutants, durability of pollution control devices, and OBD systems for that vehicle model.
10
5
Share

How to use the built-in dash cam in Audi A3?

When connected to a computer via USB cable, the device will function as a disk storage, allowing file playback on the computer. When the device detects vibration, it will automatically lock and protect the current recording, preventing it from being overwritten. After enabling this function, the dash cam will automatically power on and start recording when it senses vibration, and will shut down again after approximately 20 seconds.
10
1
Share

How to Remove an Audi Door Handle?

Prepare the necessary tools for removing the door handle: a flat-head screwdriver and a T-20 Torx screwdriver. Open the car door, take out the flat-head screwdriver, and use it to pry off the small black cover. Take out the T-20 Torx screwdriver and use it to unscrew the bolt securing the lock cylinder. Store the removed bolt safely. Insert the flat-head screwdriver into the gap at the upper edge of the lock cylinder, pry out a small section, and then pull it out directly by hand.
1
0
Share

How to use the mirror heating function on Audi A6L?

After activating the rear window heating device, the mirrors will automatically turn on and heat up. The mirror heater activates with the rear window heater and automatically connects when the outside temperature is below 20°C. The mirrors heat according to external temperature. When the vehicle detects an external temperature below 20 degrees, it will automatically
5
4
Share

What to Do When the Envision Won't Start?

Simply turn the steering wheel forcefully while turning the key, and the steering wheel lock can usually be released quickly. Check if the battery has power. Failure to start may be due to a drained battery caused by leaving the headlights on for too long or the battery reaching the end of its lifespan. If the fuel gauge shows below the red line, the car naturally won't start. Also, pay attention to the quality of the fuel.
20
2
Share

How to Use the Audi Electronic Gear Shift?

When parking, press the P button on top of the gear lever to engage the parking gear. Pull the gear lever backward once, and the "D" light on the gear lever will illuminate. After shifting to D gear, the electronic gear lever automatically returns to its original position. First, press the unlock button on the left side of the gear lever and hold it down. Then, push the gear lever forward until "R" lights up. The paddle shifters behind the steering wheel—pulling the left and right paddles shifts up and down respectively.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.