···
Log in / Register

Where Are the Drain Holes Located on the Honda Vezel?

6Answers
BrynleeLee
07/29/2025, 04:19:18 AM

The drain holes of the Vezel are located inside the rubber strip at the very bottom of the doors. Additional information: 1. Introduction to the Vezel: The Vezel is the first SUV under GAC Honda, featuring standard equipment such as VSA (Vehicle Stability Assist) system, HSA (Hill Start Assist) system, high-sensitivity rear parking sensors with 4 probes, power side mirrors, and rearview dynamic reminder system. 2. Safety features: The Vezel adopts Honda's new-generation ACE (Advanced Compatibility Engineering) body structure. By utilizing high-strength steel materials and reinforcing the skeletal structure, it achieves high-level collision safety performance. Results from various crash tests conducted internally by Honda indicate that the Vezel meets the C-NCAP five-star safety standard.

Was this review help?
113
Share
ZaneDella
08/13/2025, 12:46:19 AM

I used to drive a Honda Vezel and found that there are several key drainage points that are quite important. For example, the door drainage holes are located at the bottom edge of the door—you can see small holes near the lower part of the door frame, usually two, designed to drain rainwater. The sunroof drainage outlets are at the corners of the sliding tracks, one on each side, and they tend to accumulate fallen leaves, leading to clogs. There are also drainage points under the hood, such as below the windshield, where rainwater flows out. The air conditioning drainage outlet is typically located beneath the dashboard, near the firewall, to discharge condensation water. If you don’t drive for a long time or park under trees, these areas are especially prone to clogging, which can cause water accumulation that corrodes the body or leaks into the car. I once experienced a sunroof leak, but after checking and clearing the drainage outlet, the issue was resolved. Regular simple cleaning is enough—no professional tools are needed. In short, every drainage point affects the vehicle’s durability, so paying attention to details is crucial.

Was this review help?
3
Share
Expand All
StFrank
10/05/2025, 01:37:12 AM

I enjoy tinkering with my car in my spare time, and the drainage outlets on the Honda Vezel are not hard to find. There are drainage holes at the bottom of the doors, mainly for rainwater runoff; there are also some near the sunroof tracks—just gently open the tracks when the sunroof is closed to spot the small outlets. Under the hood, they're located along the lower edge of the windshield or near the wipers. The AC drainage outlet is mostly under the chassis or behind the dashboard. On a weekend, just open the door, squat down, and inspect the bottom—use a thin stick to clear any debris if needed. I’ve done it myself once and saved on repair costs. Keeping them clear prevents rust or leaks, and if you’re worried about visibility, use your phone’s flashlight for better lighting. Just make sure the outlets don’t get clogged with mud, ensuring safer driving in the rain.

Was this review help?
15
Share
Expand All
KarterDella
11/18/2025, 02:08:47 AM

I've driven the Vezel for several years. Pay attention to the drainage outlets at the bottom of the doors, around the sunroof, under the windshield, and near the air conditioning. The most common clogging point in the doors is right below the door frame. Regularly check these areas and use a brush to clear debris, otherwise water accumulation in the car can be difficult to handle.

Was this review help?
13
Share
Expand All
Arya
01/08/2026, 03:45:17 AM

From a safety perspective, the Honda Vezel's drainage outlets are designed at the lower edge of the doors, sunroof sliding tracks, and under the hood of the chassis. If clogged, there is a high risk of water accumulation inside the car or rust formation, making driving in rainy weather more dangerous. I recommend a simple monthly check to prevent minor issues from escalating.

Was this review help?
18
Share
Expand All
StDaniella
04/05/2026, 02:13:27 AM

The drainage outlets are located at the bottom of the doors, around the sunroof, and beneath the air conditioning system. Keeping these clear is crucial for extending component lifespan. For example, a clogged AC drain can lead to moisture buildup, breeding bacteria that affect health. Clearing them yourself only takes a few minutes.

Was this review help?
13
Share
Expand All
More Q&A

How to Solve the Abnormal Noise When the Baojun 730 Passes Over Bumps?

The solution to abnormal noise when the Baojun 730 passes over bumps is: 1. Check if the shock absorber is leaking oil; 2. Determine which suspension is producing the noise; 3. Press down on the upper part of the suspension for each wheel to identify the faulty shock absorber; 4. Replace the faulty shock absorber. The Baojun 730 is a 5-door, 7-seat MPV with body dimensions of 4780mm in length, 1780mm in width, and 1740mm in height, with a wheelbase of 2750mm. It is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 108 kW and a maximum torque of 250 Nm. The drive system is front-wheel drive, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
112
Share

What kind of oil is best for door hinges?

It is recommended to use the specialized HOTO-LUBE door hinge and slide grease from 4S maintenance shops. Here are the relevant details: 1. Do not use Vaseline, engine oil, or vegetable oil for hinge lubrication. These lubricants are liquid-based and only provide temporary relief, becoming ineffective after a few rains. 2. Industrial engine oil emits harmful odors, which are detrimental to health. Ordinary grease has poor low-temperature resistance and may freeze in winter. Additional information: 1. The function of door hinges is similar to that of regular hinges, both used to connect two objects. 2. Common connection methods for door hinges mainly include bolt connection, welded connection, and welded + bolt connection.
113
Share

How long is the Audi A3 sedan?

The Audi A3 sedan has a length of 4351mm, a width of 1815mm, and a height of 1458mm, with a wheelbase of 2630mm. It is a compact 5-door, 5-seat hatchback with front-wheel drive. The front suspension uses MacPherson strut independent suspension, while the rear suspension employs a multi-link independent suspension. The Audi A3 is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW at 5000 to 6000 rpm and a maximum torque of 250 Nm at 1750 to 3000 rpm.
111
Share

What Causes Abnormal Noise When Accelerating a Car?

Reasons for abnormal noise when accelerating a car: 1. Fuel pump motor noise: When internal wear or impurities exist in the fuel pump motor, abnormal noise occurs upon acceleration. This issue requires fuel pump replacement. 2. Throttle body noise: Modern throttle bodies use electronic control, with motors naturally controlling valve opening/closing. Gear wear in the motor causes insufficient engagement and noise. Excessive carbon deposits or sludge in the throttle body can also cause noise. Cleaning the throttle body may help, but motor damage requires throttle body disassembly and servo motor replacement. 3. Poor lubrication in accelerator pedal bearings: Apply grease to the bearings for lubrication. 4. Clutch release bearing damage causing incomplete clutch disc separation: Remove the clutch and replace the release bearing.
110
Share

What is the working condition table for XCMG 80l6?

The working condition table for XCMG 80l6 is the lifting performance table for the XCMG 80-ton crane's main boom, including boom length (with outriggers fully extended) and working radius (m) such as 12.0m, 2.5, 3.0, 3.5, etc. Classification of license plate colors: There are four background colors for vehicle license plates, namely blue, yellow, white, and black. National license plate standards: The size of license plates for large vehicles is front: 440*140 (same as small vehicles); rear: 440x220. According to the 'Motor Vehicle Registration Regulations', medium-sized buses, large buses, and urban buses have yellow license plates; medium-sized trucks, large and medium-sized trucks, and trailers also have yellow license plates. The type of vehicle is determined based on the vehicle's factory certification.
105
Share

How to Make a Proper U-turn with a Car?

To make a proper U-turn with a car, follow these steps: 1. Shift into P or N gear and activate the low-range four-wheel drive mode; 2. Change to D gear, engage the crawl mode, and release the brake; 3. Once the car is in automatic driving mode, turn the steering wheel to a certain angle and use the speed button to control the speed. Things to pay attention to when making a U-turn: 1. Check if the intersection allows U-turns; 2. Ensure there are no oncoming vehicles; 3. On wider roads, try to make a large loop for a single smooth U-turn. Intersections where U-turns are permitted include: 1. Intersections with U-turn signs; 2. Intersections without explicit no U-turn or no left-turn signs; 3. Areas with yellow grid lines.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.