Where are the car brake pads located?

2 Answers
LeAriana
07/24/25 9:38am
The car's brake pads are located in the four wheel hubs of the car. During daily driving, it is important to pay attention to: 1. Regular maintenance, especially before driving on highways. Always check if the brake pads are in good condition to ensure safety. 2. Avoid sudden braking, as frequent sudden braking will accelerate the wear of the brake pads. 3. Avoid water immersion to prevent corrosion of the brake pads. Extended content: 1. Brake pads are the most important component in a car's braking system. They are generally composed of a steel plate, friction blocks, and a heat insulation layer. They generate friction by pressing against the brake disc during braking to achieve deceleration. 2. The heat insulation layer is made of non-heat-conductive materials to provide thermal insulation. The friction blocks consist of friction materials and adhesives. Due to friction, the friction blocks will gradually wear out. Generally, the lower the cost of the brake pads, the faster they wear out. Once the friction material is used up, the brake pads should be replaced promptly. Otherwise, the steel plate will come into direct contact with the brake disc, eventually leading to loss of braking effectiveness and damage to the brake disc.
Was this review help?
8
4
Share
OGianna
08/11/25 4:58am
As an enthusiast who often helps friends with car issues, I know the exact location of brake pads is actually inside the wheel. When you remove the wheel, you can see the braking system: in disc brakes, the brake pads are sandwiched between the metal brake disc and the caliper, which is fixed to the suspension or axle; in drum brakes, the pads are hidden inside that large round drum, pressed against the drum wall. Positioned near the hub and steering knuckle, they're designed to be concealed but prone to wear. I recommend regular inspections, like checking the thickness every 10,000 kilometers—replace them if they're too thin, as inadequate braking is dangerous. When DIY-ing, first ensure the car is stable, lift it with a jack, and check if the pads are centered to avoid uneven friction damaging other components. Don't underestimate this location—it directly affects deceleration efficiency and driving safety. Pay attention to brake noises; squeaking might be a warning sign.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

How Many Hours Does It Take to Change Car Engine Oil?

This is a simple operation process that takes about 1 hour. However, it should also be noted that if anti-wear agents are used, they should be added after the engine oil is poured in. Adding too much oil will make the car lack torque, while too little will increase engine wear, so car owners should pay extra attention when changing the oil. Additionally, when disposing of used oil, be careful not to pour it on the ground or into the sewer. It is recommended to seal the used oil and hand it over to designated recycling agencies for centralized processing. Here are the steps for changing car engine oil: 1. Wait for the engine temperature to drop, which also allows the oil to flow back into the oil pan. 2. Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out. 3. Use a special wrench to remove the oil filter; apply oil to the oil seal of the new oil filter and tighten it clockwise by hand. 4. Pour the new oil into the engine valve cover filler port, usually filling about three-quarters of the oil container. 5. Start the engine and let it run for 5 minutes, then check for oil leaks around the oil drain plug and oil filter. If there are any leaks, perform necessary repairs. 6. After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.
5
0
Share

What is the general speed limit in urban areas?

Motor vehicles driving on the road must not exceed the speed indicated by speed limit signs or markings; on roads with two or more motor vehicle lanes in the same direction without speed limit signs or markings, the maximum speed on urban roads is 70 kilometers per hour, while the maximum speed on closed motor vehicle-only roads and highways is 80 kilometers per hour. Relevant information about speed limits is as follows: 1. Introduction to speed limits: Speed limits usually refer to the regulation of vehicle speeds within a certain numerical range over a specified distance. 2. Purpose of speed limits: The main purpose is to pre-warn drivers to reasonably control their speed in subsequent sections of the road ahead, prevent the dangers of speeding, and ensure driving safety. Speed limits are an indispensable and most important part of road transport safety.
4
0
Share

Does Vehicle Damage Coverage Include Water Immersion and Spontaneous Combustion?

Vehicle damage coverage includes water immersion and spontaneous combustion. Under the principle of not significantly increasing consumer premium expenses, the industry is encouraged to expand the scope of commercial auto insurance coverage. The industry is guided to enhance the main clauses of the motor vehicle demonstration product's vehicle damage insurance by adding coverage for risks such as whole-vehicle theft, glass breakage, spontaneous combustion, engine water immersion, waiver of deductible, and inability to locate a third party, on top of the existing insurance liabilities. Relevant information about compulsory traffic accident liability insurance is as follows: 1. Introduction: The full name of compulsory traffic accident liability insurance is "Compulsory Traffic Accident Liability Insurance for Motor Vehicles." It is a mandatory liability insurance where the insurance company compensates for personal injuries, deaths, and property losses (excluding the vehicle's occupants and the insured) caused by road traffic accidents involving the insured motor vehicle, within the liability limits. 2. Necessity: Compulsory traffic accident liability insurance ensures that victims of motor vehicle road traffic accidents receive compensation and promotes road traffic safety. It provides timely and basic protection for traffic accident victims.
14
1
Share

What is the function of the circular button on the car key?

The circular arrow button on the car key is used to start the engine. When outside the vehicle, first press the lock button, then hold down the engine start button for more than three seconds to start the car. A car key is a tool for turning the car on and off. Modern car keys all use chips, which are part of a magnetic chip system. There are three main reasons why a car key may fail: 1. Car key issues: During daily use, car keys may run out of battery. When driving, pay attention to how you use the car key—lock and unlock the car at a closer distance, as the farther the remote range, the more power it consumes. Avoid pressing the remote lock button multiple times when locking the car. 2. Car issues: When the car's battery is low on power. 3. Environmental issues: If the car is parked in an area with a strong magnetic field. Additionally, there may be intentional human interference, mainly from criminals deliberately using car remote signal jammers.
15
0
Share

Is the dash cam on when the car is not started?

The dash cam can still be used when the car is not started. This is because the dash cam has a built-in battery, although its capacity is not large and cannot be used alone for too long. Generally, dash cams are connected to the car's cigarette lighter for power, and the Kailide dash cam is no exception. Another method to turn on the dash cam when the car is not started is to connect it to a power bank for charging. Relevant information about dash cams is as follows: 1. Introduction: A dash cam is a device that records images, sounds, and other related information during vehicle travel. 2. Function: After installing a dash cam, it can record the entire driving process of the car, including video images and sounds, which can provide evidence for traffic accidents.
16
5
Share

Should the handbrake be lowered or raised when starting the car?

When starting the car, the handbrake needs to be lowered, and when parking, the handbrake needs to be pulled up. The commonly referred to "releasing the handbrake" means lowering the handbrake. For small cars, the handbrake is sometimes located behind the transmission, where there is a brake disc connected to the drive shaft, similar to a disc brake (though drum brakes are also used). The braking force is transmitted via a cable to achieve parking braking. Relevant information about braking is as follows: 1. Introduction: Refers to the action of stopping or reducing the speed of running locomotives, vehicles, other transport tools, or machinery. 2. Principle: The general principle of braking is to fix a wheel or disc on the high-speed shaft of the machine, and install corresponding brake shoes, bands, or discs on the machine base, which generate braking torque under external force.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.