When is the first maintenance for Volkswagen?

How to Turn Off the Auto Start-Stop Function in Audi A4L?

Audi A4L auto start-stop function can be turned off by pressing the switch button located on the left side of the gear shift, next to the auto hold button. Pressing it once will deactivate the auto start-stop. Almost all vehicle models have the auto start-stop function enabled by default, requiring manual deactivation when needed, and it cannot be permanently turned off. The auto start-stop function automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when it's time to move forward again. The Audi A4L is a mid-size sedan with body dimensions of 4761mm in length, 1826mm in width, and 1439mm in height.

4

Share

What to Do When the Electronic Parking Brake Malfunctions?

Solutions for electronic parking brake malfunctions are: 1. If the fault occurs after replacing the rear brake pads, the electronic brake should be relearned and matched; 2. If the fault occurs without replacing the rear brake pads, check whether the fuse and the circuit at the electronic parking brake switch are normal. The method of using the electronic parking brake is: 1. Activate the electronic parking brake: Step on the brake pedal and pull up the electronic parking brake switch until the indicator light on the dashboard lights up, and the indicator light on the parking brake switch also lights up; 2. Deactivate the electronic parking brake: Press the electronic parking brake switch while stepping on the brake, and the indicator lights on the dashboard and the switch will turn off.

1

3

Share

Will Insurance Cover Water-Damaged Cars?

Whether you can claim compensation from the insurance company for a water-damaged car depends on the following scenarios: 1. If the vehicle only has third-party liability insurance, the insurance company will not provide compensation. 2. If the vehicle has comprehensive car insurance (also known as collision insurance), you can claim compensation from the insurance company, but damages to the engine are usually not covered. 3. If the vehicle has additional water damage coverage (also known as engine protection insurance), all damages to the vehicle, including engine damage, will be covered. 4. If the driver forcibly starts the engine after the vehicle is submerged in water, causing engine damage, even with comprehensive car insurance and water damage coverage, the insurance company will not compensate for the engine damage. They will only cover repair costs for other parts of the vehicle.

12

3

Share

What is the normal temperature for Dayun Automobile's water temperature gauge?

The normal temperature for Dayun Automobile's water temperature gauge is around 90 degrees. Engine temperature: The engine temperature is usually sensed by the water temperature sensor, so the normal engine temperature is often associated with the water temperature. Typically, the optimal engine water temperature is 90 degrees, but the temperature varies under different operating conditions. In a cold engine state, it may be around 85 degrees, while in a hot engine state, the water temperature can exceed 100 degrees. Reasons for high engine water temperature: Prolonged water circulation during engine operation can cause the coolant in the engine cooling system to gradually deplete, leading to insufficient coolant in the radiator. If the owner fails to promptly inspect, detect, and replenish the coolant, this can easily result in the engine water temperature becoming too high.

10

2

Share

Does a car need brake fluid replacement?

Yes, a car needs brake fluid replacement. The replacement method is as follows: 1. Park the vehicle on level ground and turn off the engine, open the engine compartment cover and drain the fluid from the reservoir; 2. Fill the reservoir with new brake fluid; 3. Jack up the vehicle and start removing the tires from the rear wheels; 4. Remove the rubber dust cap on the brake caliper; 5. Loosen the bleeder screw and attach a rubber tube to it, connecting it to a drain bottle; 6. Press the brake pedal inside the car and observe the draining process until the fluid level in the engine compartment reservoir reaches the lower limit. Precautions for using brake fluid include: 1. Avoid mixing with gasoline or engine oil; 2. Replace it regularly; 3. Choose high-quality brake fluid.

17

5

Share

What are the length, width, and height of the Volvo XC60?

The length, width, and height of the Volvo XC60 are: 4688mm, 1902mm, and 1658mm respectively. Taking the 2020 Volvo XC60 as an example, it belongs to the mid-size SUV category, with a wheelbase of 2865mm, a fuel tank capacity of 60 liters, and a luggage compartment volume ranging from 483 to 1410 liters. The curb weight is 1801kg. The 2020 Volvo XC60 features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 190PS, a maximum power of 140kW, and a maximum torque of 300Nm. It is paired with an 8-speed automatic transmission.

10

3

Share

When is the first maintenance for Volkswagen?

How to Turn Off the Auto Start-Stop Function in Audi A4L?

What to Do When the Electronic Parking Brake Malfunctions?

Will Insurance Cover Water-Damaged Cars?

What is the normal temperature for Dayun Automobile's water temperature gauge?

Does a car need brake fluid replacement?

What are the length, width, and height of the Volvo XC60?

Can a new car without a license plate enter the parking lot?

What are the effects of high temperature on a car engine?

Will the car battery drain if the air conditioner is left on when the engine is turned off?

Why won't the car start when it's out of engine oil?