When Can You Enter the Left-Turn Waiting Area?

1 Answers
KarterMarie
07/25/25 1:14pm
Conditions for entering the left-turn waiting area: 1. When both the straight and left-turn signals are red, left-turning vehicles are prohibited from entering the waiting area and should queue behind the stop line until permitted to proceed; 2. When the straight signal in the same direction turns green (while the left-turn signal remains red), left-turning vehicles should enter the waiting area in order and wait to turn left. When the left-turn signal subsequently turns green, vehicles in the waiting area should proceed left through the intersection in sequence; 3. When the left-turn signal is red (or yellow), left-turning vehicles that have not entered the waiting area should stop behind the stop line and wait, not entering the waiting area. Left-turning vehicles already in the waiting area should continue to turn left through the intersection without stopping, ensuring smooth traffic flow at the intersection.
Was this review help?
17
3
Share
More Forum Discussions

How Long Does a Minor Maintenance Take?

Generally speaking, the car maintenance cycle is every 5,000 or 10,000 kilometers or every six months, depending on the effective time or mileage of the engine oil and oil filter used in the car. The validity periods of mineral oil, semi-synthetic oil, and fully synthetic oil of different brand grades are also different. Regular maintenance is divided into the following aspects: 1. Engine oil: Every 5,000-10,000 kilometers is the best replacement cycle. If the replacement cycle is too long, it will cause wear inside the engine. In addition, vehicles used less frequently should have their oil changed every six months, as the oil will deteriorate over time and can no longer protect the engine. 2. Oil filter: If the filter becomes dirty, even if the oil is changed, its effectiveness will be reduced. It is very effective to replace the oil filter at the same time as the oil. 3. Antifreeze: When traveling in cold regions, do not forget to increase the concentration of antifreeze. Generally, the antifreeze concentration is about 30%. To prevent freezing, an optimal guarantee of 40-50% is required.
12
3
Share

What Causes Abnormal Noises When Reversing a Car?

There are many reasons for abnormal noises when reversing a car, including tire damage, shock absorber issues, transmission problems, and brake pad issues. Below are detailed explanations: 1. Tire Damage: If the car tire has a bulge, it can cause noise when reversing or moving. The solution is simple—just repair or replace the tire. 2. Shock Absorber Issues: When the car's shock absorbers have problems, noise may also occur when turning or driving on bumpy roads. This situation requires replacing the shock absorbers at a repair shop or 4S store. 3. Transmission Problems: If the car's transmission has issues, such as damaged reverse gears, friction can cause noise. This requires opening the transmission to inspect and replace the gears. 4. Brake Pad Issues: Brake pad problems are a common cause of car noise, including improper installation, severe wear, or foreign objects stuck between the pads and calipers. The specific situation requires removing the tire to inspect the brake pads and then performing repairs or replacing the pads if necessary.
10
2
Share

What are the functions of the automatic transmission gears in the Haval Chitu?

Haval Chitu automatic transmission gear functions introduction: 1. D (Drive) Gear: This is the most frequently used gear. The D gear represents the forward driving gear, used for normal driving. Simply place the gear selector in the D position, and the car will automatically adjust gears while driving. During long downhill descents, because the D gear in automatic transmission cars does not have the engine braking function, it is not advisable to keep it in D gear, otherwise the speed will increase, leading to potential safety hazards. 2. P (Park) Gear: Used when parking. P means to move the gear selector to the P position when parking, locking the transmission's parking brake device to the output shaft. Tighten the hand brake, and the car will not move. 3. N (Neutral) Gear: This gear is rarely used, mainly during traffic light stops. N represents neutral, used when starting the car or towing. If waiting at a traffic light for a long time, it's best to shift into N gear and tighten the handbrake. However, coasting in N gear downhill is prohibited as it not only doesn't save fuel but also damages the transmission. 4. R (Reverse) Gear: R gear is the reverse gear, used when reversing. Do not shift into reverse gear before the car has completely stopped, otherwise, the transmission will wear out quickly. The car is equipped with a reverse camera, which will display on the central screen when R gear is engaged. 5. L (Low) Gear: Equivalent to 2nd gear, often used when going up or down hills. For example, when climbing a hill and the power is insufficient, shifting into L gear makes hill starts easier. In fact, shifting into L gear limits the car's automatic gear shifting to the lowest gear only. 6. S (Sport) Mode: Some models are equipped with an S gear. When the car is in S gear, it allows free gear shifting, but the shifting will be delayed. Therefore, the engine will maintain high RPM for a longer time, increasing fuel consumption, but also providing greater torque output, usually used when overtaking.
8
2
Share

What Causes the Intermittent Operation of the Buick Excelle Windshield Wiper?

The intermittent operation of the Buick Excelle windshield wiper is due to an internal short circuit in the wiper motor. The wiper linkage has multiple connection points, and observing the wiper's operation can help determine if the linkage is faulty. Importance of the Wiper: Among all automotive components, the windshield wiper is relatively small. However, it is crucial as it ensures clear visibility during rainy weather. According to an international driving safety survey, the accident rate caused by aging wipers during rainy conditions is approximately five times higher than usual. Beam-style wipers distribute pressure evenly across the entire force-conducting strip, ensuring uniform force application on the wiper blade. This reduces the occurrence of water streaks and scratches, delivering better wiping performance. Additionally, they significantly reduce vibration wear and offer advantages such as even force distribution, sun protection, simple structure, and lighter weight. As a result, the lifespan of the wiper motor and blade is at least doubled compared to conventional wipers, making them more economical and reliable. Checking the Wiper Motor: After opening the car hood, the wiper motor can be seen. Touching the motor by hand—if it feels hot—indicates an internal short circuit, and replacing the motor will resolve the issue. Checking the Wiper Blades: Neglecting wiper blade maintenance may lead to severe damage, rendering them ineffective during rain. In such cases, replacing the blades promptly is necessary. Checking the Wiper Linkage: The wiper linkage has multiple connection points, and issues here can disrupt normal operation. Observing the wiper's movement helps determine if the linkage is faulty. Checking the Wiper Fuse: To protect the car's electrical system, each electrical device has a fuse. If the wiper fails to function, inspect whether the wiper fuse is blown and replace it with a spare fuse if needed. Checking the Wiper Switch: Although the wiper switch is not frequently used, automotive electronics can be unstable. If no issues are found in the above checks, the wiper switch might be faulty. Using a multimeter to test the switch or replacing it with a new one for testing is advisable.
17
5
Share

What to Do When the Windshield Fogs Up Outside While Using Air Conditioning in Summer?

For situations where fogging has already occurred, in severe cases, you can first use the windshield wipers to remove it, then appropriately direct some warm air towards the windshield, and the fog will dissipate immediately. Related explanations are as follows: 1. Temperature Difference: In summer, the air is humid. When the cabin air conditioner is turned on for a while (especially when the temperature is set very low), the cabin temperature becomes much lower than the outside air temperature, and the windshield temperature also decreases accordingly. 2. Principle: When the windshield temperature drops to the dew point of water vapor, the moisture in the air will condense upon contact with the windshield. Since the air's moisture content is insufficient to form water droplets, it can only form tiny water particles. Due to water's surface tension, numerous small water particles connect to form a thin layer of fog.
2
4
Share

What to Do If You Can't Pass the Driving Test (Subject 3)?

Practice makes perfect. Subject 3 is not insurmountable. With sufficient practice time and grasping the essence of the training, anyone with normal intelligence can definitely pass. The key lies in persistent practice and remembering the various tips taught by the instructor. Below are some driving school practice considerations: 1. Maximize practice opportunities: Some learners practice intermittently without consistency - this approach won't work. Strive for more practice time. 2. Master technical maneuvers: Firmly remember the technical actions taught by the instructor. These maneuvers are essentially tricks that prove extremely useful when mastered. 3. Seek advice from experienced drivers: Consult frequently with skilled drivers around you to deepen your understanding. Only through proper comprehension can you drive well. 4. Strictly follow standards: During training, the instructor's teachings might differ from conventional wisdom. While driving lessons may seem dogmatic, strict adherence is necessary. 5. Think critically: If certain maneuvers aren't executed perfectly initially, there's room for correction. Therefore, engage in active thinking to analyze why mistakes occur, facilitating better progress.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.